I seem to get logged into the NetApp filer fine - it shows the session, but I don't get a device.
And don't panic - the system is CentOS 5.4, but the system is named OpenVMS (don't ask . . . )
iscsiadm shows me logged into the NetApp and the session is up.
[root@OpenVMS ~]# iscsiadm -m session -P 2
Target: iqn.1992-08.com.netapp:sn.84278807
Current Portal: 172.16.14.85:3260,1000
Persistent Portal: 172.16.14.85:3260,1000
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1994-05.com.redhat:OpenVMS
Iface IPaddress: 172.16.14.71
Iface HWaddress:
Iface Netdev:
SID: 1
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 262144
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 65536
ImmediateData: Yes
InitialR2T: No
MaxOutstandingR2T: 1
[root@OpenVMS ~]#
an iscsi restart shows a successful login (and an unsuccessful one too)
[root@OpenVMS ~]# /etc/init.d/iscsi restart
Logging out of session [sid: 1, target: iqn.1992-08.com.netapp:sn.84278807, port
al: 172.16.14.85,3260]
Logout of [sid: 1, target: iqn.1992-08.com.netapp:sn.84278807, portal: 172.16.14
.85,3260]: successful
Stopping iSCSI daemon:
iscsid dead but pid file exists [ OK ]
Turning off network shutdown. Starting iSCSI daemon: [ OK ]
[ OK ]
Setting up iSCSI targets: Logging in to [iface: default, target: iqn.1992-08.com
.netapp:sn.84278807, portal: 172.16.14.85,3260]
Logging in to [iface: default, target: iqn.1992-08.com.netapp:sn.84278807, porta
l: 172.16.14.86,3260]
Login to [iface: default, target: iqn.1992-08.com.netapp:sn.84278807, portal: 17
2.16.14.85,3260]: successful
iscsiadm: Could not login to [iface: default, target: iqn.1992-08.com.netapp:sn.
84278807, portal: 172.16.14.86,3260]:
iscsiadm: initiator reported error (8 - connection timed out)
iscsiadm: Could not log into all portals. Err 8.
[ OK ]
so it connects successfully the first time, but not the 2nd. Methinks it's trying to connect via the loopback interface in addition to eth0
All help is appreciated.
Doug
[Moderator edited to remove the e-mail address. See following posts.]
iSCSI LUN Not Appearing as /dev/sdb
Re: iSCSI LUN Not Appearing as /dev/sdb
Doug, it is not smart to make your e-mail (or any other contact information) in your posts or signature. There are many people that will abuse it in a second.
Re: iSCSI LUN Not Appearing as /dev/sdb
Thanks for the reminder . . .
Also, I found out what the problem was. The NetApp admin had put my system's FQDN in the iqn string while I was using just the hostname.
Changing that fixed it.
And I found out why one login is failing - it's "saved" a login with at typo - .86 not .85, but I don't know how to use iscsiadm to delete it . . .
Thanks
Also, I found out what the problem was. The NetApp admin had put my system's FQDN in the iqn string while I was using just the hostname.
Changing that fixed it.
And I found out why one login is failing - it's "saved" a login with at typo - .86 not .85, but I don't know how to use iscsiadm to delete it . . .
Thanks