brother HL-3170CDW print drivers

[kissellj]

I've used the following printer driver for a brother HL-3170CDW installed on a new install of CentOS7 x86_64. I've downloaded the drivers from the brother website. I did not get any errors on the install. It doesn't print or wake the printer. I get a message saying it sent the document to the printer. I used these same drivers on CentOS6 and the printer worked well. Any help troubleshooting this would be greatly appreciated.

http://support.brother.com/g/b/download ... all&os=127

HL 3170CDW Printer setup
install from above site
Command (for rpm) : rpm -ihv --nodeps (lpr-drivername)
hl3170cdwlpr-1.1.2-1.i386.rpm
Command (for rpm) : rpm -ihv --nodeps (cupswrapper-drivername)
hl3170cdwcupswrapper-1.1.2-1.i386
Goto System=>Administration=>Printing
Right click on the printer and goto Printer Properties
In the Device URI click the change button
"LPD/LPR Host or Printer" for Device
lpd://(Your printer's IP address)/binary_p1 for Device URI
192.168.0.237
Hit the probe button and should set the printer up.