On a somewhat related note, I've set my power management options to ask me what to do (shutdown, suspend, hibernate, etc...) when I press the power button but that doesn't work at all. Nothing happens at all when I press the power button unless I hold it down for several seconds in which case the computer powers down.
Similarly, the options to Hibernate and Suspend remain grayed out on my XFCE menu bar. As such, the only way I can trigger the hiberate and suspend sequences is by the command line (i.e. 'pm_suspend', and 'pm_hibernate').
Other than the fact that I can only initiate a hibernate from the pm_hibernate command, the hibernate behavior itself seems to work fine, including the resume from hibernate.
I cleared the dmesg ring before attempting a suspend and then looked at it again after rebooting from the failure (i.e. failed resume, forced power down, then power back up). I noticed an error in the dmesg shown here. I'm guessing that this occurred during the resume attempt but I'm not sure. I'll include the complete dmesg lower in the e-mail for your reference.
error message found in dmesg: http://pastebin.centos.org/8851/
Here is some additional information for reference
Code: Select all
== BEGIN uname -rmi ==
3.14.0-1.el6.elrepo.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
rpmforge-release-0.5.3-1.el6.rf.x86_64
epel-release-6-8.noarch
centos-release-6-5.el6.centos.11.2.x86_64
adobe-release-x86_64-1.0-1.noarch
elrepo-release-6-6.el6.elrepo.noarch
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-52.el6.x86_64
rpm-build-4.8.0-37.el6.x86_64
rpm-libs-4.8.0-37.el6.x86_64
rpm-python-4.8.0-37.el6.x86_64
yum-3.2.29-43.el6.centos.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-17.el6_5.noarch
yum-plugin-security-1.1.30-17.el6_5.noarch
yum-utils-1.1.30-17.el6_5.noarch
== END rpm -qa yum\* rpm-\* python | sort ==
== BEGIN ls /etc/yum.repos.d ==
adobe-linux-x86_64.repo
CentOS-Base.repo
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Vault.repo
dropbox.repo
elrepo.repo
epel.repo
epel-testing.repo
google-chrome.repo
mirrors-rpmforge
mirrors-rpmforge-extras
mirrors-rpmforge-testing
rpmforge.repo
== END ls /etc/yum.repos.d ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-431.11.2.el6.x86_64
kernel-2.6.32-431.el6.x86_64
kernel-firmware-2.6.32-431.11.2.el6.noarch
kernel-headers-2.6.32-431.11.2.el6.x86_64
kernel-ml-3.14.0-1.el6.elrepo.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b)
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b)
00:03.0 Audio device [0403]: Intel Corporation Device [8086:0a0c] (rev 0b)
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB xHCI HC [8086:9c31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point-LP HECI #0 [8086:9c3a] (rev 04)
00:16.3 Serial controller [0700]: Intel Corporation Lynx Point-LP HECI KT [8086:9c3d] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I218-LM [8086:155a] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point-LP HD Audio Controller [8086:9c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 1 [8086:9c10] (rev e4)
00:1c.3 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 4 [8086:9c16] (rev e4)
00:1c.5 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 6 [8086:9c1a] (rev e4)
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB EHCI #1 [8086:9c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point-LP LPC Controller [8086:9c43] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point-LP SMBus Controller [8086:9c22] (rev 04)
02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5227] (rev 01)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 002: ID 0424:2134 Standard Microsystems Corp.
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 004: ID 138a:003f Validity Sensors, Inc.
Bus 002 Device 005: ID 04f2:b3ed Chicony Electronics Co., Ltd
Bus 003 Device 002: ID 0424:5534 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 006: ID 8087:07dc Intel Corp.
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
== END rpm -qa kmod\* kmdl\* ==
Code: Select all
== BEGIN dmesg ==
[dleclair@dleclair-lptp Downloads]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.0-1.el6.elrepo.x86_64 (mockbuild@Build64F20) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Mon Mar 31 12:32:23 EDT 2014
Command line: ro root=/dev/mapper/vg_dleclairlptp-lv_root nomodeset rd_NO_LUKS rd_LVM_LV=vg_dleclairlptp/lv_root LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_dleclairlptp/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet crashkernel=auto
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bab7efff] usable
BIOS-e820: [mem 0x00000000bab7f000-0x00000000bbe7efff] reserved
BIOS-e820: [mem 0x00000000bbe7f000-0x00000000bbf7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bbf7f000-0x00000000bbffefff] ACPI data
BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable
BIOS-e820: [mem 0x00000000bc000000-0x00000000bf1fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.07 02/09/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23ee00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00FF800000 mask 7FFF800000 write-protect
1 base 0000000000 mask 7F80000000 write-back
2 base 0080000000 mask 7FC0000000 write-back
3 base 00BE000000 mask 7FFE000000 uncachable
4 base 00BD000000 mask 7FFF000000 uncachable
5 base 0100000000 mask 7F00000000 write-back
6 base 0200000000 mask 7FC0000000 write-back
7 base 023F000000 mask 7FFF000000 uncachable
8 base 023EE00000 mask 7FFFE00000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000096000] 96000 size 28672
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0215d000, 0x0215dfff] PGTABLE
BRK [0x0215e000, 0x0215efff] PGTABLE
BRK [0x0215f000, 0x0215ffff] PGTABLE
init_memory_mapping: [mem 0x23ec00000-0x23edfffff]
[mem 0x23ec00000-0x23edfffff] page 2M
BRK [0x02160000, 0x02160fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23ebfffff]
[mem 0x23c000000-0x23ebfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbab7efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xba9fffff] page 2M
[mem 0xbaa00000-0xbab7efff] page 4k
init_memory_mapping: [mem 0xbbfff000-0xbbffffff]
[mem 0xbbfff000-0xbbffffff] page 4k
BRK [0x02161000, 0x02161fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x36d82000-0x37feffff]
ACPI: RSDP 00000000000f2fe0 000024 (v02 HPQOEM)
ACPI: XSDT 00000000bbffe120 0000B4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000bbffc000 00010C (v05 HPQOEM 198F 00000001 HP 00000001)
ACPI: DSDT 00000000bbfd1000 02529A (v02 HPQOEM 198F 00000001 INTL 20110112)
ACPI: FACS 00000000bbde4000 000040
ACPI: HPET 00000000bbffb000 000038 (v01 HPQOEM 198F 00000001 HP 00000001)
ACPI: APIC 00000000bbffa000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001)
ACPI: MCFG 00000000bbff9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001)
ACPI: TCPA 00000000bbff7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001)
ACPI: SSDT 00000000bbfce000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 00000000bbfcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: SLIC 00000000bbfcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: MSDM 00000000bbfcb000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
ACPI: FPDT 00000000bbfca000 000044 (v01 HPQOEM 198F 00000001 HP 00000001)
ACPI: BGRT 00000000bbfc9000 000038 (v00 HPQOEM 198F 00000001 HP 00000001)
ACPI: SSDT 00000000bbfc5000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112)
ACPI: SSDT 00000000bbfc4000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 00000000bbfc3000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
ACPI: SSDT 00000000bbfc2000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
ACPI: SSDT 00000000bbfc1000 0006BD (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
ACPI: ASF! 00000000bbff8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001)
ACPI: DMAR 00000000bbfc0000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023edfffff]
Initmem setup node 0 [mem 0x00000000-0x23edfffff]
NODE_DATA [mem 0x23edd7000-0x23edfdfff]
crashkernel: memory value expected
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236400000-ffff88023d3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23edfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbab7efff]
node 0: [mem 0xbbfff000-0xbbffffff]
node 0: [mem 0x100000000-0x23edfffff]
On node 0 totalpages: 2070812
DMA zone: 56 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10401 pages used for memmap
DMA32 zone: 760704 pages, LIFO batch:31
Normal zone: 17857 pages used for memmap
Normal zone: 1306112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbab7f000-0xbbe7efff]
PM: Registered nosave memory: [mem 0xbbe7f000-0xbbf7efff]
PM: Registered nosave memory: [mem 0xbbf7f000-0xbbffefff]
PM: Registered nosave memory: [mem 0xbc000000-0xbf1fffff]
PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xbf200000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023ea00000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042476
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_dleclairlptp-lv_root nomodeset rd_NO_LUKS rd_LVM_LV=vg_dleclairlptp/lv_root LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_dleclairlptp/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet crashkernel=auto
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 8064396K/8283248K available (6419K kernel code, 1319K rwdata, 3136K rodata, 1980K init, 2160K bss, 218852K reserved)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:1016 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.780 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.56 BogoMIPS (lpj=2693780)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81f3a000 - ffffffff81f3f000)
ftrace: allocating 26296 entries in 103 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000bbd18000 end: 0x000000bbd37fff
dmar: RMRR base: 0x000000bd000000 end: 0x000000bf1fffff
IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21550.24 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbbe7f000-0xbbf7efff] (1048576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bbde2918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: SSDT 00000000bbde3698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: SSDT 00000000bbde1d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (on)
ACPI: Power Resource [LPP] (on)
ACPI: Power Resource [PXP6] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
pci 0000:00:16.3: reg 0x14: [mem 0xd073f000-0xd073ffff]
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbab7f000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0200-0x027f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [io 0xef80-0xef9f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs HPQ6007 (active)
system 00:09: [mem 0x20000000-0x201fffff] could not be reserved
system 00:09: [mem 0x40004000-0x40004fff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:14.0: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18872K (ffff880036d82000 - ffff880037ff0000)
DMAR: No ATSR found
IOMMU 0 0xfed90000: using Queued invalidation
IOMMU 1 0xfed91000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xbd000000 - 0xbf1fffff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbbd18000 - 0xbbd37fff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xbbd18000 - 0xbbd37fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1397399530.208:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15916
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 59 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 60 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.5:pcie04: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (42 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (38 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (29 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (114 C)
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.0-1.el6.elrepo.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
rtc_cmos 00:05: setting system clock to 2014-04-13 14:32:11 UTC (1397399531)
Freeing unused kernel memory: 1980K (ffffffff81d4b000 - ffffffff81f3a000)
Write protecting the kernel read-only data: 12288k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Freeing unused kernel memory: 1760K (ffff880001648000 - ffff880001800000)
Freeing unused kernel memory: 960K (ffff880001b10000 - ffff880001c00000)
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (95): /proc/95/oom_adj is deprecated, please use /proc/95/oom_score_adj instead.
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 62 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.0-1.el6.elrepo.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.14.0-1.el6.elrepo.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
wmi: Mapper loaded
usb 1-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 63 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 63
ata2: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=0424, idProduct=5534
usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-3: Product: USB5534B
usb 3-3: Manufacturer: SMSC
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
usb 2-3: new high-speed USB device number 2 using xhci_hcd
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 2693.763 MHz
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-3: New USB device found, idVendor=0424, idProduct=2134
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB2134B
usb 2-3: Manufacturer: SMSC
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-4: new full-speed USB device number 3 using xhci_hcd
input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
usb 2-4: New USB device found, idVendor=046d, idProduct=c52b
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Receiver
usb 2-4: Manufacturer: Logitech
usb 2-5: new full-speed USB device number 4 using xhci_hcd
usb 2-5: New USB device found, idVendor=138a, idProduct=003f
usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 2-5: SerialNumber: 00a08c401292
usb 2-7: new high-speed USB device number 5 using xhci_hcd
Switched to clocksource tsc
usb 2-7: New USB device found, idVendor=04f2, idProduct=b3ed
usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-7: Product: HP HD Webcam
usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd.
usb 2-7: SerialNumber: 200901010001
usb 2-3.2: new full-speed USB device number 6 using xhci_hcd
psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800, board id: 2768, fw id: 1478018
usb 2-3.2: New USB device found, idVendor=8087, idProduct=07dc
usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
dracut: Scanning devices sda2 for LVM logical volumes vg_dleclairlptp/lv_root vg_dleclairlptp/lv_swap
random: lvm urandom read with 68 bits of entropy available
dracut: inactive '/dev/vg_dleclairlptp/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_dleclairlptp/lv_home' [873.30 GiB] inherit
dracut: inactive '/dev/vg_dleclairlptp/lv_swap' [7.72 GiB] inherit
bio: create slab <bio-1> at 1
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): 12 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_dleclairlptp-lv_root
dracut: Loading SELinux policy
audit: type=1404 audit(1397399535.858:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277805 rules.
SELinux: 2048 avtab hash slots, 277805 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277805 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: Permission wake_alarm in class capability2 not defined in policy.
SELinux: Permission block_suspend in class capability2 not defined in policy.
SELinux: Permission attach_queue in class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-0, type ext4), uses xattr
audit: type=1403 audit(1397399536.322:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
WARNING! power/level is deprecated; use power/control instead
------------[ cut here ]------------
WARNING: CPU: 2 PID: 36 at drivers/gpu/drm/i915/intel_pm.c:5331 i915_request_power_well+0x39/0x40 [i915]()
Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore ext4 jbd2 mbcache sd_mod crc_t10dif crct10dif_common ahci libahci wmi xhci_hcd i915 drm_kms_helper video dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 36 Comm: kworker/2:1 Not tainted 3.14.0-1.el6.elrepo.x86_64 #1
Hardware name: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.07 02/09/2014
Workqueue: events azx_probe_work [snd_hda_intel]
00000000000014d3 ffff8802338cbd48 ffffffff816328e7 00000000000014d3
0000000000000000 ffff8802338cbd88 ffffffff8106ceac ffffffffa00d8080
ffff880230be6000 0000000000000000 0000000000000000 ffff880233900000
Call Trace:
[<ffffffff816328e7>] dump_stack+0x49/0x62
[<ffffffff8106ceac>] warn_slowpath_common+0x8c/0xc0
[<ffffffff8106cefa>] warn_slowpath_null+0x1a/0x20
[<ffffffffa00b6509>] i915_request_power_well+0x39/0x40 [i915]
[<ffffffffa02aca42>] hda_display_power+0x42/0x50 [snd_hda_intel]
[<ffffffffa02ab17b>] azx_probe_continue+0x4b/0x2a0 [snd_hda_intel]
[<ffffffffa02ab3e5>] azx_probe_work+0x15/0x20 [snd_hda_intel]
[<ffffffff810898fc>] process_one_work+0x17c/0x420
[<ffffffff8108b043>] worker_thread+0x123/0x400
[<ffffffff8108af20>] ? manage_workers+0x170/0x170
[<ffffffff81090b0e>] kthread+0xce/0xf0
[<ffffffff81090a40>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff8164003c>] ret_from_fork+0x7c/0xb0
[<ffffffff81090a40>] ? kthread_freezable_should_stop+0x70/0x70
---[ end trace a04595e39d7e51e2 ]---
snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
e1000e 0000:00:19.0: PHY reset is blocked due to SOL/IDER session.
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c4:34:6b:26:76:ff
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input19
hp_accel: hardware type HPB64xx found
lis3lv02d: 8 bits 3DC sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed)
input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
bluetooth hci0: Direct firmware load failed with error -2
bluetooth hci0: Falling back to user helper
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2)
bluetooth hci0: Direct firmware load failed with error -2
bluetooth hci0: Falling back to user helper
Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq
input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input22
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:14.0-4:1
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:02:00.0: irq 67 for MSI/MSI-X
iwlwifi 0000:02:00.0: Direct firmware load failed with error -2
iwlwifi 0000:02:00.0: Falling back to user helper
rtsx_pci 0000:03:00.0: irq 68 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 68
iwlwifi 0000:02:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPIO) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000080f (\IO_T) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ACPI Warning: SystemIO range 0x000000000000ef80-0x000000000000ef9f conflicts with OpRegion 0x000000000000ef80-0x000000000000ef8f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input23
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
input: HP WMI hotkeys as /devices/virtual/input/input24
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 8093692k swap on /dev/mapper/vg_dleclairlptp-lv_swap. Priority:-1 extents:1 across:8093692k FS
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 74:44:01:51:35:16
wlan0: send auth to 74:44:01:51:35:16 (try 1/3)
wlan0: authenticated
wlan0: associate with 74:44:01:51:35:16 (try 1/3)
wlan0: RX AssocResp from 74:44:01:51:35:16 (capab=0x11 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
8021q: 802.1Q VLAN Support v1.8
wlan0: deauthenticating from 74:44:01:51:35:16 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 74:44:01:51:35:16
wlan0: send auth to 74:44:01:51:35:16 (try 1/3)
wlan0: authenticated
wlan0: associate with 74:44:01:51:35:16 (try 1/3)
wlan0: RX AssocResp from 74:44:01:51:35:16 (capab=0x11 status=0 aid=1)
wlan0: associated
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.22)
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
nr_pdflush_threads exported in /proc is scheduled for removal
sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
[dleclair@dleclair-lptp Downloads]$
== END dmesg ==
