Can't install vestacp repo problem

Issues related to applications and software problems
Post Reply
pycckuu4ejl
Posts: 2
Joined: 2018/05/11 01:21:39

Can't install vestacp repo problem

Post by pycckuu4ejl » 2018/05/11 01:26:21

Hello guys. Thank you for checking my problem out!
I'm currently trying to install vestaCP (control panel) and i faced problem bellow.
I went to http://vault.centos.org/7.4.1708/os/x86 ... repomd.xml using my browser and it in fact leads to error 404.
I also dug into file tree and noticed that there's no /x86_64/ on resource only /Source/ for this version.
How would I go about fixing this.
Thank you in advance.

Code: Select all

http://vault.centos.org/7.4.1708/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article

https://wiki.centos.org/yum-errors

If above article doesn't help to resolve this issue please use https://bugs.centos.org/.



 One of the configured repositories failed (CentOS-7.4.1708 - Base),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=C7.4.1708-base ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable C7.4.1708-base
        or
            subscription-manager repos --disable=C7.4.1708-base

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=C7.4.1708-base.skip_if_unavailable=true

failure: repodata/repomd.xml from C7.4.1708-base: [Errno 256] No more mirrors to try.
http://vault.centos.org/7.4.1708/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Error: yum install failed

User avatar
avij
Forum Moderator
Posts: 2618
Joined: 2010/12/01 19:25:52
Location: Helsinki, Finland
Contact:

Re: Can't install vestacp repo problem

Post by avij » 2018/05/11 05:09:56

Don't use vault for installing software. The content you are looking for is on mirror.centos.org and on the 600+ public mirrors.

pycckuu4ejl
Posts: 2
Joined: 2018/05/11 01:21:39

Re: Can't install vestacp repo problem

Post by pycckuu4ejl » 2018/05/11 21:45:32

My current /etc/yum.repos.d/CentOS-Base.repo looks like this
I put enabled for base and updates "enabled=1"
But for some reason it is still trying to fetch stuff from vault. How would I fix that.
I also did this to no avail
yum clean all
yum makecache
yum update

Code: Select all

[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

Post Reply