it happens with or without the -e ssh option ... for example:
Code: Select all
rsync -zpaAPve ssh root@192.168.137.2:/etc/ /mirror/etc/
Code: Select all
[root@3or4G bin]# getetc
receiving incremental file list
./
adjtime
44 100% 42.97kB/s 0:00:00 (xfer#1, to-check=1457/1464)
mtab
287 100% 280.27kB/s 0:00:00 (xfer#2, to-check=1402/1464)
webmin/system-status/
webmin/system-status/info
26657 100% 137.74kB/s 0:00:00 (xfer#3, to-check=73/1922)
webmin/system-status/history/
webmin/system-status/history/bin
99907 100% 424.20kB/s 0:00:00 (xfer#4, to-check=71/1922)
webmin/system-status/history/bout
101315 100% 428.31kB/s 0:00:00 (xfer#5, to-check=70/1922)
webmin/system-status/history/cpuidle
113745 100% 474.70kB/s 0:00:00 (xfer#6, to-check=69/1922)
webmin/system-status/history/cpuio
99740 100% 412.72kB/s 0:00:00 (xfer#7, to-check=68/1922)
webmin/system-status/history/cpukernel
99753 100% 364.85kB/s 0:00:00 (xfer#8, to-check=67/1922)
webmin/system-status/history/cpuuser
100028 100% 363.14kB/s 0:00:00 (xfer#9, to-check=66/1922)
webmin/system-status/history/diskused
175248 100% 631.52kB/s 0:00:00 (xfer#10, to-check=65/1922)
webmin/system-status/history/load
122720 100% 437.39kB/s 0:00:00 (xfer#11, to-check=64/1922)
webmin/system-status/history/load15
122720 100% 373.35kB/s 0:00:00 (xfer#12, to-check=63/1922)
webmin/system-status/history/load5
122720 100% 371.03kB/s 0:00:00 (xfer#13, to-check=62/1922)
webmin/system-status/history/maxes
101 100% 0.30kB/s 0:00:00 (xfer#14, to-check=61/1922)
webmin/system-status/history/memused
159607 100% 478.12kB/s 0:00:00 (xfer#15, to-check=60/1922)
webmin/system-status/history/netcounts
95 100% 0.28kB/s 0:00:00 (xfer#16, to-check=59/1922)
webmin/system-status/history/procs
115050 100% 299.61kB/s 0:00:00 (xfer#17, to-check=58/1922)
webmin/system-status/history/rx
197199 100% 510.81kB/s 0:00:00 (xfer#18, to-check=57/1922)
webmin/system-status/history/swapused
99701 100% 256.22kB/s 0:00:00 (xfer#19, to-check=56/1922)
webmin/system-status/history/tx
154714 100% 383.47kB/s 0:00:00 (xfer#20, to-check=55/1922)
sent 17151 bytes received 54419 bytes 47713.33 bytes/sec
total size is 30184523 speedup is 421.75
[root@3or4G bin]# getetc
receiving incremental file list
sent 314 bytes received 50926 bytes 34160.00 bytes/sec
total size is 30184523 speedup is 589.08
[root@3or4G bin]#
[root@3or4G bin]# getetc
receiving incremental file list
sent 314 bytes received 50926 bytes 34160.00 bytes/sec
total size is 30184523 speedup is 589.08
[root@3or4G bin]# getetc
receiving incremental file list
sent 314 bytes received 50926 bytes 102480.00 bytes/sec
total size is 30184523 speedup is 589.08
[root@3or4G bin]# getetc
ssh: connect to host 192.168.137.2 port 22: Connection timed out
rsync: connection unexpectedly closed (0 bytes received so far) [receiver]
rsync error: unexplained error (code 255) at io.c(600) [receiver=3.0.6]