The installers have worked on different hardware but this setup.
The install gets into an infinite loop with these errors (from what I could make out from my phones camera):
Code: Select all
PCIe bus error corrected
AER error Device Id=00ea
Device=[8086:a11a]
This system has Intel Core i7 6820EQ (Skylake) CPU with 16Gb DDR4 RAM.
This link shows the basic system info (obtained from a working Red Hat 6.9 install on the hardware).
http://pastebin.centos.org/575231/
It appears there is a compatibility issue between kernel 3.10 and the Intel Skylake chipset.
I found this boot parameter for a Centos/Redhat 6.* work around, but it doesn't work for v7.
Code: Select all
pci=nommconf
The above kernel option disables Memory-Mapped PCI Configuration Space. All devices are
accessed in the original way, which works around this problem for OS v6, but apparently not v7.
Can anyone please shed any light on how I can resolve this problem for CentOS 7?
Thanks in advance!
Ref:
https://unix.stackexchange.com/question ... er-bad-tlp
https://siweston.wordpress.com/2017/08/ ... 260-g2-pc/