smartctl -i /dev/sda says the device is not in the database. This is CentOS 7.3.
So, my theory is the device can't be monitored properly - since the overall-health self-assessment of the the drive says PASSED. The output of smartctl -a seems to support this (see '231' line below).
How can I get more complete results with linux - do I really have to install windows and run the Kingston software?
I have checked the system bios, didn't see any drive temperatures in there. Since I'm using a server board from intel I have a BMC web control which has 23 temp sensors but most of them I can not identify, see further below.
Code: Select all
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.26.2.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, http://www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SA400S37240G
Serial Number: 50026B7773047082
LU WWN Device Id: 5 000000 000000000
Firmware Version: SBFK10D7
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Sep 3 12:00:54 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 4) minutes.
Extended self-test routine
recommended polling time: ( 32) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 569
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 56
148 Unknown_Attribute 0x0000 255 255 000 Old_age Offline - 0
149 Unknown_Attribute 0x0000 255 255 000 Old_age Offline - 281474976710655
167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 18
170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 35
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1
181 Program_Fail_Cnt_Total 0x0012 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0000 255 255 000 Old_age Offline - 281474976710655
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 52
194 Temperature_Celsius 0x0023 077 069 000 Pre-fail Always - 23 (Min/Max 19/31)
196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
218 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
231 Temperature_Celsius 0x0013 100 100 000 Pre-fail Always - 100
233 Media_Wearout_Indicator 0x0013 100 100 000 Pre-fail Always - 102
241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 113
242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 72
244 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1
246 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 25216
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.