Broadcom WIFI install on CentOS7
Posted: 2017/04/19 12:39:18
Hello All,
Linux semi-newb. Trying to learn and installed CentOS7 on my HP Pavilion 500 Desktop.
Trying to complete my wireless card driver install https://wiki.centos.org/HowTos/Laptops/ ... s/Broadcom
Basically stuck at step 3a in above link.
[root@localhost 3.10.0-514.10.2.el7.x86_64]# lspci -nn | grep Broadcom
03:00.0 Network controller [0280]: Broadcom Limited BCM43228 802.11a/b/g/n [14e4:4359]
Downloaded and unzipped appropriate driver.
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ pwd
/usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ ls
built-in.o lib Makefile src
[root@localhost modules]# pwd
/lib/modules
[root@localhost modules]# ls (NOT SURE BELOW WHICH ONE TO USE , TRYING THE FIRST)
3.10.0-514.10.2.el7.x86_64 3.10.0-514.el7.x86_64
*** I am not really sure how to run step 3a. I have run it from both directories and get the below:
[root@localhost 3.10.0-514.10.2.el7.x86_64]# pwd
/lib/modules/3.10.0-514.10.2.el7.x86_64
[root@localhost 3.10.0-514.10.2.el7.x86_64]# make -C /lib/modules/3.10.0-514.10.2.el7.x86_64/build/ M= /usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271/
make: Entering directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
make[1]: *** No rule to make target `arch/x86/syscalls/syscall_32.tbl', needed by `arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h'. Stop.
make: *** [archheaders] Error 2
make: Leaving directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
OR
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ pwd
/usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ make -C /lib/modules/3.10.0-514.10.2.el7.x86_64/build/ M= /usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271/clear
make: Entering directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
Makefile:641: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
make: *** No rule to make target `/usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271/clear'. Stop.
make: Leaving directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
Hoping someone might be able to advise where I am going wrong. Have been working on this for a few weeks and checked everywhere I could find. I am sure I am not "making" the file properly but do not really know enough ...
Linux semi-newb. Trying to learn and installed CentOS7 on my HP Pavilion 500 Desktop.
Trying to complete my wireless card driver install https://wiki.centos.org/HowTos/Laptops/ ... s/Broadcom
Basically stuck at step 3a in above link.
[root@localhost 3.10.0-514.10.2.el7.x86_64]# lspci -nn | grep Broadcom
03:00.0 Network controller [0280]: Broadcom Limited BCM43228 802.11a/b/g/n [14e4:4359]
Downloaded and unzipped appropriate driver.
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ pwd
/usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ ls
built-in.o lib Makefile src
[root@localhost modules]# pwd
/lib/modules
[root@localhost modules]# ls (NOT SURE BELOW WHICH ONE TO USE , TRYING THE FIRST)
3.10.0-514.10.2.el7.x86_64 3.10.0-514.el7.x86_64
*** I am not really sure how to run step 3a. I have run it from both directories and get the below:
[root@localhost 3.10.0-514.10.2.el7.x86_64]# pwd
/lib/modules/3.10.0-514.10.2.el7.x86_64
[root@localhost 3.10.0-514.10.2.el7.x86_64]# make -C /lib/modules/3.10.0-514.10.2.el7.x86_64/build/ M= /usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271/
make: Entering directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
make[1]: *** No rule to make target `arch/x86/syscalls/syscall_32.tbl', needed by `arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h'. Stop.
make: *** [archheaders] Error 2
make: Leaving directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
OR
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ pwd
/usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271
[sean@localhost hybrid-v35_64-nodebug-pcoem-6_30_223_271]$ make -C /lib/modules/3.10.0-514.10.2.el7.x86_64/build/ M= /usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271/clear
make: Entering directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
Makefile:641: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
make: *** No rule to make target `/usr/local/src/hybrid-wl/hybrid-v35_64-nodebug-pcoem-6_30_223_271/clear'. Stop.
make: Leaving directory `/usr/src/kernels/3.10.0-514.10.2.el7.x86_64'
Hoping someone might be able to advise where I am going wrong. Have been working on this for a few weeks and checked everywhere I could find. I am sure I am not "making" the file properly but do not really know enough ...