Hi
syslog is reporting an issue with one of the disks, I asked the isp to change the cable but still getting the same errors:
----------------------------
Aug 11 02:38:26 dr kernel: ata1: SATA max UDMA/133 abar m2048@0xb1200000 port 0xb1200100 irq 31
Aug 11 02:38:26 dr kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 11 02:38:26 dr kernel: ata1.00: supports DRM functions and may not be fully accessable.
Aug 11 02:38:26 dr kernel: ata1.00: ATA-10: ST10000NM0156-2AA111, SS02, max UDMA/133
Aug 11 02:38:26 dr kernel: ata1.00: 19532873728 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Aug 11 02:38:26 dr kernel: ata1.00: supports DRM functions and may not be fully accessable.
Aug 11 02:38:26 dr kernel: ata1.00: configured for UDMA/133
----------------------------
TIA.
Hard disk issue
Re: Hard disk issue
There are no error messages in that quoted output. All is normal. Which bit were you worried about?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke