Compatible PCI video card
Posted: 2018/12/31 22:09:16
I have been trying to upgrade to a newer distro for the past few years with limited success. My PC is ten years old. My integrated GPU has not been stable with Mint, Fedora 27, and now CentOS 7. With CentOS, I get about 5 to 10 minutes before the GPU gets confused and I have to try to power down the system gracefully before it locks.
I have a spare PCI slot and I would love to buy a video card that is stable with CentOS 7.
Performance requirements are pretty low:
1. control at least one LCD monitor
2. handle typical photos
3. handle solitare
Thanks,
Jeff
Hardware:
MoBo: M3N78-VM
CPU: AMD Athlon II
GPU: NVIDIA GeForce 8200 (MCP78S) (to be replaced)
Here's getinfo driver:
Information for driver problems.
The kitchen sink as needed:
Information for general problems.
I have a spare PCI slot and I would love to buy a video card that is stable with CentOS 7.
Performance requirements are pretty low:
1. control at least one LCD monitor
2. handle typical photos
3. handle solitare
Thanks,
Jeff
Hardware:
MoBo: M3N78-VM
CPU: AMD Athlon II
GPU: NVIDIA GeForce 8200 (MCP78S) (to be replaced)
Here's getinfo driver:
Information for driver problems.
Code: Select all
== BEGIN uname -rmi ==
3.10.0-957.el7.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-7-6.1810.2.el7.centos.x86_64
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS Linux release 7.6.1810 (Core)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN free -m ==
total used free shared buff/cache available
Mem: 7695 1049 5264 38 1381 6302
Swap: 7935 0 7935
== END free -m ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-3.10.0-957.el7.x86_64
kernel-devel-3.10.0-957.el7.x86_64
kernel-headers-3.10.0-957.el7.x86_64
kernel-tools-3.10.0-957.el7.x86_64
kernel-tools-libs-3.10.0-957.el7.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200] [10de:0849] (rev a2)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 002 Device 002: ID 04f9:002b Brother Industries, Ltd HL-5250DN Printer
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13b1:0041 Linksys Gigabit Ethernet Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
kmod-libs-20-23.el7.x86_64
kmod-kvdo-6.1.1.125-5.el7.x86_64
kmod-20-23.el7.x86_64
== END rpm -qa kmod\* kmdl\* ==
Information for general problems.
Code: Select all
== BEGIN uname -rmi ==
3.10.0-957.el7.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-7-6.1810.2.el7.centos.x86_64
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS Linux release 7.6.1810 (Core)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN free -m ==
total used free shared buff/cache available
Mem: 7695 1093 5378 36 1224 6263
Swap: 7935 0 7935
== END free -m ==
== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.7.5-76.el7.x86_64
rpm-build-4.11.3-35.el7.x86_64
rpm-build-libs-4.11.3-35.el7.x86_64
rpm-libs-4.11.3-35.el7.x86_64
rpm-python-4.11.3-35.el7.x86_64
rpm-sign-4.11.3-35.el7.x86_64
yum-3.4.3-161.el7.centos.noarch
yum-langpacks-0.4.2-7.el7.noarch
yum-metadata-parser-1.1.4-10.el7.x86_64
yum-plugin-fastestmirror-1.1.31-50.el7.noarch
yum-utils-1.1.31-50.el7.noarch
== END rpm -qa yum\* rpm-\* python | sort ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-CR.repo
CentOS-Debuginfo.repo
CentOS-fasttrack.repo
CentOS-Media.repo
CentOS-Sources.repo
CentOS-Vault.repo
== END ls /etc/yum.repos.d ==
== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=23&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==
== BEGIN yum repolist all ==
Another app is currently holding the yum lock; waiting for it to exit...
.
.
.
The other application is: PackageKit
Memory : 68 M RSS (1.4 GB VSZ)
Started: Mon Dec 31 14:32:23 2018 - 00:08 ago
State : Sleeping, pid: 7353
Loading mirror speeds from cached hostfile
* base: mirror.genesisadaptive.com
* extras: mirror.mobap.edu
* updates: centos2.zswap.net
repo id repo name status
C7.0.1406-base/x86_64 CentOS-7.0.1406 - Base disabled
C7.0.1406-centosplus/x86_64 CentOS-7.0.1406 - CentOSPlus disabled
C7.0.1406-extras/x86_64 CentOS-7.0.1406 - Extras disabled
C7.0.1406-fasttrack/x86_64 CentOS-7.0.1406 - Fasttrack disabled
C7.0.1406-updates/x86_64 CentOS-7.0.1406 - Updates disabled
C7.1.1503-base/x86_64 CentOS-7.1.1503 - Base disabled
C7.1.1503-centosplus/x86_64 CentOS-7.1.1503 - CentOSPlus disabled
C7.1.1503-extras/x86_64 CentOS-7.1.1503 - Extras disabled
C7.1.1503-fasttrack/x86_64 CentOS-7.1.1503 - Fasttrack disabled
C7.1.1503-updates/x86_64 CentOS-7.1.1503 - Updates disabled
C7.2.1511-base/x86_64 CentOS-7.2.1511 - Base disabled
C7.2.1511-centosplus/x86_64 CentOS-7.2.1511 - CentOSPlus disabled
C7.2.1511-extras/x86_64 CentOS-7.2.1511 - Extras disabled
C7.2.1511-fasttrack/x86_64 CentOS-7.2.1511 - Fasttrack disabled
C7.2.1511-updates/x86_64 CentOS-7.2.1511 - Updates disabled
C7.3.1611-base/x86_64 CentOS-7.3.1611 - Base disabled
C7.3.1611-centosplus/x86_64 CentOS-7.3.1611 - CentOSPlus disabled
C7.3.1611-extras/x86_64 CentOS-7.3.1611 - Extras disabled
C7.3.1611-fasttrack/x86_64 CentOS-7.3.1611 - Fasttrack disabled
C7.3.1611-updates/x86_64 CentOS-7.3.1611 - Updates disabled
C7.4.1708-base/x86_64 CentOS-7.4.1708 - Base disabled
C7.4.1708-centosplus/x86_64 CentOS-7.4.1708 - CentOSPlus disabled
C7.4.1708-extras/x86_64 CentOS-7.4.1708 - Extras disabled
C7.4.1708-fasttrack/x86_64 CentOS-7.4.1708 - Fasttrack disabled
C7.4.1708-updates/x86_64 CentOS-7.4.1708 - Updates disabled
C7.5.1804-base/x86_64 CentOS-7.5.1804 - Base disabled
C7.5.1804-centosplus/x86_64 CentOS-7.5.1804 - CentOSPlus disabled
C7.5.1804-extras/x86_64 CentOS-7.5.1804 - Extras disabled
C7.5.1804-fasttrack/x86_64 CentOS-7.5.1804 - Fasttrack disabled
C7.5.1804-updates/x86_64 CentOS-7.5.1804 - Updates disabled
base/7/x86_64 CentOS-7 - Base enabled: 10,019
base-debuginfo/x86_64 CentOS-7 - Debuginfo disabled
base-source/7 CentOS-7 - Base Sources disabled
c7-media CentOS-7 - Media disabled
centosplus/7/x86_64 CentOS-7 - Plus disabled
centosplus-source/7 CentOS-7 - Plus Sources disabled
cr/7/x86_64 CentOS-7 - cr disabled
extras/7/x86_64 CentOS-7 - Extras enabled: 321
extras-source/7 CentOS-7 - Extras Sources disabled
fasttrack/7/x86_64 CentOS-7 - fasttrack disabled
updates/7/x86_64 CentOS-7 - Updates enabled: 624
updates-source/7 CentOS-7 - Updates Sources disabled
repolist: 10,964
== END yum repolist all ==
== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== BEGIN cat /etc/fstab ==
#
# /etc/fstab
# Created by anaconda on Sat Dec 29 20:56:32 2018
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/centos-root / xfs defaults 0 0
UUID=35208e8f-afbb-498d-acde-4d20ce592d21 /boot xfs defaults 0 0
/dev/mapper/centos-home /home xfs defaults 0 0
/dev/mapper/centos-swap swap swap defaults 0 0
== END cat /etc/fstab ==
== BEGIN df -h ==
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 50G 5.3G 45G 11% /
devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs 3.8G 16M 3.8G 1% /dev/shm
tmpfs 3.8G 9.8M 3.8G 1% /run
tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/sdb1 1014M 180M 835M 18% /boot
/dev/mapper/centos-home 873G 193M 873G 1% /home
tmpfs 770M 44K 770M 1% /run/user/1000
== END df -h ==
== BEGIN fdisk -lu ==
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: dos
Disk identifier: 0x00076394
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 2099199 1048576 83 Linux
/dev/sdb2 2099200 1953523711 975712256 8e Linux LVM
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: dos
Disk identifier: 0x088e854c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 1953523711 975712256 8e Linux LVM
Disk /dev/mapper/centos-root: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/centos-swap: 8321 MB, 8321499136 bytes, 16252928 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/fedora-swap: 8376 MB, 8376025088 bytes, 16359424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/fedora-home: 937.1 GB, 937062039552 bytes, 1830199296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/fedora-root: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/centos-home: 937.1 GB, 937112371200 bytes, 1830297600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
== END fdisk -lu ==
== BEGIN blkid ==
/dev/sdb1: UUID="35208e8f-afbb-498d-acde-4d20ce592d21" TYPE="xfs"
/dev/sdb2: UUID="G10Q73-0Ncq-FuPt-2Dc2-7KVI-qYOx-iDtkAQ" TYPE="LVM2_member"
/dev/sda1: UUID="1012ee66-f48f-457e-80d8-f5545d360a14" TYPE="ext4"
/dev/sda2: UUID="r9WTbU-9P4h-Cv2x-h05i-nTQQ-HfiT-SAOuXN" TYPE="LVM2_member"
/dev/mapper/centos-root: UUID="c1defc20-bd3c-4086-8a82-f275d2492cbc" TYPE="xfs"
/dev/mapper/centos-swap: UUID="71cf2e90-f185-4edd-bce5-59f1083041c3" TYPE="swap"
/dev/mapper/fedora-swap: UUID="e103392e-5fd8-46d3-b38c-9e2e87985893" TYPE="swap"
/dev/mapper/fedora-home: UUID="69b6a1c2-ccc7-498a-84ed-27e9caa0aeb9" TYPE="ext4"
/dev/mapper/fedora-root: UUID="057d050b-03b5-4e32-b90d-7ced80e8bdee" TYPE="ext4"
/dev/mapper/centos-home: UUID="05d58dd8-0ae3-4696-9246-8da6af3b158c" TYPE="xfs"
== END blkid ==
== BEGIN cat /proc/mdstat ==
Personalities :
unused devices: <none>
== END cat /proc/mdstat ==
== BEGIN pvs ==
PV VG Fmt Attr PSize PFree
/dev/sda2 fedora lvm2 a-- <930.51g 0
/dev/sdb2 centos lvm2 a-- <930.51g 4.00m
== END pvs ==
== BEGIN vgs ==
VG #PV #LV #SN Attr VSize VFree
centos 1 3 0 wz--n- <930.51g 4.00m
fedora 1 3 0 wz--n- <930.51g 0
== END vgs ==
== BEGIN lvs ==
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
home centos -wi-ao---- 872.75g
root centos -wi-ao---- 50.00g
swap centos -wi-ao---- 7.75g
home fedora -wi-a----- <872.71g
root fedora -wi-a----- 50.00g
swap fedora -wi-a----- 7.80g
== END lvs ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-3.10.0-957.el7.x86_64
kernel-devel-3.10.0-957.el7.x86_64
kernel-headers-3.10.0-957.el7.x86_64
kernel-tools-3.10.0-957.el7.x86_64
kernel-tools-libs-3.10.0-957.el7.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200] [10de:0849] (rev a2)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 002 Device 002: ID 04f9:002b Brother Industries, Ltd HL-5250DN Printer
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13b1:0041 Linksys Gigabit Ethernet Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
kmod-libs-20-23.el7.x86_64
kmod-kvdo-6.1.1.125-5.el7.x86_64
kmod-20-23.el7.x86_64
== END rpm -qa kmod\* kmdl\* ==
== BEGIN ifconfig -a ==
enp0s2f1u3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::a034:9f78:3913:9315 prefixlen 64 scopeid 0x20<link>
ether 94:10:3e:b8:91:a7 txqueuelen 1000 (Ethernet)
RX packets 181547 bytes 265880245 (253.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 99919 bytes 6297178 (6.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 100 bytes 9552 (9.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 100 bytes 9552 (9.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:57:2d:5b txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0-nic: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 52:54:00:57:2d:5b txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
== END ifconfig -a ==
== BEGIN brctl show ==
bridge name bridge id STP enabled interfaces
virbr0 8000.525400572d5b yes virbr0-nic
== END brctl show ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 enp0s2f1u3
192.168.0.0 0.0.0.0 255.255.255.0 U 100 0 0 enp0s2f1u3
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
== END route -n ==
== BEGIN sysctl -a | grep .rp_filter ==
sysctl: reading key "net.ipv6.conf.all.stable_secret"
sysctl: reading key "net.ipv6.conf.default.stable_secret"
sysctl: reading key "net.ipv6.conf.enp0s2f1u3.stable_secret"
sysctl: reading key "net.ipv6.conf.lo.stable_secret"
sysctl: reading key "net.ipv6.conf.virbr0.stable_secret"
sysctl: reading key "net.ipv6.conf.virbr0-nic.stable_secret"
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.enp0s2f1u3.arp_filter = 0
net.ipv4.conf.enp0s2f1u3.rp_filter = 1
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.virbr0.arp_filter = 0
net.ipv4.conf.virbr0.rp_filter = 1
net.ipv4.conf.virbr0-nic.arp_filter = 0
net.ipv4.conf.virbr0-nic.rp_filter = 1
== END sysctl -a | grep .rp_filter ==
== BEGIN ip rule show ==
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
== END ip rule show ==
== BEGIN ip route show ==
default via 192.168.0.1 dev enp0s2f1u3 proto dhcp metric 100
192.168.0.0/24 dev enp0s2f1u3 proto kernel scope link src 192.168.0.2 metric 100
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
== END ip route show ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search Home
nameserver 192.168.0.1
== END cat /etc/resolv.conf ==
== BEGIN egrep 'net|hosts' /etc/nsswitch.conf ==
#hosts: db files nisplus nis dns
hosts: files dns myhostname
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus sss
== END egrep 'net|hosts' /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
If you want to list systemd services use 'systemctl list-unit-files'.
To see services enabled on particular target use
'systemctl list-dependencies [target]'.
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==