[SOLVED] Update to Centos 6.4 results in no initramfs file
Posted: 2013/06/09 19:08:42
I updated my system from Centos 6.3 to 6.4 using the command:
yum update
That resulted in a kernel panic similar to one that has been described here before:
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: Autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "UUID=XXX" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.32-358.6.2.el6.x86_64 #1
Call Trace:
[] ? panic+0xa7/0x16f
[] ? mount_block_root+0x1ea/0x29e
[]? bstat+0x2a0/0x970
[] ? mount_root+0x56/0x5a
[] ? prepare_namespace+0x170/0x1a9
[] ? kernel_init+0x2e8/0x2fe
[] ? child_rip+0xa/0x20
[] ? kernel_init+0x0/0x2fe
[] ? child_rip+0x0/0x20
I was able to boot into an older version of the kernel (2.6.2-220.23.1.el6.x86_64), though.
I attempted:
yum reinstall kernel-2.6.2-358.6.2.el6.x86_64
This command completed, but with a warning:
Non-fatal POSTTRANS scriptlet failure in rpm package kernel-2.6.32-358.6.2.el6.x86_64
Curiously, there is no initramfs-2.6.32-358.6.2.el6.x86_64 to go with the vmlinuz-2.6.32-358.6.2.el6.x86_64 file.
So I attempted to make one:
dracut --mdadmconf --verbose initramfs-2.6.32-358.6.2.el6.x86_64 2.6.32-358.6.2.el6.x86_64
This results in:
...
I: Installing /sbin/blockdev
I: Installing /usr/share/dracut/modules.d/90dmsquash-live/parse-dmsquash-live.sh
I: Installing /usr/share/dracut/modules.d/90dmsquash-live/dmsquash-liveiso-genrules.sh
I: Installing /usr/share/dracut/modules.d/90dmsquash-live/dmsquash-live-root
I: Installing /lib/udev/rules.d/60-cdrom_id.rules
I: Installing /etc/modprobe.d/dist-alsa.conf
I: Installing /etc/modprobe.d/blacklist.conf
I: Installing /etc/modprobe.d/dist.conf
I: Installing /etc/modprobe.d/anaconda.conf
I: Installing /etc/modprobe.d/dist-oss.conf
Segmentation fault (core dumped)
So I can't seem to make the initramfs for this kernel.
Any suggestions?
Mike
I've appended the output from getinfo below.
Information for general problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.23.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-6-4.el6.centos.10.x86_64
nux-dextop-release-0-2.el6.nux.noarch
elrepo-release-6-5.el6.elrepo.noarch
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.4 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 15922 15758 164 0 412 14109
-/+ buffers/cache: 1236 14686
Swap: 32767 0 32767
== END free -m ==
== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-36.el6.x86_64
rpm-build-4.8.0-32.el6.x86_64
rpm-libs-4.8.0-32.el6.x86_64
rpm-python-4.8.0-32.el6.x86_64
yum-3.2.29-40.el6.centos.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-14.el6.noarch
yum-plugin-security-1.1.30-14.el6.noarch
yum-utils-1.1.30-14.el6.noarch
== END rpm -qa yum\* rpm-\* python | sort ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Vault.repo
elrepo.repo
epel.repo
linuxtech.repo
mondorescue.repo
nux-dextop.repo
pb.repo
plex.repo
rpmforge.repo
squeezecenter.repo
== END ls /etc/yum.repos.d ==
== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==
== BEGIN yum repolist all ==
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: mirrors.advancedhosters.com
* elrepo: mirror.symnds.com
* extras: mirrors.advancedhosters.com
* nux-dextop: li.nux.ro
* updates: mirror.net.cen.ct.gov
repo id repo name status
C6.0-base CentOS-6.0 - Base disabled
C6.0-centosplus CentOS-6.0 - CentOSPlus disabled
C6.0-contrib CentOS-6.0 - Contrib disabled
C6.0-extras CentOS-6.0 - Extras disabled
C6.0-updates CentOS-6.0 - Updates disabled
C6.1-base CentOS-6.1 - Base disabled
C6.1-centosplus CentOS-6.1 - CentOSPlus disabled
C6.1-contrib CentOS-6.1 - Contrib disabled
C6.1-extras CentOS-6.1 - Extras disabled
C6.1-updates CentOS-6.1 - Updates disabled
C6.2-base CentOS-6.2 - Base disabled
C6.2-centosplus CentOS-6.2 - CentOSPlus disabled
C6.2-contrib CentOS-6.2 - Contrib disabled
C6.2-extras CentOS-6.2 - Extras disabled
C6.2-updates CentOS-6.2 - Updates disabled
C6.3-base CentOS-6.3 - Base disabled
C6.3-centosplus CentOS-6.3 - CentOSPlus disabled
C6.3-contrib CentOS-6.3 - Contrib disabled
C6.3-extras CentOS-6.3 - Extras disabled
C6.3-updates CentOS-6.3 - Updates disabled
PlexRepo PlexRepo enabled: 12
base CentOS-6 - Base enabled: 6,381
c6-media CentOS-6 - Media disabled
centosplus CentOS-6 - Plus disabled
contrib CentOS-6 - Contrib disabled
debug CentOS-6 - Debuginfo disabled
elrepo ELRepo.org Community Enterprise Linux Repo enabled: 269
elrepo-extras ELRepo.org Community Enterprise Linux Extr disabled
elrepo-kernel ELRepo.org Community Enterprise Linux Kern disabled
elrepo-testing ELRepo.org Community Enterprise Linux Test disabled
epel EPEL RPM Repository for Red Hat Enterprise disabled
extras CentOS-6 - Extras enabled: 12
linuxtech LinuxTECH disabled
mondorescue rhel 6 x86_64 - mondorescue Vanilla Packag enabled: 108
nux-dextop Nux.Ro RPMs for general desktop use enabled: 1,233
nux-dextop-testing Nux.Ro RPMs for general desktop use - test disabled
pb rhel 6 x86_64 - pb Vanilla Packages enabled: 108
rpmforge RPMforge RPM repository for Red Hat Enterp disabled
squeezecenter-release SqueezeCenter Release Repository enabled: 25
squeezecenter-testing SqueezeCenter Branch Repository disabled
squeezecenter-unstable SqueezeCenter Trunk Repository disabled
updates CentOS-6 - Updates enabled: 768
repolist: 8,916
== END yum repolist all ==
== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== BEGIN cat /etc/fstab ==
#
# /etc/fstab
# Created by anaconda on Thu Jun 28 11:49:14 2012
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=3ba7d302-9223-418b-9027-36ad86804b38 / ext4 defaults 1 1
UUID=3b3e5a79-63da-4d22-b4c6-4a28f7fb1dee /boot ext4 defaults 1 2
UUID=0df2acd9-5c03-49b8-b94f-767d502ea0de swap swap defaults 0 0
UUID=b701a5a3-0125-486d-8afc-c8397636ca02 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sdc /mnt/usb_backup_1 ext4 rw,auto,sync,rw,user 0 0
/dev/sdd3 /backups/local/system ext2 noauto 0 0
== END cat /etc/fstab ==
== BEGIN df -h ==
Filesystem Size Used Avail Use% Mounted on
/dev/md1 1.8T 481G 1.3T 28% /
tmpfs 7.8G 4.0K 7.8G 1% /dev/shm
/dev/md0 485M 68M 392M 15% /boot
/dev/sdc 917G 476G 396G 55% /mnt/usb_backup_1
== END df -h ==
== BEGIN fdisk -lu ==
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007829d
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sda2 1026048 34580479 16777216 82 Linux swap / Solaris
/dev/sda3 34580480 3907028991 1936224256 fd Linux raid autodetect
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00093fda
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 1026047 512000 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sdb2 1026048 34580479 16777216 82 Linux swap / Solaris
/dev/sdb3 34580480 3907028991 1936224256 fd Linux raid autodetect
Disk /dev/md1: 1982.7 GB, 1982692454400 bytes
2 heads, 4 sectors/track, 484055775 cylinders, total 3872446200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdd1 1 1953525167 976762583+ ee GPT
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md0: 524 MB, 524275712 bytes
2 heads, 4 sectors/track, 127997 cylinders, total 1023976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
== END fdisk -lu ==
== BEGIN parted -l ==
Model: ATA WDC WD2003FYYS-0 (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 525MB 524MB primary ext4 boot, raid
2 525MB 17.7GB 17.2GB primary linux-swap(v1)
3 17.7GB 2000GB 1983GB primary raid
Model: ATA WDC WD2003FYYS-0 (scsi)
Disk /dev/sdb: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 525MB 524MB primary ext4 boot, raid
2 525MB 17.7GB 17.2GB primary linux-swap(v1)
3 17.7GB 2000GB 1983GB primary raid
Model: Hitachi HDS721010CLA332 (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 1000GB 1000GB ext4
Model: Hitachi HDS721010CLA332 (scsi)
Disk /dev/sdd: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 68.2MB 67.1MB fat16 boot
2 68.2MB 135MB 67.1MB ext2
3 135MB 1000GB 1000GB ext2
Model: Unknown (unknown)
Disk /dev/md1: 1983GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 1983GB 1983GB ext4
Model: Unknown (unknown)
Disk /dev/md0: 524MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 524MB 524MB ext4
== END parted -l ==
== BEGIN blkid ==
/dev/sdb1: UUID="44a7a908-4801-9f68-6765-cc85a0baa81d" UUID_SUB="096ab955-99e9-4527-c634-3916b0940d9d" LABEL="localhost.localdomain:0" TYPE="linux_raid_member"
/dev/sdb2: UUID="b701a5a3-0125-486d-8afc-c8397636ca02" TYPE="swap"
/dev/sdb3: UUID="2739fa98-5b50-ea52-dd5b-96b075d2b0a1" UUID_SUB="3f6b5107-1640-5f52-ea8c-7bbac35848c4" LABEL="localhost.localdomain:1" TYPE="linux_raid_member"
/dev/sda1: UUID="44a7a908-4801-9f68-6765-cc85a0baa81d" UUID_SUB="a630574d-4b2a-fc28-3863-d1f070182c95" LABEL="localhost.localdomain:0" TYPE="linux_raid_member"
/dev/sda2: UUID="0df2acd9-5c03-49b8-b94f-767d502ea0de" TYPE="swap"
/dev/sda3: UUID="2739fa98-5b50-ea52-dd5b-96b075d2b0a1" UUID_SUB="a8713a9b-9466-5853-5bf8-04f15a906cb6" LABEL="localhost.localdomain:1" TYPE="linux_raid_member"
/dev/md1: UUID="3ba7d302-9223-418b-9027-36ad86804b38" TYPE="ext4"
/dev/md0: UUID="3b3e5a79-63da-4d22-b4c6-4a28f7fb1dee" TYPE="ext4"
/dev/sdd1: SEC_TYPE="msdos" UUID="6F7C-79E4" TYPE="vfat"
/dev/sdd2: UUID="15fc6a66-7d56-45f8-8dde-bcbf16f54989" TYPE="ext2"
/dev/sdd3: UUID="9a0e6a7c-656a-4074-8b05-90a053b2d49b" TYPE="ext2"
/dev/sdc: UUID="a5a5f9d9-f050-4311-b7a0-fc0ea8a3a077" TYPE="ext4"
== END blkid ==
== BEGIN cat /proc/mdstat ==
Personalities : [raid1]
md0 : active raid1 sdb1[1] sda1[0]
511988 blocks super 1.0 [2/2] [UU]
md1 : active raid1 sdb3[1] sda3[0]
1936223100 blocks super 1.1 [2/2] [UU]
bitmap: 8/15 pages [32KB], 65536KB chunk
unused devices: <none>
== END cat /proc/mdstat ==
== BEGIN pvs ==
== END pvs ==
== BEGIN vgs ==
No volume groups found
== END vgs ==
== BEGIN lvs ==
No volume groups found
== END lvs ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.23.1.el6.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-2.6.32-358.6.2.el6.x86_64
kernel-firmware-2.6.32-358.6.2.el6.noarch
kernel-headers-2.6.32-358.6.2.el6.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller [8086:0108] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:16.1 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #2 [8086:1c3b] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5)
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5)
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
06:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
Bus 002 Device 003: ID 0926:000a
Bus 002 Device 004: ID 0926:000a
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
kmod-hfsplus-0.0-2.el6.elrepo.x86_64
== END rpm -qa kmod\* kmdl\* ==
== BEGIN ifconfig -a ==
bond0 Link encap:Ethernet HWaddr 00:25:90:75:92:BC
inet addr:192.168.2.20 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fe75:92bc/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:52234 errors:0 dropped:0 overruns:0 frame:0
TX packets:56743 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32813060 (31.2 MiB) TX bytes:24899613 (23.7 MiB)
eth0 Link encap:Ethernet HWaddr 00:25:90:75:92:BC
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:10576 errors:0 dropped:0 overruns:0 frame:0
TX packets:47491 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1304190 (1.2 MiB) TX bytes:23347351 (22.2 MiB)
Interrupt:16 Memory:f7c00000-f7c20000
eth1 Link encap:Ethernet HWaddr 00:25:90:75:92:BC
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:41658 errors:0 dropped:0 overruns:0 frame:0
TX packets:9252 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:31508870 (30.0 MiB) TX bytes:1552262 (1.4 MiB)
Interrupt:17 Memory:f7b00000-f7b20000
eth2 Link encap:Ethernet HWaddr 00:25:90:75:92:BE
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18 Memory:f7a00000-f7a20000
eth3 Link encap:Ethernet HWaddr 00:25:90:75:92:BF
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19 Memory:f7900000-f7920000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5248 errors:0 dropped:0 overruns:0 frame:0
TX packets:5248 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2122110 (2.0 MiB) TX bytes:2122110 (2.0 MiB)
== END ifconfig -a ==
== BEGIN brctl show ==
bridge name bridge id STP enabled interfaces
== END brctl show ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 bond0
169.254.0.0 0.0.0.0 255.255.0.0 U 1006 0 0 bond0
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 bond0
== END route -n ==
== BEGIN sysctl -a | grep .rp_filter ==
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.lo.rp_filter = 1
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth1.rp_filter = 1
net.ipv4.conf.eth1.arp_filter = 0
net.ipv4.conf.eth2.rp_filter = 1
net.ipv4.conf.eth2.arp_filter = 0
net.ipv4.conf.eth3.rp_filter = 1
net.ipv4.conf.eth3.arp_filter = 0
net.ipv4.conf.bond0.rp_filter = 1
net.ipv4.conf.bond0.arp_filter = 0
== END sysctl -a | grep .rp_filter ==
== BEGIN ip rule show ==
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
== END ip rule show ==
== BEGIN ip route show ==
192.168.2.0/24 dev bond0 proto kernel scope link src 192.168.2.20
169.254.0.0/16 dev bond0 scope link metric 1006
default via 192.168.2.1 dev bond0
== END ip route show ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search michaelphelpsmd.com
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
nameserver 192.168.2.1
nameserver 8.8.8.8
== END cat /etc/resolv.conf ==
== BEGIN egrep 'net|hosts' /etc/nsswitch.conf ==
#hosts: db files nisplus nis dns
hosts: files dns
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END egrep 'net|hosts' /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==
[/code]
yum update
That resulted in a kernel panic similar to one that has been described here before:
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: Autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "UUID=XXX" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.32-358.6.2.el6.x86_64 #1
Call Trace:
[] ? panic+0xa7/0x16f
[] ? mount_block_root+0x1ea/0x29e
[]? bstat+0x2a0/0x970
[] ? mount_root+0x56/0x5a
[] ? prepare_namespace+0x170/0x1a9
[] ? kernel_init+0x2e8/0x2fe
[] ? child_rip+0xa/0x20
[] ? kernel_init+0x0/0x2fe
[] ? child_rip+0x0/0x20
I was able to boot into an older version of the kernel (2.6.2-220.23.1.el6.x86_64), though.
I attempted:
yum reinstall kernel-2.6.2-358.6.2.el6.x86_64
This command completed, but with a warning:
Non-fatal POSTTRANS scriptlet failure in rpm package kernel-2.6.32-358.6.2.el6.x86_64
Curiously, there is no initramfs-2.6.32-358.6.2.el6.x86_64 to go with the vmlinuz-2.6.32-358.6.2.el6.x86_64 file.
So I attempted to make one:
dracut --mdadmconf --verbose initramfs-2.6.32-358.6.2.el6.x86_64 2.6.32-358.6.2.el6.x86_64
This results in:
...
I: Installing /sbin/blockdev
I: Installing /usr/share/dracut/modules.d/90dmsquash-live/parse-dmsquash-live.sh
I: Installing /usr/share/dracut/modules.d/90dmsquash-live/dmsquash-liveiso-genrules.sh
I: Installing /usr/share/dracut/modules.d/90dmsquash-live/dmsquash-live-root
I: Installing /lib/udev/rules.d/60-cdrom_id.rules
I: Installing /etc/modprobe.d/dist-alsa.conf
I: Installing /etc/modprobe.d/blacklist.conf
I: Installing /etc/modprobe.d/dist.conf
I: Installing /etc/modprobe.d/anaconda.conf
I: Installing /etc/modprobe.d/dist-oss.conf
Segmentation fault (core dumped)
So I can't seem to make the initramfs for this kernel.
Any suggestions?
Mike
I've appended the output from getinfo below.
Information for general problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.23.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-6-4.el6.centos.10.x86_64
nux-dextop-release-0-2.el6.nux.noarch
elrepo-release-6-5.el6.elrepo.noarch
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.4 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 15922 15758 164 0 412 14109
-/+ buffers/cache: 1236 14686
Swap: 32767 0 32767
== END free -m ==
== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-36.el6.x86_64
rpm-build-4.8.0-32.el6.x86_64
rpm-libs-4.8.0-32.el6.x86_64
rpm-python-4.8.0-32.el6.x86_64
yum-3.2.29-40.el6.centos.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-14.el6.noarch
yum-plugin-security-1.1.30-14.el6.noarch
yum-utils-1.1.30-14.el6.noarch
== END rpm -qa yum\* rpm-\* python | sort ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Vault.repo
elrepo.repo
epel.repo
linuxtech.repo
mondorescue.repo
nux-dextop.repo
pb.repo
plex.repo
rpmforge.repo
squeezecenter.repo
== END ls /etc/yum.repos.d ==
== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==
== BEGIN yum repolist all ==
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: mirrors.advancedhosters.com
* elrepo: mirror.symnds.com
* extras: mirrors.advancedhosters.com
* nux-dextop: li.nux.ro
* updates: mirror.net.cen.ct.gov
repo id repo name status
C6.0-base CentOS-6.0 - Base disabled
C6.0-centosplus CentOS-6.0 - CentOSPlus disabled
C6.0-contrib CentOS-6.0 - Contrib disabled
C6.0-extras CentOS-6.0 - Extras disabled
C6.0-updates CentOS-6.0 - Updates disabled
C6.1-base CentOS-6.1 - Base disabled
C6.1-centosplus CentOS-6.1 - CentOSPlus disabled
C6.1-contrib CentOS-6.1 - Contrib disabled
C6.1-extras CentOS-6.1 - Extras disabled
C6.1-updates CentOS-6.1 - Updates disabled
C6.2-base CentOS-6.2 - Base disabled
C6.2-centosplus CentOS-6.2 - CentOSPlus disabled
C6.2-contrib CentOS-6.2 - Contrib disabled
C6.2-extras CentOS-6.2 - Extras disabled
C6.2-updates CentOS-6.2 - Updates disabled
C6.3-base CentOS-6.3 - Base disabled
C6.3-centosplus CentOS-6.3 - CentOSPlus disabled
C6.3-contrib CentOS-6.3 - Contrib disabled
C6.3-extras CentOS-6.3 - Extras disabled
C6.3-updates CentOS-6.3 - Updates disabled
PlexRepo PlexRepo enabled: 12
base CentOS-6 - Base enabled: 6,381
c6-media CentOS-6 - Media disabled
centosplus CentOS-6 - Plus disabled
contrib CentOS-6 - Contrib disabled
debug CentOS-6 - Debuginfo disabled
elrepo ELRepo.org Community Enterprise Linux Repo enabled: 269
elrepo-extras ELRepo.org Community Enterprise Linux Extr disabled
elrepo-kernel ELRepo.org Community Enterprise Linux Kern disabled
elrepo-testing ELRepo.org Community Enterprise Linux Test disabled
epel EPEL RPM Repository for Red Hat Enterprise disabled
extras CentOS-6 - Extras enabled: 12
linuxtech LinuxTECH disabled
mondorescue rhel 6 x86_64 - mondorescue Vanilla Packag enabled: 108
nux-dextop Nux.Ro RPMs for general desktop use enabled: 1,233
nux-dextop-testing Nux.Ro RPMs for general desktop use - test disabled
pb rhel 6 x86_64 - pb Vanilla Packages enabled: 108
rpmforge RPMforge RPM repository for Red Hat Enterp disabled
squeezecenter-release SqueezeCenter Release Repository enabled: 25
squeezecenter-testing SqueezeCenter Branch Repository disabled
squeezecenter-unstable SqueezeCenter Trunk Repository disabled
updates CentOS-6 - Updates enabled: 768
repolist: 8,916
== END yum repolist all ==
== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== BEGIN cat /etc/fstab ==
#
# /etc/fstab
# Created by anaconda on Thu Jun 28 11:49:14 2012
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=3ba7d302-9223-418b-9027-36ad86804b38 / ext4 defaults 1 1
UUID=3b3e5a79-63da-4d22-b4c6-4a28f7fb1dee /boot ext4 defaults 1 2
UUID=0df2acd9-5c03-49b8-b94f-767d502ea0de swap swap defaults 0 0
UUID=b701a5a3-0125-486d-8afc-c8397636ca02 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sdc /mnt/usb_backup_1 ext4 rw,auto,sync,rw,user 0 0
/dev/sdd3 /backups/local/system ext2 noauto 0 0
== END cat /etc/fstab ==
== BEGIN df -h ==
Filesystem Size Used Avail Use% Mounted on
/dev/md1 1.8T 481G 1.3T 28% /
tmpfs 7.8G 4.0K 7.8G 1% /dev/shm
/dev/md0 485M 68M 392M 15% /boot
/dev/sdc 917G 476G 396G 55% /mnt/usb_backup_1
== END df -h ==
== BEGIN fdisk -lu ==
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007829d
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sda2 1026048 34580479 16777216 82 Linux swap / Solaris
/dev/sda3 34580480 3907028991 1936224256 fd Linux raid autodetect
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00093fda
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 1026047 512000 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sdb2 1026048 34580479 16777216 82 Linux swap / Solaris
/dev/sdb3 34580480 3907028991 1936224256 fd Linux raid autodetect
Disk /dev/md1: 1982.7 GB, 1982692454400 bytes
2 heads, 4 sectors/track, 484055775 cylinders, total 3872446200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdd1 1 1953525167 976762583+ ee GPT
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md0: 524 MB, 524275712 bytes
2 heads, 4 sectors/track, 127997 cylinders, total 1023976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
== END fdisk -lu ==
== BEGIN parted -l ==
Model: ATA WDC WD2003FYYS-0 (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 525MB 524MB primary ext4 boot, raid
2 525MB 17.7GB 17.2GB primary linux-swap(v1)
3 17.7GB 2000GB 1983GB primary raid
Model: ATA WDC WD2003FYYS-0 (scsi)
Disk /dev/sdb: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 525MB 524MB primary ext4 boot, raid
2 525MB 17.7GB 17.2GB primary linux-swap(v1)
3 17.7GB 2000GB 1983GB primary raid
Model: Hitachi HDS721010CLA332 (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 1000GB 1000GB ext4
Model: Hitachi HDS721010CLA332 (scsi)
Disk /dev/sdd: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 68.2MB 67.1MB fat16 boot
2 68.2MB 135MB 67.1MB ext2
3 135MB 1000GB 1000GB ext2
Model: Unknown (unknown)
Disk /dev/md1: 1983GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 1983GB 1983GB ext4
Model: Unknown (unknown)
Disk /dev/md0: 524MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 524MB 524MB ext4
== END parted -l ==
== BEGIN blkid ==
/dev/sdb1: UUID="44a7a908-4801-9f68-6765-cc85a0baa81d" UUID_SUB="096ab955-99e9-4527-c634-3916b0940d9d" LABEL="localhost.localdomain:0" TYPE="linux_raid_member"
/dev/sdb2: UUID="b701a5a3-0125-486d-8afc-c8397636ca02" TYPE="swap"
/dev/sdb3: UUID="2739fa98-5b50-ea52-dd5b-96b075d2b0a1" UUID_SUB="3f6b5107-1640-5f52-ea8c-7bbac35848c4" LABEL="localhost.localdomain:1" TYPE="linux_raid_member"
/dev/sda1: UUID="44a7a908-4801-9f68-6765-cc85a0baa81d" UUID_SUB="a630574d-4b2a-fc28-3863-d1f070182c95" LABEL="localhost.localdomain:0" TYPE="linux_raid_member"
/dev/sda2: UUID="0df2acd9-5c03-49b8-b94f-767d502ea0de" TYPE="swap"
/dev/sda3: UUID="2739fa98-5b50-ea52-dd5b-96b075d2b0a1" UUID_SUB="a8713a9b-9466-5853-5bf8-04f15a906cb6" LABEL="localhost.localdomain:1" TYPE="linux_raid_member"
/dev/md1: UUID="3ba7d302-9223-418b-9027-36ad86804b38" TYPE="ext4"
/dev/md0: UUID="3b3e5a79-63da-4d22-b4c6-4a28f7fb1dee" TYPE="ext4"
/dev/sdd1: SEC_TYPE="msdos" UUID="6F7C-79E4" TYPE="vfat"
/dev/sdd2: UUID="15fc6a66-7d56-45f8-8dde-bcbf16f54989" TYPE="ext2"
/dev/sdd3: UUID="9a0e6a7c-656a-4074-8b05-90a053b2d49b" TYPE="ext2"
/dev/sdc: UUID="a5a5f9d9-f050-4311-b7a0-fc0ea8a3a077" TYPE="ext4"
== END blkid ==
== BEGIN cat /proc/mdstat ==
Personalities : [raid1]
md0 : active raid1 sdb1[1] sda1[0]
511988 blocks super 1.0 [2/2] [UU]
md1 : active raid1 sdb3[1] sda3[0]
1936223100 blocks super 1.1 [2/2] [UU]
bitmap: 8/15 pages [32KB], 65536KB chunk
unused devices: <none>
== END cat /proc/mdstat ==
== BEGIN pvs ==
== END pvs ==
== BEGIN vgs ==
No volume groups found
== END vgs ==
== BEGIN lvs ==
No volume groups found
== END lvs ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.23.1.el6.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-2.6.32-358.6.2.el6.x86_64
kernel-firmware-2.6.32-358.6.2.el6.noarch
kernel-headers-2.6.32-358.6.2.el6.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller [8086:0108] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:16.1 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #2 [8086:1c3b] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5)
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5)
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
06:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
Bus 002 Device 003: ID 0926:000a
Bus 002 Device 004: ID 0926:000a
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
kmod-hfsplus-0.0-2.el6.elrepo.x86_64
== END rpm -qa kmod\* kmdl\* ==
== BEGIN ifconfig -a ==
bond0 Link encap:Ethernet HWaddr 00:25:90:75:92:BC
inet addr:192.168.2.20 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fe75:92bc/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:52234 errors:0 dropped:0 overruns:0 frame:0
TX packets:56743 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32813060 (31.2 MiB) TX bytes:24899613 (23.7 MiB)
eth0 Link encap:Ethernet HWaddr 00:25:90:75:92:BC
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:10576 errors:0 dropped:0 overruns:0 frame:0
TX packets:47491 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1304190 (1.2 MiB) TX bytes:23347351 (22.2 MiB)
Interrupt:16 Memory:f7c00000-f7c20000
eth1 Link encap:Ethernet HWaddr 00:25:90:75:92:BC
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:41658 errors:0 dropped:0 overruns:0 frame:0
TX packets:9252 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:31508870 (30.0 MiB) TX bytes:1552262 (1.4 MiB)
Interrupt:17 Memory:f7b00000-f7b20000
eth2 Link encap:Ethernet HWaddr 00:25:90:75:92:BE
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18 Memory:f7a00000-f7a20000
eth3 Link encap:Ethernet HWaddr 00:25:90:75:92:BF
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19 Memory:f7900000-f7920000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5248 errors:0 dropped:0 overruns:0 frame:0
TX packets:5248 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2122110 (2.0 MiB) TX bytes:2122110 (2.0 MiB)
== END ifconfig -a ==
== BEGIN brctl show ==
bridge name bridge id STP enabled interfaces
== END brctl show ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 bond0
169.254.0.0 0.0.0.0 255.255.0.0 U 1006 0 0 bond0
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 bond0
== END route -n ==
== BEGIN sysctl -a | grep .rp_filter ==
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.lo.rp_filter = 1
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth1.rp_filter = 1
net.ipv4.conf.eth1.arp_filter = 0
net.ipv4.conf.eth2.rp_filter = 1
net.ipv4.conf.eth2.arp_filter = 0
net.ipv4.conf.eth3.rp_filter = 1
net.ipv4.conf.eth3.arp_filter = 0
net.ipv4.conf.bond0.rp_filter = 1
net.ipv4.conf.bond0.arp_filter = 0
== END sysctl -a | grep .rp_filter ==
== BEGIN ip rule show ==
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
== END ip rule show ==
== BEGIN ip route show ==
192.168.2.0/24 dev bond0 proto kernel scope link src 192.168.2.20
169.254.0.0/16 dev bond0 scope link metric 1006
default via 192.168.2.1 dev bond0
== END ip route show ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search michaelphelpsmd.com
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
nameserver 192.168.2.1
nameserver 8.8.8.8
== END cat /etc/resolv.conf ==
== BEGIN egrep 'net|hosts' /etc/nsswitch.conf ==
#hosts: db files nisplus nis dns
hosts: files dns
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END egrep 'net|hosts' /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==
[/code]