[SOLVED] Nic Bond
[SOLVED] Nic Bond
Hello,
my problem is that i can not get a nic bond0 to work with the gateway.
configuration
/etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=172.16.XXX.XXX
NETMASK=255.255.252.0
GATEWAY=172.16.XXX.XXX (the IP's are all o.k.)
USERCTL=NO
BOOTPROTO=none
ONBOOT=yes
/etc/sysconfig/network-scripts/ifcfg-em1 & /etc/sysconfig/network-scripts/ifcfg-em2 (GigabitEthernet Interfaces)
DEVICE=em1 (changed in /etc/sysconfig/network-scripts/ifcfg-em2 to em2
USERCTL=no
MASTER=bond0
SLAVE=yes
BOOTPROTO=none
ONBOOT=yes
/etc/modeprobe.d/bonding.conf
alias bond0 bonding
options bond0 mode=0 miimon=100
ifconfig shows
bond0 Link encap:Ethernet ......
em1 Link encap:Ethernet ........
em2 Link encap:Ethernet ........
Problem is that i can not access the Server from a diffrent VLAN that is routed. If i setup a network connection without bond0 i can access the Server from that routed VLAN.
any help would be apreciated Thank you in advanced
my problem is that i can not get a nic bond0 to work with the gateway.
configuration
/etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=172.16.XXX.XXX
NETMASK=255.255.252.0
GATEWAY=172.16.XXX.XXX (the IP's are all o.k.)
USERCTL=NO
BOOTPROTO=none
ONBOOT=yes
/etc/sysconfig/network-scripts/ifcfg-em1 & /etc/sysconfig/network-scripts/ifcfg-em2 (GigabitEthernet Interfaces)
DEVICE=em1 (changed in /etc/sysconfig/network-scripts/ifcfg-em2 to em2
USERCTL=no
MASTER=bond0
SLAVE=yes
BOOTPROTO=none
ONBOOT=yes
/etc/modeprobe.d/bonding.conf
alias bond0 bonding
options bond0 mode=0 miimon=100
ifconfig shows
bond0 Link encap:Ethernet ......
em1 Link encap:Ethernet ........
em2 Link encap:Ethernet ........
Problem is that i can not access the Server from a diffrent VLAN that is routed. If i setup a network connection without bond0 i can access the Server from that routed VLAN.
any help would be apreciated Thank you in advanced
-
- Retired Moderator
- Posts: 18276
- Joined: 2006/12/13 20:15:34
- Location: Tidewater, Virginia, North America
- Contact:
Re: Nic Bond
Welcome to the CentOS fora. Please see the recommended reading for new users linked in my signature.
Please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh network" and showing us the output file.
Please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh network" and showing us the output file.
Re: Nic Bond
Thank you for the quick reply please find enclosed the requested file.
Information for network problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.2.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-6-2.el6.centos.7.x86_64
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.2 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 24016 1101 22914 0 27 448
-/+ buffers/cache: 625 23390
Swap: 23999 0 23999
== END free -m ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port [8086:3403] (rev 13)
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13)
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13)
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13)
00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13)
00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13)
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13)
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13)
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13)
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
00:1d.3 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26]
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 1078 [1000:0060] (rev 04)
04:00.0 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA [1077:2532] (rev 02)
04:00.1 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA [1077:2532] (rev 02)
06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 003 Device 002: ID 1061:0101
== END lsusb ==
== BEGIN ifconfig -a ==
em1 Link encap:Ethernet HWaddr 78:2B:CB:5A:1A:AA
inet addr:172.16.184.36 Bcast:172.16.187.255 Mask:255.255.252.0
inet6 addr: fe80::7a2b:cbff:fe5a:1aaa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13468 errors:0 dropped:0 overruns:0 frame:0
TX packets:3170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7098881 (6.7 MiB) TX bytes:469939 (458.9 KiB)
Interrupt:36 Memory:da000000-da012800
em2 Link encap:Ethernet HWaddr 78:2B:CB:5A:1A:AB
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:48 Memory:dc000000-dc012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:960 (960.0 b) TX bytes:960 (960.0 b)
== END ifconfig -a ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
172.16.184.0 0.0.0.0 255.255.252.0 U 1 0 0 em1
0.0.0.0 172.16.184.1 0.0.0.0 UG 0 0 0 em1
== END route -n ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search intern.optovision.de
nameserver 192.168.184.156
== END cat /etc/resolv.conf ==
== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
matahari-network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==
[/code]
Information for network problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.2.1.el6.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-6-2.el6.centos.7.x86_64
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.2 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 24016 1101 22914 0 27 448
-/+ buffers/cache: 625 23390
Swap: 23999 0 23999
== END free -m ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port [8086:3403] (rev 13)
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13)
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13)
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13)
00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13)
00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13)
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13)
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13)
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13)
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
00:1d.3 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26]
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 1078 [1000:0060] (rev 04)
04:00.0 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA [1077:2532] (rev 02)
04:00.1 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA [1077:2532] (rev 02)
06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 003 Device 002: ID 1061:0101
== END lsusb ==
== BEGIN ifconfig -a ==
em1 Link encap:Ethernet HWaddr 78:2B:CB:5A:1A:AA
inet addr:172.16.184.36 Bcast:172.16.187.255 Mask:255.255.252.0
inet6 addr: fe80::7a2b:cbff:fe5a:1aaa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13468 errors:0 dropped:0 overruns:0 frame:0
TX packets:3170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7098881 (6.7 MiB) TX bytes:469939 (458.9 KiB)
Interrupt:36 Memory:da000000-da012800
em2 Link encap:Ethernet HWaddr 78:2B:CB:5A:1A:AB
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:48 Memory:dc000000-dc012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:960 (960.0 b) TX bytes:960 (960.0 b)
== END ifconfig -a ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
172.16.184.0 0.0.0.0 255.255.252.0 U 1 0 0 em1
0.0.0.0 172.16.184.1 0.0.0.0 UG 0 0 0 em1
== END route -n ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search intern.optovision.de
nameserver 192.168.184.156
== END cat /etc/resolv.conf ==
== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
matahari-network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==
[/code]
-
- Retired Moderator
- Posts: 18276
- Joined: 2006/12/13 20:15:34
- Location: Tidewater, Virginia, North America
- Contact:
[SOLVED] Nic Bond
Nothing obvious to me from that information. Hopefully someone else can spot something. Might be useful to see the script output for the configuration that fails.
Re: Nic Bond
It's recommended to put BONDING_OPTS in your ifcfg-bondx file these days, e.g.
[code]
BONDING_OPTS="mode=4 miimon=100"
[/code]
It's also not necessary to put the alias in modprobe.conf either so I would remove all mention of bonding from there. My GATEWAY= line is in /etc/sysconfig/network and not in the file for the interface so I think you should move it there. I also have HWADDR=ma:ca:dd:re:ss in each of the ifcfg-ethx files for each of the slaves.
[code]
BONDING_OPTS="mode=4 miimon=100"
[/code]
It's also not necessary to put the alias in modprobe.conf either so I would remove all mention of bonding from there. My GATEWAY= line is in /etc/sysconfig/network and not in the file for the interface so I think you should move it there. I also have HWADDR=ma:ca:dd:re:ss in each of the ifcfg-ethx files for each of the slaves.
Re: Nic Bond
[quote]optoOS wrote:
[code]== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off[/code][/quote]
I would call "both on" an issue.
chkconfig NetworkManager off
service NetworkManager stop
yum remove \*NetworkManager\*
NetworkManager may be ok with simple interfaces, but with vlans,
bondage, etc it leads to pain and suffering.
[code]== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off[/code][/quote]
I would call "both on" an issue.
chkconfig NetworkManager off
service NetworkManager stop
yum remove \*NetworkManager\*
NetworkManager may be ok with simple interfaces, but with vlans,
bondage, etc it leads to pain and suffering.
Re: Nic Bond
[quote]
bondage, etc it leads to pain and suffering.
[/quote]
Pun intended? :-)
bondage, etc it leads to pain and suffering.
[/quote]
Pun intended? :-)
Re: Nic Bond
THANK YOU i followed all the advices but the uninstalling of the NetworkManager did the trick. THANK YOU
-
- Retired Moderator
- Posts: 18276
- Joined: 2006/12/13 20:15:34
- Location: Tidewater, Virginia, North America
- Contact:
Re: [SOLVED] Nic Bond
Thanks for reporting back. Marking this thread [SOLVED] for posterity.