Page 2 of 2
Re: CentOS 7 and HP G60 Network Cards
Posted: 2017/09/11 06:17:35
by TrevorH
Definitely worth install the ELRepo repo as you have a package from there installed now and then it will update when you run yum update. Your wireless card may also have drivers there too but you'd need to use their guide to find out which one based on the pci vendor/device id pair.
Re: CentOS 7 and HP G60 Network Cards
Posted: 2017/09/11 11:57:25
by Datsys
Thanks very much everyone, I really appreciate the help.
Re: CentOS 7 and HP G60 Network Cards
Posted: 2019/04/08 17:16:15
by SRCM.CH
Hi,
I have a HP G60 445 DX laptop and I am facing the same issue.
I just wiped/formatted my hard disk and installed Cent OS 7 (minimal) version. While installing, during the network setup, I did not get any devices listed to select the network interface. I simply entered the hostname and continued. The setup completed smoothly and I did not errors. After logging in as root I noticed that except loopback nothing is listed while I query for
ip a. I tried running
lspci but I get
lspci command not found.
I went ahead and download ElRepo rpm
elrepo-release-7.0-3.el7.elrepo.noarch.rpm. It installed successfully. The I tried to install
kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64.rpm but it complained that I do not have all the dependencies.
Code: Select all
...
Error: Package: kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64 (/kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64)
Requires: kernel(napi_schedule_prep) = 0xa3aadec9
Error: Package: kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64 (/kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64)
Requires: kernel(alloc_etherdev_mqs_rh) = 0xa0bc067d
Error: Package: kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64 (/kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64)
Requires: kernel(__x86_indirect_thunk_r10) = 0x7e526bfa
Error: Package: kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64 (/kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64)
Requires: kernel(sme_me_mask) = 0x17fbce60
Error: Package: kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64 (/kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64)
Requires: kernel(__x86_indirect_thunk_r9) = 0xdf566a59
Error: Package: kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64 (/kmod-forcedeth-0.64-3.el7_5.elrepo.x86_64)
Requires: kernel >=3.10.0-862.el7
Installed: kernel-3.10.0-693.el7.x86_64 (@anaconda)
kernel = 3.10.0-693.el7
Re: CentOS 7 and HP G60 Network Cards
Posted: 2019/04/09 05:39:03
by toracat
That elrepo package requires at least the kernel from CentOS 7.5. Your kernel (3.10.0-693.el7) seems to be from CentOS 7.4.