Can not start X-server

General support questions
Post Reply
datrav
Posts: 1
Joined: 2018/01/29 23:52:23

Can not start X-server

Post by datrav » 2018/01/30 00:07:00

Good night. I do not know how to find a solution. Can't start X-server with nvidia drivers. System - CentOS 6.9. Nvidia GeForce 210

/etc/X11/xorg.conf:

Code: Select all

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 340.102  (buildmeister@swio-display-x64-rhel04-13)  Mon Jan 16 13:04:47 PST 2017

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    Screen      1  "Screen0 (1)" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 210"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device0 (1)"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 210"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0 (1)"
    Device         "Device0 (1)"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
/var/log/Xorg.0.log

Code: Select all

[   107.662] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[   107.662] _XSERVTransOpen: transport open failed for inet6/pc01.localdomain:0
[   107.662] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[   107.903] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[   107.904] X Protocol Version 11, Revision 0
[   107.904] Build Operating System: x86_64_01 3.10.0-693.2.2.el7.x86_64 
[   107.904] Current Operating System: Linux pc01.localdomain 2.6.32-696.20.1.el6.i686 #1 SMP Fri Jan 26 18:13:32 UTC 2018 i686
[   107.904] Kernel command line: ro root=/dev/mapper/vg_pc01-root LANG=ru_RU.UTF-8 rd_NO_LUKS rd_LVM_LV=vg_pc01/swap rd_NO_MD rd_LVM_LV=vg_pc01/root crashkernel=129M@0M  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet irqpool ipv6.disable=1 nouveau.modeset=0 rdblacklist=nouveau
[   107.905] Build Date: 26 January 2018  07:43:48AM
[   107.905] Build ID: xorg-x11-server 1.17.4-16.el6.centos.1 
[   107.905] Current version of pixman: 0.32.8
[   107.906] 	Before reporting problems, check http://wiki.centos.org/Documentation
	to make sure that you have the latest version.
[   107.906] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   107.908] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 30 03:02:57 2018
[   107.918] (==) Using config file: "/etc/X11/xorg.conf"
[   107.919] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   107.935] (==) ServerLayout "Layout0"
[   107.935] (**) |-->Screen "Screen0" (0)
[   107.935] (**) |   |-->Monitor "Monitor0"
[   107.935] (**) |   |-->Device "Device0"
[   107.935] (**) |-->Screen "Screen0 (1)" (1)
[   107.935] (**) |   |-->Monitor "Monitor0"
[   107.935] (**) |   |-->Device "Device0 (1)"
[   107.935] (**) |-->Input Device "Keyboard0"
[   107.935] (**) |-->Input Device "Mouse0"
[   107.935] (==) Automatically adding devices
[   107.935] (==) Automatically enabling devices
[   107.935] (==) Not automatically adding GPU devices
[   107.936] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   107.936] (**) FontPath set to:
	/usr/share/fonts/default/Type1,
	catalogue:/etc/X11/fontpath.d,
	built-ins
[   107.936] (==) ModulePath set to "/usr/lib/xorg/modules"
[   107.936] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   107.937] (WW) Disabling Keyboard0
[   107.937] (WW) Disabling Mouse0
[   107.937] (II) Loader magic: 0x559020
[   107.937] (II) Module ABI versions:
[   107.937] 	X.Org ANSI C Emulation: 0.4
[   107.937] 	X.Org Video Driver: 19.0
[   107.937] 	X.Org XInput driver : 21.0
[   107.937] 	X.Org Server Extension : 9.0
[   107.945] (--) PCI:*(0:1:0:0) 10de:0a65:19da:7214 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   107.945] (II) LoadModule: "glx"
[   107.976] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   108.062] (II) Module glx: vendor="X.Org Foundation"
[   108.062] 	compiled for 1.17.4, module version = 1.0.0
[   108.062] 	ABI class: X.Org Server Extension, version 9.0
[   108.062] (==) AIGLX enabled
[   108.062] (II) LoadModule: "nvidia"
[   108.082] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   108.142] (II) Module nvidia: vendor="NVIDIA Corporation"
[   108.142] 	compiled for 4.0.2, module version = 1.0.0
[   108.142] 	Module class: X.Org Video Driver
[   108.158] (II) NVIDIA dlloader X Driver  340.102  Mon Jan 16 11:59:14 PST 2017
[   108.158] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   108.159] (--) using VT number 7

[   108.174] (II) Loading sub module "fb"
[   108.174] (II) LoadModule: "fb"
[   108.174] (II) Loading /usr/lib/xorg/modules/libfb.so
[   108.181] (II) Module fb: vendor="X.Org Foundation"
[   108.181] 	compiled for 1.17.4, module version = 1.0.0
[   108.181] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   108.181] (WW) Unresolved symbol: fbGetGCPrivateKey
[   108.181] (II) Loading sub module "wfb"
[   108.181] (II) LoadModule: "wfb"
[   108.181] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   108.189] (II) Module wfb: vendor="X.Org Foundation"
[   108.189] 	compiled for 1.17.4, module version = 1.0.0
[   108.189] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   108.189] (II) Loading sub module "ramdac"
[   108.189] (II) LoadModule: "ramdac"
[   108.189] (II) Module "ramdac" already built-in
[   108.200] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   108.200] (==) NVIDIA(0): RGB weight 888
[   108.200] (==) NVIDIA(0): Default visual is TrueColor
[   108.200] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   108.200] (**) NVIDIA(0): Enabling 2D acceleration
[   108.200] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[   108.200] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[   108.200] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[   108.200] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[   108.200] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[   108.993] (II) NVIDIA(0): Display (Acer K222HQL (CRT-1)) does not support NVIDIA 3D
[   108.993] (II) NVIDIA(0):     Vision stereo.
[   109.054] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[   109.054] (--) NVIDIA(0): Memory: 1048576 kBytes
[   109.054] (--) NVIDIA(0): VideoBIOS: 70.18.94.00.00
[   109.055] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   109.056] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[   109.056] (--) NVIDIA(0):     CRT-0
[   109.056] (--) NVIDIA(0):     Acer K222HQL (CRT-1) (boot, connected)
[   109.056] (--) NVIDIA(0):     DFP-0
[   109.056] (--) NVIDIA(0):     DFP-1
[   109.056] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   109.056] (--) NVIDIA(GPU-0): Acer K222HQL (CRT-1): 400.0 MHz maximum pixel clock
[   109.056] (--) NVIDIA(0): DFP-0: Internal TMDS
[   109.056] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   109.056] (--) NVIDIA(0): DFP-1: Internal TMDS
[   109.056] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   109.056] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   109.056] (**) NVIDIA(0):     device Acer K222HQL (CRT-1) (Using EDID frequencies has
[   109.056] (**) NVIDIA(0):     been enabled on all display devices.)
[   109.058] (==) NVIDIA(0): 
[   109.058] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   109.058] (==) NVIDIA(0):     will be used as the requested mode.
[   109.058] (==) NVIDIA(0): 
[   109.058] (II) NVIDIA(0): Validated MetaModes:
[   109.058] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[   109.058] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[   109.085] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[   109.085] (--) NVIDIA(0):     option
[   109.085] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[   109.085] (==) NVIDIA(1): RGB weight 888
[   109.085] (==) NVIDIA(1): Default visual is TrueColor
[   109.085] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[   109.085] (II) NVIDIA(1): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[   109.085] (--) NVIDIA(1): Memory: 1048576 kBytes
[   109.086] (--) NVIDIA(1): VideoBIOS: 70.18.94.00.00
[   109.086] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[   109.086] (--) NVIDIA(1): Valid display device(s) on GeForce 210 at PCI:1:0:0
[   109.086] (--) NVIDIA(1):     CRT-0
[   109.086] (--) NVIDIA(1):     Acer K222HQL (CRT-1) (boot, connected)
[   109.087] (--) NVIDIA(1):     DFP-0
[   109.087] (--) NVIDIA(1):     DFP-1
[   109.087] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   109.087] (--) NVIDIA(GPU-0): Acer K222HQL (CRT-1): 400.0 MHz maximum pixel clock
[   109.087] (--) NVIDIA(1): DFP-0: Internal TMDS
[   109.087] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   109.087] (--) NVIDIA(1): DFP-1: Internal TMDS
[   109.087] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   109.087] (EE) NVIDIA(1): Failed to assign any connected display devices to X screen 1. 
[   109.087] (EE) NVIDIA(1):     Set AllowEmptyInitialConfiguration if you want the server
[   109.087] (EE) NVIDIA(1):     to start anyway
[   109.088] (EE) NVIDIA(1): Failing initialization of X screen 1
[   109.088] (II) UnloadModule: "nvidia"
[   109.088] (II) UnloadSubModule: "wfb"
[   109.088] (II) UnloadSubModule: "fb"
[   109.088] (--) Depth 24 pixmap format is 32 bpp
[   109.088] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[   109.095] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[   109.158] (==) NVIDIA(0): Disabling shared memory pixmaps
[   109.158] (==) NVIDIA(0): Backing store enabled
[   109.159] (==) NVIDIA(0): Silken mouse enabled
[   109.176] (**) NVIDIA(0): DPMS enabled
[   109.176] (II) Loading sub module "dri2"
[   109.176] (II) LoadModule: "dri2"
[   109.176] (II) Module "dri2" already built-in
[   109.180] (II) NVIDIA(0): [DRI2] Setup complete
[   109.180] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   109.181] (--) RandR disabled
[   109.185] (II) SELinux: Disabled by boolean
[   109.185] (II) AIGLX: Screen 0 is not DRI2 capable
[   109.185] (EE) AIGLX: reverting to software rendering
[   109.684] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   109.685] (II) AIGLX: Loaded and initialized swrast
[   109.685] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   110.041] (II) config/hal: Adding input device Logitech USB Optical Mouse
[   110.041] (II) LoadModule: "evdev"
[   110.041] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   110.074] (II) Module evdev: vendor="X.Org Foundation"
[   110.074] 	compiled for 1.17.4, module version = 2.9.2
[   110.074] 	Module class: X.Org XInput Driver
[   110.074] 	ABI class: X.Org XInput driver, version 21.0
[   110.074] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[   110.074] (**) Logitech USB Optical Mouse: always reports core events
[   110.074] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event4"
[   110.082] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[   110.082] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[   110.082] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[   110.082] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[   110.082] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[   110.082] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[   110.082] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[   110.082] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   110.082] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   110.082] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_46d_c05a_noserial_if0_logicaldev_input"
[   110.082] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 6)
[   110.082] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[   110.082] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[   110.082] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[   110.082] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   110.082] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   110.094] (II) config/hal: Adding input device HDA Intel PCH Front Headphone
[   110.094] (II) Using input driver 'evdev' for 'HDA Intel PCH Front Headphone'
[   110.094] (**) HDA Intel PCH Front Headphone: always reports core events
[   110.094] (**) evdev: HDA Intel PCH Front Headphone: Device: "/dev/input/event11"
[   110.098] (--) evdev: HDA Intel PCH Front Headphone: Vendor 0 Product 0
[   110.098] (WW) evdev: HDA Intel PCH Front Headphone: Don't know how to use device
[   110.106] (EE) PreInit returned 8 for "HDA Intel PCH Front Headphone"
[   110.106] (II) UnloadModule: "evdev"
[   110.106] (EE) config/hal: NewInputDeviceRequest failed (8)
[   110.120] (II) config/hal: Adding input device Logitech USB Keyboard
[   110.120] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   110.120] (**) Logitech USB Keyboard: always reports core events
[   110.120] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event6"
[   110.124] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   110.124] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   110.124] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   110.124] (--) evdev: Logitech USB Keyboard: Found keys
[   110.124] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   110.124] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   110.124] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   110.124] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_46d_c31c_noserial_if1_logicaldev_input"
[   110.124] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 7)
[   110.124] (**) Option "xkb_rules" "evdev"
[   110.124] (**) Option "xkb_model" "pc105+inet"
[   110.124] (**) Option "xkb_layout" "us"
[   110.124] (WW) Option "xkb_variant" requires a string value
[   110.124] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[   110.158] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   110.158] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   110.158] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   110.158] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   110.158] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   110.161] (II) config/hal: Adding input device Logitech USB Keyboard
[   110.161] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   110.161] (**) Logitech USB Keyboard: always reports core events
[   110.161] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event5"
[   110.170] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   110.171] (--) evdev: Logitech USB Keyboard: Found keys
[   110.171] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   110.171] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_46d_c31c_noserial_if0_logicaldev_input"
[   110.171] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)
[   110.171] (**) Option "xkb_rules" "evdev"
[   110.171] (**) Option "xkb_model" "pc105+inet"
[   110.171] (**) Option "xkb_layout" "us"
[   110.171] (WW) Option "xkb_variant" requires a string value
[   110.171] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[   110.174] (II) config/hal: Adding input device Sleep Button
[   110.174] (II) Using input driver 'evdev' for 'Sleep Button'
[   110.174] (**) Sleep Button: always reports core events
[   110.174] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   110.183] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   110.183] (--) evdev: Sleep Button: Found keys
[   110.183] (II) evdev: Sleep Button: Configuring as keyboard
[   110.183] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_1"
[   110.183] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   110.183] (**) Option "xkb_rules" "evdev"
[   110.183] (**) Option "xkb_model" "pc105+inet"
[   110.183] (**) Option "xkb_layout" "us"
[   110.183] (WW) Option "xkb_variant" requires a string value
[   110.183] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[   110.194] (II) config/hal: Adding input device Power Button
[   110.194] (II) Using input driver 'evdev' for 'Power Button'
[   110.194] (**) Power Button: always reports core events
[   110.194] (**) evdev: Power Button: Device: "/dev/input/event0"
[   110.198] (--) evdev: Power Button: Vendor 0 Product 0x1
[   110.198] (--) evdev: Power Button: Found keys
[   110.198] (II) evdev: Power Button: Configuring as keyboard
[   110.198] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_0"
[   110.198] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[   110.198] (**) Option "xkb_rules" "evdev"
[   110.198] (**) Option "xkb_model" "pc105+inet"
[   110.198] (**) Option "xkb_layout" "us"
[   110.198] (WW) Option "xkb_variant" requires a string value
[   110.198] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[   110.209] (II) config/hal: Adding input device Power Button
[   110.209] (II) Using input driver 'evdev' for 'Power Button'
[   110.209] (**) Power Button: always reports core events
[   110.209] (**) evdev: Power Button: Device: "/dev/input/event2"
[   110.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[   110.217] (--) evdev: Power Button: Found keys
[   110.217] (II) evdev: Power Button: Configuring as keyboard
[   110.217] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input"
[   110.217] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 11)
[   110.217] (**) Option "xkb_rules" "evdev"
[   110.217] (**) Option "xkb_model" "pc105+inet"
[   110.217] (**) Option "xkb_layout" "us"
[   110.217] (WW) Option "xkb_variant" requires a string value
[   110.217] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[   110.226] (II) config/hal: Adding input device Macintosh mouse button emulation
[   110.226] (II) Using input driver 'evdev' for 'Macintosh mouse button emulation'
[   110.226] (**) Macintosh mouse button emulation: always reports core events
[   110.226] (**) evdev: Macintosh mouse button emulation: Device: "/dev/input/event3"
[   110.232] (--) evdev: Macintosh mouse button emulation: Vendor 0x1 Product 0x1
[   110.232] (--) evdev: Macintosh mouse button emulation: Found 3 mouse buttons
[   110.232] (--) evdev: Macintosh mouse button emulation: Found relative axes
[   110.232] (--) evdev: Macintosh mouse button emulation: Found x and y relative axes
[   110.232] (II) evdev: Macintosh mouse button emulation: Configuring as mouse
[   110.232] (**) evdev: Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[   110.232] (**) evdev: Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   110.232] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/computer_logicaldev_input_2"
[   110.232] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE, id 12)
[   110.232] (II) evdev: Macintosh mouse button emulation: initialized for relative axes.
[   110.232] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[   110.232] (**) Macintosh mouse button emulation: (accel) acceleration profile 0
[   110.232] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[   110.232] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4
[   110.244] (II) config/hal: Adding input device HDA NVidia HDMI/DP,pcm=9
[   110.244] (II) Using input driver 'evdev' for 'HDA NVidia HDMI/DP,pcm=9'
[   110.244] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events
[   110.244] (**) evdev: HDA NVidia HDMI/DP,pcm=9: Device: "/dev/input/event15"
[   110.248] (--) evdev: HDA NVidia HDMI/DP,pcm=9: Vendor 0 Product 0
[   110.248] (WW) evdev: HDA NVidia HDMI/DP,pcm=9: Don't know how to use device
[   110.264] (EE) PreInit returned 8 for "HDA NVidia HDMI/DP,pcm=9"
[   110.264] (II) UnloadModule: "evdev"
[   110.264] (EE) config/hal: NewInputDeviceRequest failed (8)
[   110.275] (II) config/hal: Adding input device HDA NVidia HDMI/DP,pcm=8
[   110.275] (II) Using input driver 'evdev' for 'HDA NVidia HDMI/DP,pcm=8'
[   110.275] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events
[   110.275] (**) evdev: HDA NVidia HDMI/DP,pcm=8: Device: "/dev/input/event14"
[   110.280] (--) evdev: HDA NVidia HDMI/DP,pcm=8: Vendor 0 Product 0
[   110.280] (WW) evdev: HDA NVidia HDMI/DP,pcm=8: Don't know how to use device
[   110.296] (EE) PreInit returned 8 for "HDA NVidia HDMI/DP,pcm=8"
[   110.296] (II) UnloadModule: "evdev"
[   110.296] (EE) config/hal: NewInputDeviceRequest failed (8)
[   110.309] (II) config/hal: Adding input device HDA NVidia HDMI/DP,pcm=7
[   110.309] (II) Using input driver 'evdev' for 'HDA NVidia HDMI/DP,pcm=7'
[   110.309] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events
[   110.309] (**) evdev: HDA NVidia HDMI/DP,pcm=7: Device: "/dev/input/event13"
[   110.315] (--) evdev: HDA NVidia HDMI/DP,pcm=7: Vendor 0 Product 0
[   110.315] (WW) evdev: HDA NVidia HDMI/DP,pcm=7: Don't know how to use device
[   110.331] (EE) PreInit returned 8 for "HDA NVidia HDMI/DP,pcm=7"
[   110.331] (II) UnloadModule: "evdev"
[   110.331] (EE) config/hal: NewInputDeviceRequest failed (8)
[   110.342] (II) config/hal: Adding input device HDA NVidia HDMI/DP,pcm=3
[   110.342] (II) Using input driver 'evdev' for 'HDA NVidia HDMI/DP,pcm=3'
[   110.342] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events
[   110.342] (**) evdev: HDA NVidia HDMI/DP,pcm=3: Device: "/dev/input/event12"
[   110.347] (--) evdev: HDA NVidia HDMI/DP,pcm=3: Vendor 0 Product 0
[   110.347] (WW) evdev: HDA NVidia HDMI/DP,pcm=3: Don't know how to use device
[   110.363] (EE) PreInit returned 8 for "HDA NVidia HDMI/DP,pcm=3"
[   110.363] (II) UnloadModule: "evdev"
[   110.363] (EE) config/hal: NewInputDeviceRequest failed (8)
[   111.819] (II) NVIDIA(GPU-0): Display (Acer K222HQL (CRT-1)) does not support NVIDIA 3D
[   111.819] (II) NVIDIA(GPU-0):     Vision stereo.
[   111.852] (II) NVIDIA(GPU-0): Display (Acer K222HQL (CRT-1)) does not support NVIDIA 3D
[   111.852] (II) NVIDIA(GPU-0):     Vision stereo.
[   111.912] (II) NVIDIA(GPU-0): Display (Acer K222HQL (CRT-1)) does not support NVIDIA 3D
[   111.912] (II) NVIDIA(GPU-0):     Vision stereo.
[   114.431] (II) NVIDIA(GPU-0): Display (Acer K222HQL (CRT-1)) does not support NVIDIA 3D
[   114.431] (II) NVIDIA(GPU-0):     Vision stereo.
[   160.997] (EE) NVIDIA(GPU-0): Failed to initialize DMA.
[   160.997] (EE)  *** Aborting ***
[   160.997] (EE) NVIDIA(0): Error recovery failed.
[   160.997] (EE) NVIDIA(0):  *** Aborting ***
[   160.999] (EE) 
Fatal server error:
[   160.999] (EE) Failed to recover from error!
[   160.999] (EE) 
[   160.999] (EE) 
Please consult the CentOS support 
	 at http://wiki.centos.org/Documentation
 for help. 
[   160.999] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   160.999] (EE) 
[   164.001] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0xdffe2000, 0x00000014)
[   171.001] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0xdffe2000, 0x00000014)
[   186.005] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000014, 0x00000024)
[   193.005] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000014, 0x00000024)
[   196.064] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00000014, 0x00000034)
[   203.064] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x00000014, 0x00000034)
[   206.065] (WW) NVIDIA(0): WAIT (2, 4, 0x8000, 0x00000014, 0x00000094)
[   213.065] (WW) NVIDIA(0): WAIT (1, 4, 0x8000, 0x00000014, 0x00000094)
[   213.065] (EE) 
[   213.065] (EE) Backtrace:
[   213.065] (EE) 0: /usr/bin/X (xorg_backtrace+0x59) [0x4db1b9]
[   213.065] (EE) 1: /usr/bin/X (0x311000+0x1ce856) [0x4df856]
[   213.065] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xdb640c]
[   213.065] (EE) 3: /lib/libc.so.6 (0xa18000+0x1376b0) [0xb4f6b0]
[   213.065] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0xb6c9f000+0xb7a29) [0xb6d56a29]
[   213.065] (EE) 
[   213.065] (EE) Segmentation fault at address 0xb6c6d000
[   213.065] (EE) 
FatalError re-entered, aborting
[   213.065] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   213.065] (EE) 

User avatar
toracat
Forum Moderator
Posts: 7307
Joined: 2006/09/03 16:37:24
Location: California, US
Contact:

Re: Can not start X-server

Post by toracat » 2018/01/30 07:57:22

Looks as if ModulePath is not set. How did you install the Nvidia driver?
CentOS Forum FAQ

User avatar
TrevorH
Forum Moderator
Posts: 24075
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Can not start X-server

Post by TrevorH » 2018/01/30 13:38:51

It also looks like ipv6 is disabled and I'm not sure if X is one of those things that refuses to run without it.
CentOS 5 died in March 2017 - migrate NOW!
Full time Geek, part time moderator. Use the FAQ Luke

Post Reply