Page 1 of 1

add new range to dhcp server

Posted: 2017/02/24 14:21:15
by yonibar81
Hello,
As shown in the attached file, my scope on dhcp is 172.26.30.100-150.
i want to add more tange on scope 172.26.40.100-150.
how can i do it ?

Re: add new range to dhcp server

Posted: 2017/02/26 07:03:59
by aks
Given your subnet mask is /24, 172.26.40.0/24 is a different subnet. You can add the new network definition and dhcp-relay from 172.26.40.0/24 to 172.26.30.0/24, or you can go to 172.26.40.0/24's DHCP server and do it there.

Re: add new range to dhcp server

Posted: 2017/02/26 14:30:38
by TrevorH
Bear in mind that for any subnets you want to serve with your DHCP server, you must have an interface with an ip address that is within that subnet.

Re: add new range to dhcp server

Posted: 2017/02/27 18:12:41
by aks
... or you can use a relay (dhcp-relay) to forward those requests ....