Hi Sir,
Hese is my situation:
Install CentOS 7.6 => Failed (See 8 Penguins and shutdown)
Install CentOS 7.6 with acpi=off -> Failed (hang blank screen)
Install CentOS 7.5 -> Failed (See 8 Penguins and shutdown)
Install CentOS 7.5 with acpi=off -> PASS !!!!!!!!!
I'd like to install CentOS successfully. What could I try?
What's related modification from 7.5 to 7.6 ?
Thank you.
CentOS 7.6 Installation Failed
Re: CentOS 7.6 Installation Failed
Further Information:
Install CentOS 7.6 with acpi=off and get :
Kernel panic - not syncing:Fatal exception (P18)
acpi_get_hp_hw_control_from_firmware+0x95/0x3b0
Install CentOS 7.6 with acpi=off and get :
Kernel panic - not syncing:Fatal exception (P18)
acpi_get_hp_hw_control_from_firmware+0x95/0x3b0
Re: CentOS 7.6 Installation Failed
If the install only works with acpi=off then check for BIOS updates.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: CentOS 7.6 Installation Failed
Thank you for reply.
If the install only works with acpi=off, what would be the possible root cause for BIOS? (I am BIOS a engineer solving this problem.)
And our CentOS 7.6 installation failed no matter acpi=off or not.
If the install only works with acpi=off, what would be the possible root cause for BIOS? (I am BIOS a engineer solving this problem.)
And our CentOS 7.6 installation failed no matter acpi=off or not.