cdrom mount ->system freeze

Support for the other architectures (X86_64, IA-64, and PowerPC)
Post Reply
tenim
Posts: 3
Joined: 2010/05/03 06:37:06

cdrom mount ->system freeze

Post by tenim » 2010/05/03 07:02:23

hello !


i have a problem with centos 5.4 64bit. if i try to mount a cd/dvd, the system freezes after few seconds.
no further action is possible, no mouse, keyboard -nothing. only a hard reset helps.
this appears under gnome with the automount feature(by inserting a medium) and with manually mounts
in a gnome shell (mount /dev/scd0 /mnt). in runlevel 3 the mount fails also, but the system doesn´t freeze.
in var/log/messages the following entries are made:

>May 2 19:46:32 mainframe pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found
>May 2 19:46:32 mainframe kernel: gdm-rh-security[3344]: segfault at 0000000000000000 rip 00002af26382819c rsp 00000000427c6eb0 error 4

this is confusing, because the install of the os was no problem. he mounted the dvd and installed the os properly.

my system:
* centos 5.4 64bit
* intel core 2 quad q9650
* asus p5e3 pro
* 8gb ram (kingston ddr3, 10666)

the cdrom drive is connected to the motherboard over an ide cable.

hope this infos help.

pschaff
Retired Moderator
Posts: 18276
Joined: 2006/12/13 20:15:34
Location: Tidewater, Virginia, North America
Contact:

cdrom mount ->system freeze

Post by pschaff » 2010/05/03 12:29:01

Welcome to the CentOS fora. The following reading is recommended for new users:
[url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=14274&forum=47]Readme First[/url]
[url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=14408&forum=47]Installing Software[/url]
[url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=14273&forum=47]Where to Find Answers[/url]
[url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=25128&forum=47]How to provide information about your system[/url]

Please show them results of "./getinfo.sh" as explained in the 4th link above.

tenim
Posts: 3
Joined: 2010/05/03 06:37:06

Re: cdrom mount ->system freeze

Post by tenim » 2010/05/04 06:49:04

ok, here comes the infos. note: the mac-address of my nic is obfuscated.


== BEGIN uname -rmi ==
2.6.18-164.el5 x86_64 x86_64
== END uname -rmi ==

== BEGIN rpm -q centos-release ==
centos-release-5-4.el5.centos.1
== END rpm -q centos-release ==

== BEGIN getenforce ==
Disabled
== END getenforce ==

== BEGIN rpm -q yum rpm python ==
yum-3.2.22-20.el5.centos
rpm-4.4.2.3-18.el5
python-2.4.3-27.el5
== END rpm -q yum rpm python ==

== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
== END ls /etc/yum.repos.d ==

== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
distroverpkg=redhat-release
tolerant=1
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1

# Note: yum-RHN-plugin doesn't honor this.
metadata_expire=1h

installonly_limit = 5

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==

== BEGIN yum repolist all ==
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
repo id repo name status
addons CentOS-5 - Addons disabled
base CentOS-5 - Base disabled
c5-media CentOS-5 - Media disabled
centosplus CentOS-5 - Plus disabled
contrib CentOS-5 - Contrib disabled
extras CentOS-5 - Extras disabled
updates CentOS-5 - Updates disabled
repolist: 0
== END yum repolist all ==

== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==

== BEGIN cat /etc/fstab ==
LABEL=/1 / ext3 defaults 1 1
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sda10 /mnt/daten ext3 defaults 0 2
== END cat /etc/fstab ==

== BEGIN df -h ==
Dateisystem Größe Benut Verf Ben% Eingehängt auf
/dev/sda8 7,8G 2,7G 4,7G 37% /
tmpfs 3,9G 0 3,9G 0% /dev/shm
/dev/sda10 15G 241M 14G 2% /mnt/daten
/dev/sdb1 1,9G 483M 1,4G 26% /media/USB DISK
== END df -h ==

== BEGIN fdisk -l ==

Platte /dev/sda: 160.0 GByte, 160041885696 Byte
255 heads, 63 sectors/track, 19457 cylinders
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes

Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 1521 12217401 7 HPFS/NTFS
/dev/sda2 1522 19457 144070920 f W95 Erw. (LBA)
/dev/sda5 1522 2566 8393931 7 HPFS/NTFS
/dev/sda6 2567 14123 92831571 7 HPFS/NTFS
/dev/sda7 14124 16008 15141231 7 HPFS/NTFS
/dev/sda8 16009 17054 8401963+ 83 Linux
/dev/sda9 * 17055 17577 4200966 83 Linux
/dev/sda10 17578 19457 15101068+ 83 Linux

Platte /dev/sdb: 2004 MByte, 2004877312 Byte
65 heads, 32 sectors/track, 1882 cylinders
Einheiten = Zylinder von 2080 × 512 = 1064960 Bytes

Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 * 1 1883 1957840 6 FAT16
== END fdisk -l ==

== BEGIN blkid ==
/dev/sda10: UUID="7bbaf669-ed1d-4f78-9172-51d0c8dabfb1" TYPE="ext3"
/dev/sda9: LABEL="/" UUID="a3bf5bec-a9b3-4bf9-b1bb-48ef2f93b91c" TYPE="ext3"
/dev/sda8: LABEL="/1" UUID="96c925ec-47fc-41bd-9c29-a08d70b70395" TYPE="ext3"
/dev/sda1: TYPE="ntfs"
/dev/sda5: TYPE="ntfs"
/dev/sda6: TYPE="ntfs"
/dev/sda7: TYPE="ntfs"
/dev/sdb1: SEC_TYPE="msdos" LABEL="USB DISK" UUID="F49E-4FD3" TYPE="vfat"
== END blkid ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.18-164.el5
kernel-devel-2.6.18-164.el5
kernel-headers-2.6.18-164.el5
== END rpm -qa kernel\* | sort ==

== BEGIN lspci ==
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX] (rev a2)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
== END lspci ==

== BEGIN lspci -n ==
00:00.0 0600: 8086:29e0 (rev 01)
00:01.0 0604: 8086:29e1 (rev 01)
00:1a.0 0c03: 8086:2937 (rev 02)
00:1a.1 0c03: 8086:2938 (rev 02)
00:1a.2 0c03: 8086:2939 (rev 02)
00:1a.7 0c03: 8086:293c (rev 02)
00:1b.0 0403: 8086:293e (rev 02)
00:1c.0 0604: 8086:2940 (rev 02)
00:1c.4 0604: 8086:2948 (rev 02)
00:1c.5 0604: 8086:294a (rev 02)
00:1d.0 0c03: 8086:2934 (rev 02)
00:1d.1 0c03: 8086:2935 (rev 02)
00:1d.2 0c03: 8086:2936 (rev 02)
00:1d.7 0c03: 8086:293a (rev 02)
00:1e.0 0604: 8086:244e (rev 92)
00:1f.0 0601: 8086:2916 (rev 02)
00:1f.2 0101: 8086:2920 (rev 02)
00:1f.3 0c05: 8086:2930 (rev 02)
00:1f.5 0101: 8086:2926 (rev 02)
01:00.0 0300: 10de:0612 (rev a2)
02:00.0 0200: 11ab:4364 (rev 12)
03:00.0 0101: 11ab:6121 (rev b2)
== END lspci -n ==

== BEGIN ifconfig ==
eth0 Link encap:Ethernet Hardware Adresse xx:xx:xx:xx:xx:xx
inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0
inet6 Adresse: fe80::92e6:baff:fe64:5d1f/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:4213 (4.1 KiB) TX bytes:5999 (5.8 KiB)
Interrupt:177

lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:760 (760.0 b) TX bytes:760 (760.0 b)

== END ifconfig ==

== BEGIN route -n ==
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth0
== END route -n ==

== BEGIN cat /etc/resolv.conf ==
nameserver 194.150.168.168
nameserver 195.202.32.79
nameserver 8.8.4.4
== END cat /etc/resolv.conf ==

== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==

== BEGIN chkconfig --list | grep -i network ==
NetworkManager 0:Aus 1:Aus 2:Aus 3:Aus 4:Aus 5:Aus 6:Aus
network 0:Aus 1:Aus 2:Ein 3:Ein 4:Ein 5:Ein 6:Aus
== END chkconfig --list | grep -i network ==

User avatar
AlanBartlett
Forum Moderator
Posts: 9320
Joined: 2007/10/22 11:30:09
Location: ~/Earth/UK/England/Suffolk
Contact:

Re: cdrom mount ->system freeze

Post by AlanBartlett » 2010/05/04 15:19:27

Whilst waiting for [b]Phil[/b] to reply, I'll make a comment that I notice you are not running the latest kernel.

My advice is to update the kernel ([b]yum update kernel\*[/b]) to the current version (which is [i]2.6.18-164-15.1.el5[/i], as of the date of this post), re-boot the system and test again.

If you would like to see the changes made since the base 5.4 kernel that you are running, you can see the deltas of each successive change log [url=http://www.centos.toracat.org/ajb/kernel-clog-diff/]here[/url]. Numbers 34 to 39 will be the ones relevant to your situation.

tenim
Posts: 3
Joined: 2010/05/03 06:37:06

Re: cdrom mount ->system freeze

Post by tenim » 2010/05/06 06:32:31

have updated my kernel to 2.6.18-164-15.1
after rebooting the same thing: mounting cdrom ->freeze.

now, i mount a .iso -image per loop to access the data. this works but is not comfortable.

Post Reply