I did a clean new installation and everything worked out the box, except the Qualcomm Gobi 2000 3G MiniPCI Express.
I followed the installation guide from http://www.thinkwiki.org/wiki/Qualcomm_Gobi_2000
The output from lsusb shows that the firmware is loaded successfully and that the modem is exposed over USB as id 05c6:9205.
Code: Select all
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 005: ID 17ef:4816 Lenovo Integrated Webcam
Bus 002 Device 005: ID 05c6:9205 Qualcomm, Inc.
Unfortunately the output from nmcli dev shows
Code: Select all
[root@localhost ~]# nmcli dev
GERÄT TYP STATUS VERBINDUNG
wlp2s0 wifi connected UPC011706
enp0s25 ethernet nicht verfügbar --
lo loopback nicht verwaltet --
no type of GSM as it should look like
Code: Select all
DEVICE TYPE STATE
wwan0 gsm disconnected
Code: Select all
Jan 15 14:16:45 localhost kernel: usb 2-1.4: Manufacturer: Qualcomm Incorporated
Jan 15 13:16:49 localhost kernel: usbserial: USB Serial support registered for Qualcomm USB modem
Jan 15 13:16:49 localhost kernel: qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
Jan 15 13:16:49 localhost kernel: usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
Jan 15 13:16:52 localhost kernel: qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
Jan 15 13:16:53 localhost kernel: usb 2-1.4: Product: Qualcomm Gobi 2000
Jan 15 13:16:53 localhost kernel: usb 2-1.4: Manufacturer: Qualcomm Incorporated
Jan 15 13:16:53 localhost kernel: qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
Jan 15 13:16:53 localhost kernel: usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
Jan 15 13:16:53 localhost kernel: qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
Jan 15 13:16:53 localhost kernel: usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
Jan 15 13:16:53 localhost kernel: qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
Jan 15 13:16:53 localhost kernel: usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
Code: Select all
Jan 15 13:16:48 localhost ModemManager[685]: <info> ModemManager (version 1.1.0-6.git20130913.el7) starting...
Jan 15 13:16:50 localhost NetworkManager[888]: <info> ModemManager available in the bus
Jan 15 13:16:50 localhost ModemManager[685]: <warn> (ttyUSB0): port attributes not fully set
Jan 15 13:16:50 localhost ModemManager[685]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
Jan 15 13:16:50 localhost ModemManager[685]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0': not supported by any plugin
Jan 15 13:16:52 localhost ModemManager[685]: <warn> (ttyUSB0) could not open serial device (2)
Jan 15 13:16:52 localhost ModemManager[685]: <warn> (Plugin Manager) (Generic) [ttyUSB0] error when checking support: '(tty/ttyUSB0) failed to open port: Could not open serial device ttyUSB0: No such file or directory'
Jan 15 13:16:52 localhost ModemManager[685]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4': not supported by any plugin
Jan 15 13:16:54 localhost ModemManager[685]: <warn> (ttyUSB0): port attributes not fully set
Jan 15 13:16:54 localhost ModemManager[685]: <warn> (ttyUSB1): port attributes not fully set
Jan 15 13:16:54 localhost ModemManager[685]: <warn> (ttyUSB2): port attributes not fully set
Jan 15 13:17:04 localhost ModemManager[685]: <info> Creating modem with plugin 'Generic' and '1' ports
Jan 15 13:17:04 localhost ModemManager[685]: <warn> Could not grab port (tty/ttyS0): 'Cannot add port 'tty/ttyS0', unhandled serial type'
Jan 15 13:17:04 localhost ModemManager[685]: <warn> Couldn't create modem for device at '/sys/devices/pci0000:00/0000:00:16.3': Failed to find primary AT port
Jan 15 13:17:10 localhost ModemManager[685]: <info> Creating modem with plugin 'Gobi' and '5' ports
Jan 15 13:17:10 localhost ModemManager[685]: <warn> Could not grab port (tty/ttyUSB2): 'Cannot add port 'tty/ttyUSB2', unhandled serial type'
Jan 15 13:17:10 localhost ModemManager[685]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4' successfully created
Jan 15 13:17:10 localhost ModemManager[685]: <warn> (ttyUSB1): port attributes not fully set
Jan 15 13:17:11 localhost ModemManager[685]: <warn> couldn't load Supported Bands: 'QMI operation failed: Cannot send message: QMI service 'dms' version '1.3' required, got version '1.1''
Jan 15 13:17:11 localhost ModemManager[685]: <warn> Modem couldn't be initialized: Couldn't check unlock status: Couldn't get PIN status: QMI protocol error (3): 'Internal'
Jan 15 13:17:11 localhost ModemManager[685]: <info> Modem: state changed (unknown -> failed)
The 3G Modem is working normally under Debian and Windows 7, so there is no hardware defect.