lm-sensors

Issues related to hardware problems
Post Reply
Hecate
Posts: 4
Joined: 2017/11/27 18:37:23

lm-sensors

Post by Hecate » 2017/12/24 06:45:49

Hello guys, I need your help im using CentOS 7 and I want to make the cpu from full power to work at idle when it's not necessary there is command who can do that? I'm newbie so I don't know how to do it.

Right now,

I'm like this in sensors ->

acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +119.0°C)
temp2: +29.8°C (crit = +119.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +49.0°C (high = +82.0°C, crit = +100.0°C)
Core 0: +43.0°C (high = +82.0°C, crit = +100.0°C)
Core 1: +44.0°C (high = +82.0°C, crit = +100.0°C)
Core 2: +42.0°C (high = +82.0°C, crit = +100.0°C)
Core 3: +49.0°C (high = +82.0°C, crit = +100.0°C)
Core 4: +44.0°C (high = +82.0°C, crit = +100.0°C)
Core 5: +42.0°C (high = +82.0°C, crit = +100.0°C)

How can I make the CPU work at idle I'm hosting CS:GO and when I don't have players online I would like to have idle and when the cpu got some load like 5-6 people online playing to activate the full power like these temps.

User avatar
TrevorH
Forum Moderator
Posts: 23644
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: lm-sensors

Post by TrevorH » 2017/12/24 10:26:47

I'd suspect it comes out of the box set up to do that already.

What's the contents of the "file" /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor and /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ?
CentOS 5 died in March 2017 - migrate NOW!
Full time Geek, part time moderator. Use the FAQ Luke

Post Reply