Installing PAU09 on headless box

Issues related to hardware problems
rhanthony
Posts: 8
Joined: 2017/11/10 21:06:40

Re: Installing PAU09 on headless box

Postby rhanthony » 2017/11/14 18:04:48

I can see the device now in nmtui and configure a profile for my SSID. I've gotten it up and traffic flowing.

Code: Select all

wlp0s16f1u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.1.11  netmask 255.255.255.0  broadcast 10.0.1.255
        inet6 fe80::443a:1b57:f41f:4c19  prefixlen 64  scopeid 0x20<link>
        ether 9c:ef:d5:fe:b8:99  txqueuelen 1000  (Ethernet)
        RX packets 248094  bytes 17650627 (16.8 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 614610  bytes 933820360 (890.5 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


However it does not automatically connect if I reboot the machine. I added it to /etc/rc.modprobe so the card comes back on, but I can't get it to auto-connect to any SSID. Another issue though, not for the hardware forum I suppose.

Thanks for all your help!