I have issue after install CentOS 6.10

General support questions
Post Reply
hnomkeng
Posts: 2
Joined: 2018/10/20 03:21:28

I have issue after install CentOS 6.10

Post by hnomkeng » 2018/10/20 03:22:59

PCI: Warning: Cannot find a gap in the 32bit address range
PCI: Unassigned devices with 32bit resource registers may break!
PCI: Fatal: No config space access function found
Welcome to CentOS
Starting udev: [ OK ]
Setting hostname localhost.localdomain: [ OK ]
Setting up Logical Volume Management: 3 logical volume(s) in volume group "VolGroup" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/VolGroup-lv_root
/dev/mapper/VolGroup-lv_root: clean, 18696/3276800 files, 412952/13107200 blocks
[/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/xvda1
/dev/xvda1: clean, 38/128016 files, 52369/512000 blocks
[/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/VolGroup-lv_home
/dev/mapper/VolGroup-lv_home: clean, 11/22265856 files, 1447251/89055232 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
Starting monitoring for VG VolGroup: 3 logical volume(s) in volume group "VolGroup" monitored
PCI: Warning: Cannot find a gap in the 32bit address range
PCI: Unassigned devices with 32bit resource registers may break!
PCI: Fatal: No config space access function found
Welcome to CentOS
Starting udev: [ OK ]
Setting hostname localhost.localdomain: [ OK ]
Setting up Logical Volume Management: 3 logical volume(s) in volume group "VolGroup" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/VolGroup-lv_root
/dev/mapper/VolGroup-lv_root: clean, 18696/3276800 files, 412952/13107200 blocks
[/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/xvda1
/dev/xvda1: clean, 38/128016 files, 52369/512000 blocks
[/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/VolGroup-lv_home
/dev/mapper/VolGroup-lv_home: clean, 11/22265856 files, 1447251/89055232 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
Starting monitoring for VG VolGroup: 3 logical volume(s) in volume group "VolGroup" monitored

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: I have issue after install CentOS 6.10

Post by TrevorH » 2018/10/20 10:24:55

Are you doing PCI passthrough? If not then you can most likely ignore those messages. See https://discussions.citrix.com/topic/32 ... f-ram-4gb/
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

Post Reply