[CENTOS6] usb 3 controller NEC not use

[lorangina]

hi all
I cant see and mount my usb drive via nec USB 3 controller. Below my version and outputs to help me guys. Thanks

release:
Linux bambitos 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux

LSB Version: :core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID: CentOS
Description: CentOS Linux release 6.0 (Final)
Release: 6.0
Codename: Final

[root@bambitos log]# lspci | grep -i usb
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)

root@bambitos log]# lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 003 Device 002: ID 04b3:3108 IBM Corp. 800dpi Optical Mouse w/ Scroll Point
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[root@bambitos log]# mount|grep -i udisk


what-s going on? :-(
thansk for your help

[pschaff]

Welcome to the CentOS fora. Please see the recommended reading for new users linked in my signature. User Comments is the wrong place for your post. Moving it to CentOS 6 General Support.

Please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=25128&forum=47]provide more information about your system[/url] by running "./getinfo.sh driver" and showing us the output file.

[lorangina]

Thank Fil for your answer
Here you are.


Information for driver problems.
[code]
== BEGIN uname -rmi ==
2.6.32-71.29.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==

== BEGIN rpm -qa \*-release\* ==
epel-release-6-5.noarch
centos-release-6-0.el6.centos.5.x86_64
rpmforge-release-0.5.2-2.el6.rf.x86_64
== END rpm -qa \*-release\* ==

== BEGIN cat /etc/redhat-release ==
CentOS Linux release 6.0 (Final)
== END cat /etc/redhat-release ==

== BEGIN getenforce ==
Enforcing
== END getenforce ==

== BEGIN free -m ==
total used free shared buffers cached
Mem: 7870 913 6957 0 30 414
-/+ buffers/cache: 468 7402
Swap: 4095 0 4095
== END free -m ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-71.29.1.el6.x86_64
kernel-2.6.32-71.el6.x86_64
kernel-firmware-2.6.32-71.29.1.el6.noarch
== END rpm -qa kernel\* | sort ==

== BEGIN lspci ==
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller

...back 1 page
Information for driver problems.
[code]
== BEGIN uname -rmi ==
2.6.32-71.29.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==

== BEGIN rpm -qa \*-release\* ==
epel-release-6-5.noarch
centos-release-6-0.el6.centos.5.x86_64
rpmforge-release-0.5.2-2.el6.rf.x86_64
== END rpm -qa \*-release\* ==

== BEGIN cat /etc/redhat-release ==
CentOS Linux release 6.0 (Final)
== END cat /etc/redhat-release ==

== BEGIN getenforce ==
Enforcing
== END getenforce ==

== BEGIN free -m ==
total used free shared buffers cached
Mem: 7870 913 6957 0 30 414
-/+ buffers/cache: 468 7402
Swap: 4095 0 4095
== END free -m ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-71.29.1.el6.x86_64
kernel-2.6.32-71.el6.x86_64
kernel-firmware-2.6.32-71.29.1.el6.noarch
== END rpm -qa kernel\* | sort ==

== BEGIN lspci ==
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4550]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
== END lspci ==

== BEGIN lspci -n ==
00:00.0 0600: 1022:9600
00:02.0 0604: 1022:9603
00:04.0 0604: 1022:9604
00:0a.0 0604: 1022:9609
00:11.0 0106: 1002:4391
00:12.0 0c03: 1002:4397
00:12.1 0c03: 1002:4398
00:12.2 0c03: 1002:4396
00:13.0 0c03: 1002:4397
00:13.1 0c03: 1002:4398
00:13.2 0c03: 1002:4396
00:14.0 0c05: 1002:4385 (rev 3a)
00:14.1 0101: 1002:439c
00:14.2 0403: 1002:4383
00:14.3 0601: 1002:439d
00:14.4 0604: 1002:4384
00:14.5 0c03: 1002:4399
00:18.0 0600: 1022:1200
00:18.1 0600: 1022:1201
00:18.2 0600: 1022:1202
00:18.3 0600: 1022:1203
00:18.4 0600: 1022:1204
01:00.0 0300: 1002:9540
01:00.1 0403: 1002:aa38
02:00.0 0c03: 1033:0194 (rev 03)
03:00.0 0200: 10ec:8168 (rev 02)
04:0e.0 0c00: 104c:8024
== END lspci -n ==

== BEGIN lsusb ==
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 003 Device 002: ID 04b3:3108 IBM Corp. 800dpi Optical Mouse w/ Scroll Point
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
== END lsusb ==
[/code]

[pschaff]

[quote]
lorangina wrote:
...
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
...
02:00.0 0c03: 1033:0194 (rev 03)
...[/quote]
Searching on the Vendor:DeviceID fingerprint[code]$ grep -i 1033 /lib/modules/*/modules.alias | grep -i 0194
$ [/code]
No driver found in the CentOS-6 kernel. :-(

From [url=https://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&topic_id=28472&forum=39]this thread[/url] it appears there is an experimental driver available but it is not in current kernels. It does appear to work on [url=http://forums.opensuse.org/english/get-technical-help-here/64-bit/451543-usb-3-0-adapters-3.html]openSUSE[/url].

It might be made available in CentOSplus kernels - don't have one installed to check right now. It is also possible that a new [url=http://elrepo.org/bugs/view.php?id=153]EL6 kernel-ml from ELRepo[/url] will address the issue if/when it becomes available. You could also file a RFE at [url=http://elrepo.org/bugs/main_page.php]ELRepo[/url] to see if a kmod driver can be provided for EL6. If you do, please reference this thread.

[lorangina]

Many thanks Phil for your help, I don't know what Ill do. Wait or install Fedora.
bye

[pschaff]

You are not alone. Have just been reading EL6 USB 3 posts on the [url=http://listserv.fnal.gov/archives/scientific-linux-users.html]SL mailing list[/url].

[kbocek]

The driver for this NEC USB card is [b]xhci_hcd[/b]. The issue I'm having is that the driver does not automatically load and the hard drive I'm trying to use with it will disappear after five to ten minutes. I've got a [url=https://www.centos.org/modules/newbb/viewtopic.php?post_id=137807&topic_id=32237&forum=57]question[/url] open over in the hardware forum.

Kirk Bocek
[Moderator edit: Add link.]