errors transfered by clonezilla?

[hoodcanaljim]

Trevor
I've now got two hard drives cloned and 233gb of backup data stored on a second computer so I feel safe with the data. I'll check the logs and then remount the original hard drive and check it. Possibly post the smartctl output from that drive.

Thanks
Jim

[hoodcanaljim]

This is for the original hard drive that started all this.

Here's part of the data from /var/log/messages

If you think its worth while I can post all of the smartd messages.

sudo grep refail /var/log/messages-2017*
/var/log/messages-20170319:Mar 15 09:35:33 tri smartd[2913]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 108 to 109
/var/log/messages-20170319:Mar 15 19:05:34 tri smartd[2913]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 109 to 110
/var/log/messages-20170319:Mar 16 04:05:33 tri smartd[2913]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 110 to 111
/var/log/messages-20170319:Mar 17 04:35:34 tri smartd[2913]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 111 to 112
/var/log/messages-20170326:Mar 21 19:05:34 tri smartd[2913]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 112 to 113
/var/log/messages-20170326:Mar 22 20:08:22 tri smartd[2934]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 113 to 114
/var/log/messages-20170326:Mar 23 12:18:51 tri smartd[2851]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 114 to 115
/var/log/messages-20170326:Mar 25 04:18:51 tri smartd[2851]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 115 to 116
/var/log/messages-20170326:Mar 25 13:18:51 tri smartd[2851]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 116 to 117
/var/log/messages-20170402:Mar 28 09:18:52 tri smartd[2851]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 117 to 118
/var/log/messages-20170402:Mar 28 16:43:17 tri smartd[2954]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 118 to 119
/var/log/messages-20170409:Apr 2 18:43:18 tri smartd[2954]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 119 to 120
/var/log/messages-20170409:Apr 6 04:43:18 tri smartd[2954]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 120 to 106
/var/log/messages-20170409:Apr 6 05:13:17 tri smartd[2954]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 106 to 111
/var/log/messages-20170409:Apr 6 16:13:18 tri smartd[2954]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 111 to 112
/var/log/messages-20170409:Apr 6 18:13:17 tri smartd[2954]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 112 to 113
/var/log/messages-20170409:Apr 8 04:33:55 tri smartd[2886]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 115 to 116

This is the smartd log
I normally keep an eye on the Current_Pending_Sector values as a sign of impending doom.

sudo smartctl -a /dev/sdb
smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-696.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: Z1E8GTVN
LU WWN Device Id: 5 000c50 0676b1a94
Firmware Version: CC27
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ACS-2 (unknown minor revision code: 0x001f)
Local Time is: Wed Apr 12 08:35:34 2017 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 218) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 136382216
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 174
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 68408969
9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22208
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 153
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 054 045 Old_age Always - 33 (Min/Max 20/33)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 112
193 Load_Cycle_Count 0x0032 074 074 000 Old_age Always - 52571
194 Temperature_Celsius 0x0022 033 046 000 Old_age Always - 33 (0 17 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 21599h+59m+49.896s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 8042345379
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4460507119

SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 22203 hours (925 days + 3 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 00 00 00 00 00 04 00:21:34.681 NOP [Abort queued commands]
b0 d4 00 81 4f c2 00 00 00:21:04.217 SMART EXECUTE OFF-LINE IMMEDIATE
b0 d0 01 00 4f c2 00 00 00:21:04.148 SMART READ DATA
ec 00 01 00 00 00 00 00 00:21:04.139 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:21:04.139 IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 22208 -
# 2 Short offline Completed without error 00% 22207 -
# 3 Short offline Completed without error 00% 22207 -
# 4 Short offline Completed without error 00% 22207 -
# 5 Extended offline Completed without error 00% 22207 -
# 6 Short offline Completed without error 00% 22203 -
# 7 Short captive Interrupted (host reset) 50% 22203 -
# 8 Short offline Completed without error 00% 22186 -
# 9 Short offline Completed without error 00% 22162 -
#10 Extended offline Completed without error 00% 22143 -
#11 Short offline Completed without error 00% 22138 -
#12 Short offline Completed without error 00% 22115 -
#13 Short offline Completed without error 00% 22091 -
#14 Short offline Completed without error 00% 22067 -
#15 Short offline Completed without error 00% 22043 -
#16 Short offline Completed without error 00% 22019 -
#17 Short offline Completed without error 00% 21995 -
#18 Extended offline Completed without error 00% 21975 -
#19 Short offline Completed without error 00% 21971 -
#20 Short offline Completed without error 00% 21947 -
#21 Short offline Completed without error 00% 21923 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Thanks
Jim

[hoodcanaljim]

Well.... after watching the drive for two days and reading the posting on google about the odd readings from SeaGate drives I feel I overreacted to the messages in the email from Smartd. I have gotten a lot of good experience with Clonezilla and know more then I did before about Smartd info so not a total loss.
Thanks for walking me out of the woods.

Jim

(Mark as Solved)