No SAN connection with the latest kernel
Posted: 2018/05/18 07:51:13
Hi,
we have some bl465c G7 blades with Emulex cnas.
These devices uses the be2net and lpfc drivers for network and fc connections.
I reinstalled one of the blades with an 1511.iso (i know it's old but the DVD is in the bladecenter and installing systems over Ilom is a ...) and all is working.
After yum upgrade to the latest version, i lost the connection to the SAN.
In the bootlog i can see this:
May 17 17:52:52 blade-server-16 kernel: Command line: BOOT_IMAGE=/vmlinuz-3.10.0-862.2.3.el7.x86_64 root=UUID=c02e6a02-88ed-4757-a57d-b36a581b85ea ro rhgb quiet LANG=de_DE.UTF-8
...
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.2: 0:1412 Failed to set up driver resource.
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.2: Driver probe function unexpectedly returned 16
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.3: 0:1412 Failed to set up driver resource.
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.3: Driver probe function unexpectedly returned 16
I don't know if this only happens in this kernel version, because i switch directly from 3.10.0-514 to 3.10.0-862.2.3 .
Have someone seen the same problem and have a solution?
lspci:
04:00.0 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.1 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.2 Fibre Channel: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE CNA (rev 02)
04:00.3 Fibre Channel: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE CNA (rev 02)
04:00.4 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.5 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.6 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.7 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
Silvio
we have some bl465c G7 blades with Emulex cnas.
These devices uses the be2net and lpfc drivers for network and fc connections.
I reinstalled one of the blades with an 1511.iso (i know it's old but the DVD is in the bladecenter and installing systems over Ilom is a ...) and all is working.
After yum upgrade to the latest version, i lost the connection to the SAN.
In the bootlog i can see this:
May 17 17:52:52 blade-server-16 kernel: Command line: BOOT_IMAGE=/vmlinuz-3.10.0-862.2.3.el7.x86_64 root=UUID=c02e6a02-88ed-4757-a57d-b36a581b85ea ro rhgb quiet LANG=de_DE.UTF-8
...
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.2: 0:1412 Failed to set up driver resource.
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.2: Driver probe function unexpectedly returned 16
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.3: 0:1412 Failed to set up driver resource.
May 17 17:52:55 blade-server-16 kernel: lpfc 0000:04:00.3: Driver probe function unexpectedly returned 16
I don't know if this only happens in this kernel version, because i switch directly from 3.10.0-514 to 3.10.0-862.2.3 .
Have someone seen the same problem and have a solution?
lspci:
04:00.0 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.1 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.2 Fibre Channel: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE CNA (rev 02)
04:00.3 Fibre Channel: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE CNA (rev 02)
04:00.4 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.5 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.6 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.7 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
Silvio