Code: Select all
Address: 192.168.1.8
NetMask: 255.255.255.0
Gateway: 192.168.1.1
also I configured eth1 with static IP setting it's not working but in old server (with centos 5.5) with same static IP setting works fine.
When I ping my static address from server it pings but from other systems it's not even ping.
I tried mostly possible things like swapping eth0 & eth1 configuration etc.. So plz help guys
This is my
Code: Select all
/etc/sysconfig/network-scripts/ifcfg-eth0
Code: Select all
DEVICE=eth0
TYPE=Ethernet
UUID=bb77xx71-76ff-4x15-x4x3-315228758484
ONBOOT=no
NM_CONTROLLED=yes
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
BOOTPROTO=none
IPADDR=192.168.1.8
PREFIX=24
GATEWAY=192.168.1.1
DNS1=202.xx.2xx.x
DNS2=202.xx.2xx.x
HWADDR=5x:x3:Fx:x1:x8:8x
LAST_CONNECT=1432728265
Code: Select all
/etc/sysconfig/network-scripts/ifcfg-eth1
Code: Select all
DEVICE=eth1
TYPE=Ethernet
UUID=38x68x8x-6xx0-4xxb-9xx1-4x7988x2x9x5
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
IPADDR=1xx.xx.2xx.2xx
PREFIX=29
GATEWAY=1xx.xx.2xx.2xx
DEFROUTE=no
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
DNS1=202.xx.2xx.x
DNS2=202.xx.2xx.x
HWADDR=5x:x3:xx:x1:x8:xx
LAST_CONNECT=1432730341