Asus h170m-e d3 problem with pci network card
Asus h170m-e d3 problem with pci network card
Hi!
When booting a message apeears "can't pci upodate bar". I didnt pay attention at first.
But after 100 tries to ifup enp2s0 and no traffic goes I remember that message.
Centos 7 detect this card, I can ifup and ifdown but no traffic flows
I tried a lot of cards issue was the same
PCI-E cards work good. But my aim is to make pci card work as secondary one.
What had been done:
- Bios update
- varios card test
- varios manipulations with options
No result. No traffic flows...
I suppose no correct support of this chipset. What ideas ?
When booting a message apeears "can't pci upodate bar". I didnt pay attention at first.
But after 100 tries to ifup enp2s0 and no traffic goes I remember that message.
Centos 7 detect this card, I can ifup and ifdown but no traffic flows
I tried a lot of cards issue was the same
PCI-E cards work good. But my aim is to make pci card work as secondary one.
What had been done:
- Bios update
- varios card test
- varios manipulations with options
No result. No traffic flows...
I suppose no correct support of this chipset. What ideas ?
Re: Asus h170m-e d3 problem with pci network card
What's the output from lspci -nn | grep -i net ?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: Asus h170m-e d3 problem with pci network card
Code: Select all
# lspci -nn | grep -i net
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
But enp2s0 fails
Re: Asus h170m-e d3 problem with pci network card
The first card is using a different driver to the second. Might be worth trying with ELRepo's kmod-r8168 package installed and see if that works better.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: Asus h170m-e d3 problem with pci network card
I did:
But nothing changed (
Code: Select all
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
yum install kmod-r8168 -y
reboot
Re: Asus h170m-e d3 problem with pci network card
Code: Select all
# lshw -C network
*-network
description: Ethernet interface
product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 10
serial: 00:1e:2c:5a:05:44
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full latency=32 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
resources: irq:18 ioport:2000(size=256) memory:c8010000-c80100ff memory:c8000000-c800ffff
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: enp3s0
version: 15
serial: 70:8b:cd:7f:2e:11
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=full ip=192.168.10.210 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:124 ioport:e000(size=256) memory:f7004000-f7004fff memory:f7000000-f7003fff
Re: Asus h170m-e d3 problem with pci network card
Code: Select all
# lsmod | grep 8168
r8168 551771 0
Re: Asus h170m-e d3 problem with pci network card
Hmm, your lshw output seems to show that the device with the problem is the other one, not the r8168 device. There are multiple drivers for 8139 cards, perhaps try one of the others - 8139cp, 8139too and it's currently the 8139too one in use. You can test by using modprobe -r 8139too to remove it and then modprobe 8139cp and see if that's any better. If it is then you'll probably need to add a blacklist entry in /etc/modprobe.d and rebuild your initramfs using dracut afterwards. Try the modprobe tests first.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: Asus h170m-e d3 problem with pci network card
Yes, the problem is with enp2s0 (PCI card)
all the samemodprobe -r 8139cp
modprobe 8139too
Error: No suitable device found for this connectionmodprobe -r 8139too
modprobe 8139cp
ifup enp2s0
Re: Asus h170m-e d3 problem with pci network card
After modprobing 8139cp, is there more info in the output from `dmesg`? Did the device name change perhaps?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke