Code: Select all
virt-install --name ponos --ram 8192 --vcpus=6 --os-variant=rhel7 --accelerate -v -w bridge:coreblue,mac=00:1d:55:31:40:b7 --disk path=/dev/misc2vg/ponosos --location nfs:10.0.107.1:/install/centos-7.4-x86_64 --initrd-inject='/var/tmp/ks' --nographics -x "ip=10.0.72.1::10.0.107.1:255.255.0.0:ponos.ds.digitalsafe.net:eth0:none console=ttyS0 inst.headless inst.text inst.sshd inst.repo=nfs:10.0.107.1:/install/centos-7.4-x86_64 inst.ks=/ks serial inst.text console=ttyS0" --force --autostart --noautoconsole
Code: Select all
# virsh console ponos
Connected to domain ponos
Escape character is ^]
[ 3.410729] Freeing initrd memory: 47304k freed
[ 3.428202] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.428911] software IO TLB [mem 0xbbff7000-0xbfff7000] (64MB) mapped at [ffff8800bbff7000-ffff8800bfff6fff]
[ 3.431560] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 3.432296] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 3.433440] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 3.434040] Initialise system trusted keyring
[ 3.434475] audit: initializing netlink socket (disabled)
[ 3.434979] type=2000 audit(1522460398.203:1): initialized
[ 3.452332] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.453888] zpool: loaded
[ 3.454185] zbud: loaded
[ 3.454567] VFS: Disk quotas dquot_6.5.2
[ 3.454982] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.455817] msgmni has been set to 15963
[ 3.456253] Key type big_key registered
[ 3.458203] NET: Registered protocol family 38
[ 3.458638] Key type asymmetric registered
[ 3.459018] Asymmetric key parser 'x509' registered
[ 3.459509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.460292] io scheduler noop registered
[ 3.460673] io scheduler deadline registered (default)
[ 3.461175] io scheduler cfq registered
[ 3.461663] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.462189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.462925] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.463626] ACPI: Power Button [PWRF]
[ 3.464151] GHES: HEST is not enabled!
[ 3.464651] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.486782] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.487942] Non-volatile memory driver v1.3
[ 3.488450] Linux agpgart interface v0.103
[ 3.488981] crash memory driver: version 1.1
[ 3.489454] rdac: device handler registered
[ 3.489943] hp_sw: device handler registered
[ 3.490359] emc: device handler registered
[ 3.490740] alua: device handler registered
[ 3.491160] libphy: Fixed MDIO Bus: probed
[ 3.491672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.492287] ehci-pci: EHCI PCI platform driver
[ 3.493443] ehci-pci 0000:00:04.7: EHCI Host Controller
[ 3.494049] ehci-pci 0000:00:04.7: new USB bus registered, assigned bus number 1
[ 3.494911] ehci-pci 0000:00:04.7: irq 11, io mem 0xfebc1000
[ 3.501206] ehci-pci 0000:00:04.7: USB 2.0 started, EHCI 1.00
[ 3.501830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.502502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.503159] usb usb1: Product: EHCI Host Controller
[ 3.503624] usb usb1: Manufacturer: Linux 3.10.0-693.el7.x86_64 ehci_hcd
[ 3.504241] usb usb1: SerialNumber: 0000:00:04.7
[ 3.505070] hub 1-0:1.0: USB hub found
[ 3.505464] hub 1-0:1.0: 6 ports detected
[ 3.505972] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.506560] ohci-pci: OHCI PCI platform driver
[ 3.506992] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.508268] uhci_hcd 0000:00:04.0: UHCI Host Controller
[ 3.508878] uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 3.509599] uhci_hcd 0000:00:04.0: detected 2 ports
[ 3.510091] uhci_hcd 0000:00:04.0: irq 11, io base 0x0000c060
[ 3.510681] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.511336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.512062] usb usb2: Product: UHCI Host Controller
[ 3.512516] usb usb2: Manufacturer: Linux 3.10.0-693.el7.x86_64 uhci_hcd
[ 3.513222] usb usb2: SerialNumber: 0000:00:04.0
[ 3.513827] hub 2-0:1.0: USB hub found
[ 3.514496] hub 2-0:1.0: 2 ports detected
[ 3.515743] uhci_hcd 0000:00:04.1: UHCI Host Controller
[ 3.516427] uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
[ 3.517228] uhci_hcd 0000:00:04.1: detected 2 ports
[ 3.517744] uhci_hcd 0000:00:04.1: irq 10, io base 0x0000c080
[ 3.518422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.519039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.519845] usb usb3: Product: UHCI Host Controller
[ 3.520309] usb usb3: Manufacturer: Linux 3.10.0-693.el7.x86_64 uhci_hcd
[ 3.520998] usb usb3: SerialNumber: 0000:00:04.1
[ 3.521631] hub 3-0:1.0: USB hub found
[ 3.522028] hub 3-0:1.0: 2 ports detected
[ 3.523510] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 3.524174] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 4
[ 3.524974] uhci_hcd 0000:00:04.2: detected 2 ports
[ 3.525738] uhci_hcd 0000:00:04.2: irq 10, io base 0x0000c0a0
[ 3.526365] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.527096] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.528105] usb usb4: Product: UHCI Host Controller
[ 3.528619] usb usb4: Manufacturer: Linux 3.10.0-693.el7.x86_64 uhci_hcd
[ 3.529318] usb usb4: SerialNumber: 0000:00:04.2
[ 3.529941] hub 4-0:1.0: USB hub found
[ 3.530359] hub 4-0:1.0: 2 ports detected
[ 3.530883] usbcore: registered new interface driver usbserial
[ 3.531535] usbcore: registered new interface driver usbserial_generic
[ 3.532221] usbserial: USB Serial support registered for generic
[ 3.532909] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.534287] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.534793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.535482] mousedev: PS/2 mouse device common for all mice
[ 3.536384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.537798] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2
[ 3.538783] rtc_cmos 00:00: RTC can wake from S4
[ 3.539520] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[ 3.540636] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 3.541353] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram
[ 3.542015] cpuidle: using governor menu
[ 3.542520] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.543160] usbcore: registered new interface driver usbhid
[ 3.543763] usbhid: USB HID core driver
[ 3.544191] drop_monitor: Initializing network drop monitor service
[ 3.544926] TCP: cubic registered
[ 3.545553] Initializing XFRM netlink socket
[ 3.546046] NET: Registered protocol family 10
[ 3.546748] NET: Registered protocol family 17
[ 3.547478] microcode: CPU0 sig=0x306c1, pf=0x1, revision=0x1
[ 3.548161] microcode: CPU1 sig=0x306c1, pf=0x1, revision=0x1
[ 3.550055] microcode: CPU2 sig=0x306c1, pf=0x1, revision=0x1
[ 3.552004] microcode: CPU3 sig=0x306c1, pf=0x1, revision=0x1
[ 3.553963] microcode: CPU4 sig=0x306c1, pf=0x1, revision=0x1
[ 3.555859] microcode: CPU5 sig=0x306c1, pf=0x1, revision=0x1
[ 3.557943] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.559095] Loading compiled-in X.509 certificates
[ 3.559635] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[ 3.560738] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[ 3.562104] Loaded X.509 cert 'CentOS Linux kernel signing key: da187dca7dbe53ab05bd13bd0c4e21f422b6a49c'
[ 3.563185] registered taskstats version 1
[ 3.568796] Key type trusted registered
[ 3.573153] Key type encrypted registered
[ 3.577323] IMA: No TPM chip found, activating TPM-bypass!
[ 3.578220] Magic number: 10:546:661
[ 3.578876] rtc_cmos 00:00: setting system clock to 2018-03-31 01:39:58 UTC (1522460398)
[ 3.580511] Freeing unused kernel memory: 1764k freed
[ 3.587123] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.590789] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.593080] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.595974] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.601687] systemd[1]: Detected virtualization kvm.
[ 3.603254] systemd[1]: Detected architecture x86-64.
[ 3.604793] systemd[1]: Running in initial RAM disk.
Welcome to CentOS Linux 7 (Core) dracut-033-502.el7 (Initramfs)!
[ 3.607950] systemd[1]: No hostname configured.
[ 3.608512] systemd[1]: Set hostname to <localhost>.
[ 3.609037] systemd[1]: Initializing machine ID from KVM UUID.
[ 3.613938] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[ 3.644476] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.645801] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.646698] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.647452] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.648581] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.649376] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.652595] systemd[1]: Cannot add dependency job for unit blk-availability.service, ignoring: Unit not found.
[ OK ] Reached target Timers.
[ 3.654534] systemd[1]: Reached target Timers.
[ 3.655051] systemd[1]: Starting Timers.
[ OK ] Created slice Root Slice.
[ 3.656325] systemd[1]: Created slice Root Slice.
[ 3.656809] systemd[1]: Starting Root Slice.
[ OK ] Listening on udev Control Socket.
[ 3.658039] systemd[1]: Listening on udev Control Socket.
[ 3.658662] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on Journal Socket.
[ 3.659897] systemd[1]: Listening on Journal Socket.
[ 3.660460] systemd[1]: Starting Journal Socket.
[ OK ] Created slice System Slice.
[ 3.661694] systemd[1]: Created slice System Slice.
[ 3.662266] systemd[1]: Starting System Slice.
[ 3.663073] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 3.664628] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 3.667211] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ OK ] Reached target Swap.
[ 3.669029] systemd[1]: Reached target Swap.
[ 3.669499] systemd[1]: Starting Swap.
[ 3.669897] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 3.673351] systemd[1]: Starting dracut cmdline hook...
Starting dracut cmdline hook...
[ OK ] Reached target Slices.
[ 3.675143] systemd[1]: Reached target Slices.
[ 3.675613] systemd[1]: Starting Slices.
[ OK ] Listening on udev Kernel Socket.
[ 3.676719] systemd[1]: Listening on udev Kernel Socket.
[ 3.677302] systemd[1]: Starting udev Kernel Socket.
[ OK ] Reached target Local File Systems.
[ 3.678508] systemd[1]: Reached target Local File Systems.
[ 3.679043] systemd[1]: Starting Local File Systems.
[ OK ] Reached target Encrypted Volumes.
[ 3.680276] systemd[1]: Reached target Encrypted Volumes.
[ 3.680807] systemd[1]: Starting Encrypted Volumes.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 3.682572] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Setup Virtual Console.
[ 3.684493] systemd[1]: Started Setup Virtual Console.
[ OK ] Started Apply Kernel Variables.
[ 3.686261] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Journal Service.
[ 3.687522] systemd[1]: Started Journal Service.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ 3.799834] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 3.807273] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.541174] dracut-cmdline[112]: Warning: 'serial' is deprecated and has been removed.
[ 3.542678] dracut-cmdline[112]: Warning: To change the console use 'console=' instead.
[ 3.553966] dracut-cmdline[112]: Warning: 'method=' is deprecated. Using 'repo=nfs:10.0.107.1:/install/centos-7.4-x86_64' instead.
[ 3.928872] random: fast init done
[ 3.929723] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 3.930679] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 3.931804] usb 1-1: Product: QEMU USB Tablet
[ 3.932424] usb 1-1: Manufacturer: QEMU
[ 3.932943] usb 1-1: SerialNumber: 42
[ 3.936006] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:04.7/usb1/1-1/1-1:1.0/input/input4
[ 3.937645] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:04.7-1/input0
[ OK ] Started dracut cmdline hook.
Starting dracut pre-udev hook...
[ 4.230812] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.245875] Loading iSCSI transport class v2.0-870.
[ 4.260507] iscsi: registered transport (tcp)
[ 4.317205] FDC 0 is a S82078B
[ 4.326166] No iBFT detected.
[ 4.341554] async_tx: api initialized (async)
[ 4.344605] xor: automatically using best checksumming function:
[ 4.355190] avx : 18736.000 MB/sec
[ 4.386192] raid6: sse2x1 gen() 6417 MB/s
[ 4.403184] raid6: sse2x2 gen() 9136 MB/s
[ 4.420184] raid6: sse2x4 gen() 10667 MB/s
[ 4.437184] raid6: avx2x1 gen() 15175 MB/s
[ 4.454183] raid6: avx2x2 gen() 18539 MB/s
[ 4.471184] raid6: avx2x4 gen() 22363 MB/s
[ 4.471737] raid6: using algorithm avx2x4 gen() (22363 MB/s)
[ 4.472436] raid6: using avx2x2 recovery algorithm
[ 4.516331] device-mapper: uevent: version 1.0.3
[ 4.517841] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 4.555593] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 4.575142] alg: No test for __sha256-mb (__intel_sha256-mb)
[ 4.579104] alg: No test for __sha256-mb (mcryptd(__intel_sha256-mb))
[ 4.638595] RPC: Registered named UNIX socket transport module.
[ 4.639485] RPC: Registered udp transport module.
[ 4.640071] RPC: Registered tcp transport module.
[ 4.640680] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ OK ] Started dracut pre-udev hook.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
Starting Show Plymouth Boot Screen...
[ 5.034262] virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
[ 5.038996] virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver
Starting Device-Mapper Multipath Device Controller...
[ 5.046757] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
[ 5.052834] AES CTR mode by8 optimization enabled
[ 5.053397] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[ 5.067068] scsi host0: ata_piix
[ 5.068686] scsi host1: ata_piix
[ 5.070027] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
[ 5.070501] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ OK ] Started Device[ 5.072886] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
-Mapper Multipath Device Controller.
Starting Open-iSCSI...
G[ OK ] Started Open-iSCSI.
Starting dracut initqueue hook...
[ 5.102221] alg: No test for crc32 (crc32-pclmul)
[ 5.113227] 8021q: 802.1Q VLAN Support v1.8
[ 5.204287] 8021q: adding VLAN 0 to HW filter on device eth0
[ 4.899304] dracut-initqueue[633]: RTNETLINK answers: Network is unreachable
[ 6.974860] dracut-initqueue[633]: Warning: unknown network kickstart URL: /ks
[ 7.330326] FS-Cache: Loaded
[ 7.372533] FS-Cache: Netfs 'nfs' registered for caching
[ 7.103733] dracut-initqueue[633]: Warning: no suitable images
[ 132.642271] dracut-initqueue[633]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 133.174143] dracut-initqueue[633]: Warning: dracut-initqueue timeout - starting timeout scripts
...
...
...
[ 194.607937] dracut-initqueue[633]: Warning: Could not boot.
Starting Device-Mapper Multipath Device Controller...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
[ OK ] Started Device-Mapper Multipath Device Controller.
Starting Open-iSCSI...
G[ OK ] Started Open-iSCSI.
Starting dracut initqueue hook...
[ 4.899304] dracut-initqueue[633]: RTNETLINK answers: Network is unreachable
[ 6.974860] dracut-initqueue[633]: Warning: unknown network kickstart URL: /ks
[ 7.103733] dracut-initqueue[633]: Warning: no suitable images
[ 132.642271] dracut-initqueue[633]: Warning: dracut-initqueue timeout - starting timeout scripts
...
...
...
[ 194.607583] dracut-initqueue[633]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 194.607937] dracut-initqueue[633]: Warning: Could not boot.
[ 194.747592] dracut-initqueue[633]: Warning: /dev/root does not exist
Starting Dracut EmergenWarning: /dev/root does not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.
Code: Select all
dracut:/# ping 10.0.107.1
PING 10.0.107.1 (10.0.107.1) 56(84) bytes of data.
64 bytes from 10.0.107.1: icmp_seq=1 ttl=64 time=0.411 ms
64 bytes from 10.0.107.1: icmp_seq=2 ttl=64 time=0.268 ms
64 bytes from 10.0.107.1: icmp_seq=3 ttl=64 time=0.259 ms
^C
--- 10.0.107.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 0.259/0.312/0.411/0.072 ms
Any help is appreciated.
