Page 1 of 1

hard disk problem

Posted: 2019/08/10 23:59:14
by nix99
Hi

syslog is reporting an issue with one of the disks, I asked the isp to change the cable but still getting the same errors:

----------------------------
Aug 11 02:38:26 dr kernel: ata1: SATA max UDMA/133 abar m2048@0xb1200000 port 0xb1200100 irq 31
Aug 11 02:38:26 dr kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 11 02:38:26 dr kernel: ata1.00: supports DRM functions and may not be fully accessable.
Aug 11 02:38:26 dr kernel: ata1.00: ATA-10: ST10000NM0156-2AA111, SS02, max UDMA/133
Aug 11 02:38:26 dr kernel: ata1.00: 19532873728 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Aug 11 02:38:26 dr kernel: ata1.00: supports DRM functions and may not be fully accessable.
Aug 11 02:38:26 dr kernel: ata1.00: configured for UDMA/133
----------------------------

TIA.

Re: hard disk problem

Posted: 2019/08/11 06:16:50
by avij
That does not look like an error to me?

Re: hard disk problem

Posted: 2019/08/11 14:13:05
by nix99
Sorry, this is the error I should post

--------------
Aug 10 22:41:54 dr kernel: [1455175.138946] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Aug 10 22:41:54 dr kernel: [1455175.139311] ata1.00: failed command: FLUSH CACHE EXT
Aug 10 22:41:54 dr kernel: [1455175.139502] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 15
Aug 10 22:41:54 dr kernel: [1455175.140060] ata1.00: status: { DRDY }
Aug 10 22:41:54 dr kernel: [1455175.456591] ata1.00: supports DRM functions and may not be fully accessable.
Aug 10 22:41:54 dr kernel: [1455175.458181] ata1.00: supports DRM functions and may not be fully accessable.
Aug 10 22:41:54 dr kernel: [1455175.458291] ata1.00: configured for UDMA/133
--------------

Thank you.