I am new to freeIPA, and now I decided to integrated my Radius Authentication with FreeIPA users ,
I was install freeipa on Centos 7 ( build 1804 ) using via link below
https://www.freeipa.org/page/Using_Free ... S/RedHat_7
but I have problem with authentication via freeradius , with the flowing error !
anyone can help me , I think my problem with the method of Auth-Type :- ldap but I don;t know how Can I solved it ,(1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password is available
(1) [pap] = noop
(1) } # authorize = ok
(1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(1) Failed to authenticate the user
the full log is here
Code: Select all
Ready to process requests
(1) Received Access-Request Id 160 from 1.0.0.147:45147 to 1.0.0.147:1812 length 84
(1) User-Name = "test@local.lan"
(1) User-Password = "test"
(1) NAS-IP-Address = 1.0.0.147
(1) NAS-Port = 1812
(1) Message-Authenticator = 0x6ff3dfd968d55854262a16007b8550e9
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "local.lan" for User-Name = "test@local.lan"
(1) suffix: No such realm "local.lan"
(1) [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
(1) [files] = noop
rlm_ldap (ldap): Reserved connection (5)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (uid=test@local.lan)
(1) ldap: Performing search in "dc=local,dc=lan" with filter "(uid=test@local.lan)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: Search returned no results
rlm_ldap (ldap): Released connection (5)
Need 1 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (7), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://ipa.local.lan:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1) [ldap] = notfound
(1) if ((ok || updated) && User-Password) {
(1) if ((ok || updated) && User-Password) -> FALSE
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password is available
(1) [pap] = noop
(1) } # authorize = ok
(1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject: --> test@local.lan
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1) [attr_filter.access_reject] = updated
(1) [eap] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 160 from 1.0.0.147:1812 to 1.0.0.147:45147 length 20
Waking up in 3.9 seconds.
(1) Cleaning up request packet ID 160 with timestamp +117
Ready to process requests