exportfs and virsh hang on CentOS 7.5 kernel 3.10.0-862.x

General support questions
Post Reply
Ben_Stanley
Posts: 1
Joined: 2018/06/18 02:33:51

exportfs and virsh hang on CentOS 7.5 kernel 3.10.0-862.x

Post by Ben_Stanley » 2018/06/18 16:20:25

I'm having trouble with the Cents 7.5 kernels 3.10.0-862.x

I'm having the following problems that I have noticed so far:
* exportfs hangs
* virsh list hangs

I have been able to work around these problems by downgrading my kernel to 3.10.0-693.21.1.
When I downgrade, the problems disappear and everything works as expected.

Please find below the getinfo output for the two configurations tested.

getinfo 3.10.0-693.21.1.el7.x86_64 works
https://pastebin.com/yaEZTjSS

getinfo 3.10.0-862.3.3.el7.x86_64 fails
https://pastebin.com/xgNgnQDH

Also /var/log/messages for each kernel

/var/log/messages for boot 3.10.0-693.21.1.el7.x86_64 works
https://pastebin.com/JaBnJJef

/var/log/messages for boot 3.10.0-862.3.3.el7.x86_64 fails
https://pastebin.com/H77DuxXh

Could I please get some help to troubleshoot what is going on with the newer kernel, as staying with the old kernel is not a good solution!

Thanks,
Ben.

User avatar
TrevorH
Forum Moderator
Posts: 23879
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: exportfs and virsh hang on CentOS 7.5 kernel 3.10.0-862.x

Post by TrevorH » 2018/06/18 17:23:58

These are not generic problems that happen to everyone. I've just run exportfs -ra on my system here which is using 3.10.0-862.3.2.el7.x86_64 and it was fine. I also have a pair of machines at work that are running 7.5 and those are VM hosts pretty much exclusively managed using virsh and I've not seen problems there either.

I don't see anything useful in any of the output you've provided so far, sorry. Did you try using strace to attach to the hung process?
CentOS 5 died in March 2017 - migrate NOW!
Full time Geek, part time moderator. Use the FAQ Luke

Post Reply