Code: Select all
$ lsusb
I did the
Code: Select all
$ sudo modprobe usbserial vendor=1a86 product=7523
Code: Select all
$ dmesg | egrep --color 'ttyUS*'
usb 4-1: ch341-uart converter now attached to ttyUSB0
$ ls -al /dev/tty*|grep -i usb
crwxrwxrwx. 1 me me 188, 0 Jan 29 09:00 /dev/ttyUSB0
But after connecting to this device using different option it wont display anything on the session. I use putty and it would open the session but it only displays a black screen. Same happen using the package "screen" after
Code: Select all
sudo screen /dev/ttyUSB0