Search found 250 matches

by tunk
2018/02/17 13:40:27
Forum: CentOS 7 - Software Support
Topic: libstdc++.so.6: version `CXXABI_1.3.9' not found
Replies: 2
Views: 70

Re: libstdc++.so.6: version `CXXABI_1.3.9' not found

Probably barking up the wrong tree: You're checking for the 32 bit version of the library, whereas it looks like your software is 64 bit?
Check and maybe reinstall the 64 bit version? Also, given that it worked up to yesterday, either the OS, setup or software must have changed?
by tunk
2018/02/16 12:33:56
Forum: CentOS 6 - Hardware Support
Topic: Need CPU support in 6.6
Replies: 9
Views: 346

Re: Need CPU support in 6.6

Will you retire the old system?
If so, I guess you had (still have?) a working system. Would it then be possible to setup the new system and use e.g. NFS to transfer the data?
by tunk
2018/02/16 12:06:39
Forum: CentOS 7 - General Support
Topic: Migrate boot from /(/dev/sda1) to /boot(/dev/sdb1)
Replies: 3
Views: 79

Re: Migrate boot from /(/dev/sda1) to /boot(/dev/sdb1)

Why do you want to do this?
What's your partition layout on sda and sdb? Is / still on sda?
Any error messages?
by tunk
2018/02/16 11:32:48
Forum: CentOS 7 - Software Support
Topic: tune Network Interface performance
Replies: 3
Views: 85

Re: tune Network Interface performance

I haven't done anything like this, but you may want to look at this: - most servers comes with several network interfaces: set up a separate network (maybe together with jumbo frames), i.e. you don't have to share it with other traffic - if it's a one time transfer: compress -> transfer -> decompres...
by tunk
2018/02/14 10:56:30
Forum: CentOS 7 - General Support
Topic: CentOS Crash. Cannot determine if it is a HW or SW issue
Replies: 2
Views: 73

Re: CentOS Crash. Cannot determine if it is a HW or SW issue

Run a memory test with e.g. memtest86+.
Use stresslinux to stress the CPU.
You could also try to reseat all internal cables, DIMMs, cards etc.
by tunk
2018/02/14 10:48:49
Forum: CentOS 7 - General Support
Topic: Using Ultrium 7 WORM tapes
Replies: 12
Views: 199

Re: Using Ultrium 7 WORM tapes

As suggested, use tar -xvf: x=extract, t=list.
And I seem to remember that it will extract to the current path, i.e. make sure you don't overwrite something important.
by tunk
2018/02/12 10:42:47
Forum: CentOS 7 - Hardware Support
Topic: CentOS7 and HighPoint RocketRAID 2720
Replies: 11
Views: 192

Re: CentOS7 and HighPoint RocketRAID 2720

Could you see if there's a firmware upgrade?
You could also take out the disks, connect them to non-RAID sata ports and wipe the beginning of the disk.
This may remove any remnants of RAID setups and MBR's.
by tunk
2018/02/11 22:21:56
Forum: CentOS 7 - Hardware Support
Topic: Centos 7 bug, on hp g5 using vga plugged on back vga connector and after plug on vga connector in frontal and restart
Replies: 1
Views: 51

Re: Centos 7 bug, on hp g5 using vga plugged on back vga connector and after plug on vga connector in frontal and restar

"... after plug the vga on frontal connector and restart the centos 7 don't boot with vga pluggled on back vga connector."

This is unclear - can you be more specific?
by tunk
2018/02/09 16:11:30
Forum: CentOS 7 - Networking Support
Topic: Access my server through my public ip
Replies: 10
Views: 480

Re: Access my server through my public ip

Sorry, 192.168.1.x in /etc/hosts will not work. First you have setup your router to allow fixed ip addresses - right now it looks like all are reserved for dhcp. Secondly you have to set the selected address on your server either by some GUI tool or editing the right file in /etc/sysconfig/network-s...
by tunk
2018/02/09 14:21:37
Forum: CentOS 6 - Networking Support
Topic: HTTP to HTTPS apache
Replies: 2
Views: 77

Re: HTTP to HTTPS apache

What have you tried? I assume you have aquired a certificate?
And you really, really should upgrade to CentOS 6.9.