I have a centOS7 physical host, and installed KVM, Qemu, libvirt, all that. I have downloaded the centos7 dvd iso, and when creating a brand new VM and tyring to boot off that iso (attached as dvd drive) all I get is a black screen. I have tried the dvd and the everything .iso, and switched the video from cirrus to vga.
I have confirmed other VMs screens work without issue. Ubuntu installer, another VM I have I moved over, and even the centOS 6 ISO! Its only centos7 with the issue. I also tried using vnc to connect directly to the VM, same thing black screen. Sending ctrl alt f1-through 12 does nothing.
Im wondering if this has something to do with boot mode. When I installed centos7 on the physical host, I was selecting my USB drive with the image in bios to boot... then would select centOS and just get a kernel panic output. It only worked when I selected my USB drive with the (EFI) label next to it, then the slection screen looked a little different but worked.
My Physical host info can be found here: https://pastebin.com/ZcmZ2TWb
The XML for the current VM is here:
Edit: The XML below did not have the .iso attached, it detachtes I guess after the first power down. However that was not the issue I found the issue. The screen is blank if I give any more than 1 cpu to the vm, So I guess my question is why would that be? Going to install and see if I cna increase it later.
Code: Select all
<domain type='qemu'>
<name>centos7.0</name>
<uuid>39a19eff-3367-4b05-8b35-73f555d0c874</uuid>
<memory unit='KiB'>4194304</memory>
<currentMemory unit='KiB'>4194304</currentMemory>
<vcpu placement='static'>4</vcpu>
<os>
<type arch='x86_64' machine='pc-i440fx-rhel7.0.0'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
</features>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/libexec/qemu-kvm</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/var/lib/libvirt/images/centos7.0-1.qcow2'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'/>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</controller>
<interface type='direct'>
<mac address='52:54:00:27:9a:1e'/>
<source dev='enp31s0' mode='bridge'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<serial type='pty'>
<target type='isa-serial' port='0'>
<model name='isa-serial'/>
</target>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<channel type='unix'>
<target type='virtio' name='org.qemu.guest_agent.0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='tablet' bus='usb'>
<address type='usb' bus='0' port='1'/>
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes'>
<listen type='address'/>
</graphics>
<video>
<model type='cirrus' vram='16384' heads='1' primary='yes'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</memballoon>
</devices>
</domain>
CentOS 6.0 works right away. Would it be best to install that and upgrade? I thought upgrading centOS meant just re-imaging anyway but not sure.