gnome and vncserver -screen 1920x1200x32 color depth problem

Issues related to applications and software problems
Post Reply
ron7000
Posts: 103
Joined: 2019/01/15 20:00:28

gnome and vncserver -screen 1920x1200x32 color depth problem

Post by ron7000 » 2019/05/13 18:18:46

I like the old backgrounds from winxp: Win7-Red-1920x1200.jpg.
I made that as my desktop background in gnome.
When I remote in via vnc, if I type only vncserver then the color depth I think defaults to 8... whatever it's really grainy and ugly.

The partial solution is to do vncserver -screen scrn 1920x1200x32. And this is with tigervnc-server

I think this is no different than multiple arguments of -geometry 1920x1200 and -depth 32 ?

So if my background is the Win7-Red-1920x1200.jpg image, upon first log in via vnc it is still grainy.

However if I simply right click Change Background and reapply the pic then it's nice and crisp with 32 bit color depth as the desktop background displayed through vnc.
Is this a bug with gnome? Is there some setting in gnome to make the grainy 8 bit image not come through on first vnc connection?

here is everything that vncserver will spit out for options

Code: Select all

use: X [:<display>] [option]
-a #                   default pointer acceleration (factor)
-ac                    disable access control restrictions
-audit int             set audit trail level
-auth file             select authorization file
-br                    create root window with black background
+bs                    enable any backing store support
-bs                    disable any backing store support
-c                     turns off key-click
c #                    key-click volume (0-100)
-cc int                default color visual class
-nocursor              disable the cursor
-core                  generate core dump on fatal error
-displayfd fd          file descriptor to write display number to when ready to connect
-dpi int               screen resolution in dots per inch
-dpms                  disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f #                   bell base (0-100)
-fc string             cursor font
-fn string             default font name
-fp string             default font path
-help                  prints message with these options
+iglx                  Allow creating indirect GLX contexts
-iglx                  Prohibit creating indirect GLX contexts (default)
-I                     ignore all remaining arguments
-ld int                limit data space to N Kb
-lf int                limit number of open files to N
-ls int                limit stack space to N Kb
-nolock                disable the locking mechanism
-maxclients n          set maximum number of clients (power of two)
-nolisten string       don't listen on protocol
-listen string         listen on protocol
-noreset               don't reset after last client exists
-background [none]     create root window with no background
-reset                 reset after last client exists
-p #                   screen-saver pattern duration (minutes)
-pn                    accept failure to listen on all ports
-nopn                  reject failure to listen on all ports
-r                     turns off auto-repeat
r                      turns on auto-repeat
-render [default|mono|gray|color] set render color alloc policy
-retro                 start with classic stipple and cursor
-s #                   screen-saver timeout (minutes)
-seat string           seat to run on
-t #                   default pointer threshold (pixels/t)
-terminate             terminate at server reset
-to #                  connection time out
-tst                   disable testing extensions
ttyxx                  server started from init on /dev/ttyxx
v                      video blanking for screen-saver
-v                     screen-saver without video blanking
-wm                    WhenMapped default backing-store
-wr                    create root window with white background
-maxbigreqsize         set maximal bigrequest size
+xinerama              Enable XINERAMA extension
-xinerama              Disable XINERAMA extension
-dumbSched             Disable smart scheduling and threaded input, enable old behavior
-schedInterval int     Set scheduler interval in msec
-sigstop               Enable SIGSTOP based startup
+extension name        Enable extension
-extension name        Disable extension
-query host-name       contact named host for XDMCP
-broadcast             broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name    contact named host for indirect XDMCP
-port port-num         UDP port number to send messages to
-from local-address    specify the local address to connect from
-once                  Terminate server after one session
-class display-class   specify display class to send in manage
-cookie xdm-auth-bits  specify the magic cookie for XDMCP
-displayID display-id  manufacturer display ID for request
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
                       enable/disable accessx key sequences
-ardelay               set XKB autorepeat delay
-arinterval            set XKB autorepeat interval

Xvnc TigerVNC 1.8.0 - built Aug 31 2018 12:04:07
Copyright (C) 1999-2017 TigerVNC Team and many others (see README.txt)
See http://www.tigervnc.org for information on TigerVNC.
Underlying X server release 12001000, The X.Org Foundation

-screen scrn WxHxD     set screen's width, height, depth
-pixdepths list-of-int support given pixmap depths
+/-render                  turn on/off RENDER extension support(default on)
-linebias n            adjust thin line pixelization
-blackpixel n          pixel value for black
-whitepixel n          pixel value for white
-shmem                 put framebuffers in shared memory
-geometry WxH          set screen 0's width, height
-depth D               set screen 0's depth
-pixelformat fmt       set pixel format (rgbNNN or bgrNNN)
-inetd                 has been launched from inetd
-noclipboard           disable clipboard settings modification via vncconfig utility
-verbose [n]           verbose startup messages
-quiet                 minimal startup messages
-version               show the server version

VNC parameters:

Parameters can be turned on with -<param> or off with -<param>=0
Parameters which take a value can be specified as -<param> <value>
Other valid forms are <param>=<value> -<param>=<value> --<param>=<value>
Parameter names are case-insensitive.  The parameters are:

Global Parameters:
  ZlibLevel      - Zlib compression level (default=-1)
  ImprovedHextile - Use improved compression algorithm for Hextile encoding
                   which achieves better compression ratios by the cost of
                   using more CPU time (default=1)
  pam_service    - Alias for PAMService
  PAMService     - Service name for PAM password validation (default=vnc)
  PlainUsers     - Users permitted to access via Plain security type (including
                   TLSPlain, X509Plain etc.) (default=)
  GnuTLSPriority - GnuTLS priority string that controls the TLS session’s
                   handshake algorithms (default=NORMAL)
  MaxCutText     - Maximum permitted length of an incoming clipboard update
                   (default=262144)
  RemapKeys      - Comma-separated list of incoming keysyms to remap.  Mappings
                   are expressed as two hex values, prefixed by 0x, and
                   separated by -> (default=)
  BlacklistTimeout - The initial timeout applied when a host is first
                   black-listed.  The host cannot re-attempt a connection until
                   the timeout expires. (default=10)
  BlacklistThreshold - The number of unauthenticated connection attempts
                   allowed from any individual host before that host is
                   black-listed (default=5)
  QueryConnectTimeout - Number of seconds to show the Accept Connection dialog
                   before rejecting the connection (default=10)
  QueryConnect   - Prompt the local user to accept or reject incoming
                   connections. (default=0)
  AcceptSetDesktopSize - Accept set desktop size events from clients.
                   (default=1)
  SendCutText    - Send clipboard changes to clients. (default=1)
  AcceptCutText  - Accept clipboard updates from clients. (default=1)
  AcceptPointerEvents - Accept pointer press and release events from clients.
                   (default=1)
  AcceptKeyEvents - Accept key press and release events from clients.
                   (default=1)
  DisconnectClients - Disconnect existing clients if an incoming connection is
                   non-shared. If combined with NeverShared then new
                   connections will be refused while there is a client active
                   (default=1)
  NeverShared    - Never treat incoming connections as shared, regardless of
                   the client-specified setting (default=0)
  AlwaysShared   - Always treat incoming connections as shared, regardless of
                   the client-specified setting (default=0)
  Protocol3.3    - Always use protocol version 3.3 for backwards compatibility
                   with badly-behaved clients (default=0)
  FrameRate      - The maximum number of updates per second sent to each client
                   (default=60)
  CompareFB      - Perform pixel comparison on framebuffer to reduce
                   unnecessary updates (0: never, 1: always, 2: auto)
                   (default=2)
  ClientWaitTimeMillis - The number of milliseconds to wait for a client which
                   is no longer responding (default=20000)
  MaxIdleTime    - Terminate after s seconds of user inactivity (default=0)
  MaxConnectionTime - Terminate when a client has been connected for s seconds
                   (default=0)
  MaxDisconnectionTime - Terminate when no client has been connected for s
                   seconds (default=0)
  IdleTimeout    - The number of seconds after which an idle VNC connection
                   will be dropped (zero means no timeout) (default=0)
  Log            - Specifies which log output should be directed to which
                   target logger, and the level of output to log. Format is
                   <log>:<target>:<level>[, ...]. (default=)
  UseIPv6        - Use IPv6 for incoming and outgoing connections. (default=1)
  UseIPv4        - Use IPv4 for incoming and outgoing connections. (default=1)
  SendPrimary    - Send the PRIMARY as well as the CLIPBOARD selection
                   (default=1)
  SetPrimary     - Set the PRIMARY as well as the CLIPBOARD selection
                   (default=1)
  AllowOverride  - Comma separated list of parameters that can be modified
                   using VNC extension.
                   (default=desktop,AcceptPointerEvents,SendCutText,AcceptCutText,SendPrimary,SetPrimary)
  AvoidShiftNumLock - Avoid fake Shift presses for keys affected by NumLock.
                   (default=1)
  interface      - listen on the specified network address (default=all)
  localhost      - Only allow connections from localhost (default=0)
  desktop        - Name of VNC desktop (default=x11)
  rfbport        - TCP port to listen for RFB protocol (default=0)
  rfbwait        - Alias for ClientWaitTimeMillis
  httpPort       - TCP port to listen for HTTP (default=0)
  httpd          - Directory containing files to serve via HTTP (default=)
Server Parameters:
  X509Key        - Path to the key of the X509 certificate in PEM format
                   (default=)
  X509Cert       - Path to the X509 certificate in PEM format (default=)
  Password       - Obfuscated binary encoding of the password which clients
                   must supply to access the server (default=)
  rfbauth        - Alias for PasswordFile
  PasswordFile   - Password file for VNC authentication (default=)
  SecurityTypes  - Specify which security scheme to use (None, VncAuth, Plain,
                   TLSNone, TLSVnc, TLSPlain, X509None, X509Vnc, X509Plain)
                   (default=TLSVnc,VncAuth)
Attachments
Win7-Red-1920x1200.jpg
Win7-Red-1920x1200.jpg (85.13 KiB) Viewed 303 times

ron7000
Posts: 103
Joined: 2019/01/15 20:00:28

Re: gnome and vncserver -screen 1920x1200x32 color depth problem

Post by ron7000 » 2019/05/14 16:58:20

so it seems it's only upon first window opening of vncviewer into your session that the grainyness is there, if you do nothing.
open the applications menu and move mouse around in that but don't need to open anything,
in about 5-10 seconds the background will snap to full color depth on it's own.
Attachments
Untitled.jpg
Untitled.jpg (39.53 KiB) Viewed 281 times

Post Reply