how to install BCM43142 driver on Centos6.7 without internet

[abdossamad2003]

i am begginer in use centos after install centos 6.7 in my computer, the wireless don't work.I need to wireless driver help me
lscpi -vnn
Network Controller[0280]: Broadcom Corporation BCM43142 802.11 b/g/n [14 e4:4365] (rev 01)

uname -r
2.6.32-523.el6.x86_64

[toracat]

kernel 2.6.32-523.el6, is this a typo?

If you have a CentOS 6.7 kernel, your device [14e4:4365] is supported by the bcma driver. Does 'lsmod' show this module?

[abdossamad2003]

hi thanks for reply
sorry my kernel is 2.6.32-573.el6.x86_64
lsmod output is:
[Samad@localhost ~]$ lsmod
Module Size Used by
fuse 79892 4
ebtable_nat 2009 0
ebtables 18135 1 ebtable_nat
ipt_MASQUERADE 2338 3
iptable_nat 5923 1
nf_nat 22676 2 ipt_MASQUERADE,iptable_nat
xt_CHECKSUM 1303 1
iptable_mangle 3349 1
rfcomm 71079 4
sco 17493 2
bridge 84537 0
bnep 16370 2
l2cap 54306 16 rfcomm,bnep
autofs4 27000 3
8021q 20362 0
garp 7152 1 8021q
stp 2218 2 bridge,garp
llc 5418 3 bridge,garp,stp
cpufreq_ondemand 10544 4
acpi_cpufreq 7763 1
freq_table 4936 2 cpufreq_ondemand,acpi_cpufreq
mperf 1557 1 acpi_cpufreq
ipt_REJECT 2351 4
nf_conntrack_ipv4 9154 6 iptable_nat,nf_nat
nf_defrag_ipv4 1483 1 nf_conntrack_ipv4
iptable_filter 2793 1
ip_tables 17831 3 iptable_nat,iptable_mangle,iptable_filter
ip6t_REJECT 4340 2
nf_conntrack_ipv6 7985 3
nf_defrag_ipv6 26468 1 nf_conntrack_ipv6
xt_state 1492 6
nf_conntrack 79206 6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
ip6table_filter 2889 1
ip6_tables 18732 1 ip6table_filter
ipv6 335589 48 bridge,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
vhost_net 29185 0
macvtap 10551 1 vhost_net
macvlan 10324 1 macvtap
tun 16934 2 vhost_net
kvm_intel 55624 0
kvm 341551 1 kvm_intel
uinput 8120 0
sg 29318 0
rtsx_usb_sdmmc 20484 0
mmc_core 85330 1 rtsx_usb_sdmmc
joydev 10480 0
microcode 112205 0
serio_raw 4626 0
iTCO_wdt 7115 0
iTCO_vendor_support 3056 1 iTCO_wdt
btusb 16915 2
bluetooth 97895 9 rfcomm,sco,bnep,l2cap,btusb
r8169 74378 0
mii 5376 1 r8169
bcma 45000 0
uvcvideo 62688 0
videodev 75708 1 uvcvideo
v4l2_compat_ioctl32 7110 1 videodev
rtsx_usb 13605 1 rtsx_usb_sdmmc
dell_laptop 6316 0
snd_hda_codec_hdmi 45492 1
rfkill 19255 4 bluetooth,dell_laptop
dcdbas 8707 1 dell_laptop
snd_hda_codec_conexant 12378 1
i2c_i801 10559 0
snd_hda_codec_generic 62014 1 snd_hda_codec_conexant
lpc_ich 12963 0
mfd_core 1895 2 rtsx_usb,lpc_ich
snd_hda_intel 55222 4
snd_hda_codec 136309 4 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel
snd_hwdep 7100 1 snd_hda_codec
snd_seq 60769 0
snd_seq_device 7277 1 snd_seq
snd_pcm 93793 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 22747 2 snd_seq,snd_pcm
snd 73783 17 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 7958 2 snd_hda_codec,snd
snd_page_alloc 8856 2 snd_hda_intel,snd_pcm
shpchp 29130 0
ext4 378683 1
jbd2 93252 1 ext4
mbcache 8193 1 ext4
sd_mod 37030 5
crc_t10dif 1209 1 sd_mod
sr_mod 15049 0
cdrom 39085 1 sr_mod
ahci 42738 4
xhci_hcd 183583 0
wmi 6287 0
i915 1015889 2
video 21654 1 i915
output 2409 1 video
radeon 1734542 0
ttm 89408 1 radeon
drm_kms_helper 88766 2 i915,radeon
drm 320992 6 i915,radeon,ttm,drm_kms_helper
i2c_algo_bit 5711 2 i915,radeon
i2c_core 29132 7 videodev,i2c_i801,i915,radeon,drm_kms_helper,drm,i2c_algo_bit
dm_mirror 14384 0
dm_region_hash 12085 1 dm_mirror
dm_log 9930 2 dm_mirror,dm_region_hash
dm_mod 99200 2 dm_mirror,dm_log
my wireless have not been detect please help me

[AlanBartlett]

Confirming, for toracat, that the Vendor:Device ID pairing does indeed point to the bcma module in the distribution kernel and "future" kernels --

Code: Select all

[Duo2 ~]$ grep -i 14e4 /lib/modules/*/modules.alias | grep -i 4365
/lib/modules/2.6.32-573.7.1.el6.x86_64/modules.alias:alias pci:v000014E4d00004365sv*sd*bc*sc*i* bcma
/lib/modules/3.18.22-1.el6.elrepo.x86_64/modules.alias:alias pci:v000014E4d00004365sv*sd*bc*sc*i* bcma
/lib/modules/4.1.10-1.el6.elrepo.x86_64/modules.alias:alias pci:v000014E4d00004365sv*sd*bc*sc*i* bcma
/lib/modules/4.2.3-1.el6.elrepo.x86_64/modules.alias:alias pci:v000014E4d00004365sv*sd*bc*sc*i* bcma
/lib/modules/4.3.0-0.rc4.el6.elrepo.x86_64/modules.alias:alias pci:v000014E4d00004365sv*sd*bc*sc*i* bcma
[Duo2 ~]$

abdossamad2003 -- Please try the following:

• dmesg | tail -n 10
• modprobe bcma
• dmesg | tail -n 10

We really need to see what messages are logged in the kernel ring-buffer as a result of attempting to modprobe the bcma module.

[gerald_clark]

It is already loaded.

r8169 74378 0
mii 5376 1 r8169
bcma 45000 0
uvcvideo 62688 0
videodev 75708 1 uvcvideo

[AlanBartlett]

It is already loaded.

r8169 74378 0
mii 5376 1 r8169
bcma 45000 0
uvcvideo 62688 0
videodev 75708 1 uvcvideo

Thanks, Gerald. For some reason I completely missed its presence.

So perhaps the OP would try the following:

• dmesg | tail -n 10
• modprobe -r bcma
• dmesg | tail -n 10
• modprobe bcma
• dmesg | tail -n 10

and post the entire response to the above five command lines.

[abdossamad2003]

It is already loaded.

r8169 74378 0
mii 5376 1 r8169
bcma 45000 0
uvcvideo 62688 0
videodev 75708 1 uvcvideo

Thanks, Gerald. For some reason I completely missed its presence.

So perhaps the OP would try the following:

• dmesg | tail -n 10
• modprobe -r bcma
• dmesg | tail -n 10
• modprobe bcma
• dmesg | tail -n 10

and post the entire response to the above five command lines.

thanks for attention
my output is:




please help me

[abdossamad2003]

please help me my system don't detect the wireless card.

[TrevorH]

Please run ifconfig -a and post the output

[abdossamad2003]

hi thanks fro reply
iconfig -a output is: