Hi t All,
Could SomeOne resolve this problem?
a.) I am migrating from Centos5, wich is for me very good, to Centos7 , also if some friends of mine suggested me Ubunto. Therefore I begin to make some tests with two machines: the first one server: 192.168.1.48; and the second one client (windows8) 192.168.1.50.
b.) The pings from the client to the server and from the server to the client are OK;
c.) If, in thr server browse I type : localhost:8080, the program I am interested to, is executed . The program is Servoy server, installed in to th l user "annunciazione" in /home/annunciazione/. This user is seen as "Out of networking " in the GUI of the server.
d.) But, if I work in th client machine, and and I type in the browser: 192.168.1.48:8080 I do not estabilish any contact.
I append the server ipconfig result.
Tanks in advance to wich could resolve this problem and kindly give an answer.
Regards
Girolamo
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.48 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::56a0:50ff:fe7c:50a6 prefixlen 64 scopeid 0x20<link>
ether 54:a0:50:7c:50:a6 txqueuelen 1000 (Ethernet)
RX packets 7451 bytes 635821 (620.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 25864 bytes 1704768 (1.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 88478 bytes 232388984 (221.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 88478 bytes 232388984 (221.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Centos7 impossible to Connect to 192.168.1.48:8080
Re: Centos7 impossible to Connect to 192.168.1.48:8080
Hello
Is firewalld running?
If so, is it configured to allow port 8080?
If not:
For further info, see Open Ports in the Firewall Using the Command Line Interface (CLI) in the Red Hat Enterprise Linux 7 Security Guide.
Is firewalld running?
Code: Select all
~]# systemctl status firewalld
Code: Select all
~]# firewall-cmd --list-all
Code: Select all
~]# firewall-cmd --add-port=8080/tcp
Re: Centos7 impossible to Connect to 192.168.1.48:8080
Hi Stephenw,
Your indication is, not only right, but also scientifically systematic.
Resolved (firewall).
My best compliments to You.
Tanks.
Girolamo
Your indication is, not only right, but also scientifically systematic.
Resolved (firewall).
My best compliments to You.
Tanks.
Girolamo