USB issues: device descriptor read/64, error -110

[bdfoster89]

Hello all. First post.

I'm having issues with getting my USB ports to work on my server. USB keyboards, mice, drives, flash drives, card readers, etc. will not work on this server.

Here's some preliminary diagnostic information. Let me know if you need anything else.


dmesg
[code]
Linux version 2.6.18-194.32.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jan 5 17:53:09 EST 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable)
BIOS-e820: 000000007ffe0000 - 000000007ffefc00 (ACPI data)
BIOS-e820: 000000007ffefc00 - 000000007ffff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524256
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294880 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL ) @ 0x000fdc40
ACPI: RSDT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdc54
ACPI: FADT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdc84
ACPI: MADT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdcf8
ACPI: SPCR (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdd80
ACPI: DSDT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7ffff000:7ec01000)
Detected 2785.203 MHz processor.
Built 1 zonelists. Total pages: 524256
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
mapped IOAPIC to ffffa000 (fec02000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0769000 soft=c0749000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071076k/2097024k available (2180k kernel code, 24696k reserved, 910k data, 228k init, 1179520k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5570.40 BogoMIPS (lpj=2785203)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 11000
CPU 1 irqstacks, hard=c076a000 soft=c074a000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5569.42 BogoMIPS (lpj=2784712)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 2/6 eip 11000
CPU 2 irqstacks, hard=c076b000 soft=c074b000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5569.20 BogoMIPS (lpj=2784603)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 3/7 eip 11000
CPU 3 irqstacks, hard=c076c000 soft=c074c000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5569.06 BogoMIPS (lpj=2784534)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
Total of 4 processors activated (22278.10 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Using local APIC timer interrupts.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=32,816
checking if image is initramfs... it is
Freeing initrd memory: 3187k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc91e, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI4] (0000:04)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.ZION._PRT]
ACPI: PCI Root Bridge [PCI3] (0000:03)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 *5 6 7 10 11 12 14)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0a: ioport range 0x800-0x89f could not be reserved
pnp: 00:0a: ioport range 0x8a0-0x8af has been reserved
pnp: 00:0a: ioport range 0xc00-0xcd7 has been reserved
pnp: 00:0a: ioport range 0xf50-0xf58 has been reserved
pnp: 00:0a: ioport range 0x8e0-0x8e3 has been reserved
PCI: Bridge: 0000:04:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1296530582.154:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 59F555817D939EA9
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:0e.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:04.1[B] -> GSI 23 (level, low) -> IRQ 177
0000:00:04.1: ttyS2 at I/O 0xec80 (irq = 177) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 410k
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfe100000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Adaptec aacraid driver 1.1-5[2461]
ACPI: PCI Interrupt 0000:04:08.1[A] -> GSI 30 (level, low) -> IRQ 185
AAC0: kernel 2.8-1[7692]
AAC0: monitor 2.8-1[7692]
AAC0: bios 2.8-1[7692]
AAC0: serial 883461D3
scsi0 : percraid
Vendor: DELL Model: Primary Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 142182912 512-byte hdwr sectors (72798 MB)
sda: Write Protect is off
sda: Mode Sense: 06 00 00 00
SCSI device sda: drive cache: write through
SCSI device sda: 142182912 512-byte hdwr sectors (72798 MB)
sda: Write Protect is off
sda: Mode Sense: 06 00 00 00
SCSI device sda: drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi removable disk sda
Vendor: SEAGATE Model: ST336753LC Rev: DX10
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST336753LC Rev: DX10
Type: Direct-Access ANSI SCSI revision: 03
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Vendor: PE/PV Model: 1x5 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI revision: 02
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1296530613.064:2): selinux=0 auid=4294967295 ses=4294967295
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
tg3.c:v3.106 (January 12, 2010)
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 28 (level, low) -> IRQ 193
eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:06:5b:ff:0f:45
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769c4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 29 (level, low) -> IRQ 201
eth1: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:06:5b:ff:0f:46
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769c4000] dma_mask[64-bit]
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
input: PC Speaker as /class/input/input2
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:1:0:0: Attached scsi generic sg1 type 0
scsi 0:1:1:0: Attached scsi generic sg2 type 0
scsi 0:1:6:0: Attached scsi generic sg3 type 3
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4128760k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:4128760k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.4.0
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
dahdi: Registered tone zone 0 (United States / North America)
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
AAC:Battery charge is now OK
dahdi: Detected time shift.
dahdi: Detected time shift.
dahdi: Detected time shift.
dahdi: Detected time shift.
ohci_hcd 0000:00:0f.2: wakeup
usb 1-3: new full speed USB device using ohci_hcd and address 2
usb 1-3: device descriptor read/64, error -110
usb 1-3: device descriptor read/64, error -110
usb 1-3: new full speed USB device using ohci_hcd and address 3
usb 1-3: device descriptor read/64, error -110
usb 1-3: device descriptor read/64, error -110
usb 1-3: new full speed USB device using ohci_hcd and address 4
usb 1-3: device not accepting address 4, error -110
usb 1-3: new full speed USB device using ohci_hcd and address 5
usb 1-3: device not accepting address 5, error -110
ohci_hcd 0000:00:0f.2: wakeup
usb 1-3: new full speed USB device using ohci_hcd and address 6
usb 1-3: device descriptor read/64, error -110
usb 1-3: device descriptor read/64, error -110
usb 1-3: new full speed USB device using ohci_hcd and address 7
usb 1-3: device descriptor read/64, error -110
usb 1-3: device descriptor read/64, error -110
usb 1-3: new full speed USB device using ohci_hcd and address 8
usb 1-3: device not accepting address 8, error -110
usb 1-3: new full speed USB device using ohci_hcd and address 9
usb 1-3: device not accepting address 9, error -110
[/code]

tail -f /var/log/messages
[code]
Feb 2 10:04:51 localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 6
Feb 2 10:04:52 localhost kernel: usb 1-3: device descriptor read/64, error -110
Feb 2 10:04:52 localhost kernel: usb 1-3: device descriptor read/64, error -110
Feb 2 10:04:52 localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 7
Feb 2 10:04:52 localhost kernel: usb 1-3: device descriptor read/64, error -110
Feb 2 10:04:52 localhost kernel: usb 1-3: device descriptor read/64, error -110
Feb 2 10:04:53 localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 8
Feb 2 10:04:53 localhost kernel: usb 1-3: device not accepting address 8, error -110
Feb 2 10:04:53 localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 9
Feb 2 10:04:53 localhost kernel: usb 1-3: device not accepting address 9, error -110
[/code]

[pschaff]

Welcome to the CentOS fora. Reading [url=https://www.centos.org/modules/newbb/viewforum.php?forum=47]FAQ & Readme First[/url] is recommended for new users.

Both too much and not enough information. Posting the entire unedited dmesg in-line is a bit much. Please consider editing out irrelevant info, or at least using pastebin.centos.org in the future.

Looks like possible IRQ issues or hardware problems. Have you checked BIOS settings and looked for BIOS updates? Please provide information as described in [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=25128&forum=47]How to provide information about your system[/url].

[gerald_clark]

Your machine appears to not have a USB2 controller, only USB1.

[eLusive]

Considering this is the first page that comes up, I think a solution to this problem is required other than what you've suggested.

I'm investigating it now.


My problem descript: unsafely removed USB device from Mac OS X 10.6.7 machine, plugged into Aus 701 eee pc, USB device failed with

usb 1-2: device descriptor read/64, error -71
usb 1-2: device not accepting address 9, error -71

[eLusive]

Sorry for double-post, but the forum won't let me edit my last post.

Solution to my problem was to remove a USB NIC i had plugged in.