When I connect my machine to either a wired or a wireless connection, I can successfully get it to connect to the router and see the gateway and even access the gateway's web GUI (particularly at home) but the network connect screen never shows I have an IPv4 (I don't use IPv6) address.
As I type this I now have a connection on the laptop so I could access the site and some repo's to grab the getinfo script and run that (which will have the github link below) but it still shows as 0.0.0.0.
The part I'm trying to figure out is that no actual connection outside of the gateway is made for around 24 hours after I connect. I left my laptop on and connected from yesterday when I booted it to just a few minutes ago and finally noticed I have a connection.
Here is the getinfo.sh network output. Please let me know if you need any further info.
https://gist.github.com/yamipirogoeth/9 ... c38a650401
Can connect to a network but connection isn't active for almost 24 hours
-
- Posts: 3
- Joined: 2017/03/19 08:31:23
Re: Can connect to a network but connection isn't active for almost 24 hours
What is the output of iptables-save
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
-
- Posts: 3
- Joined: 2017/03/19 08:31:23
Re: Can connect to a network but connection isn't active for almost 24 hours
Hello,
Please see the info requested https://gist.github.com/yamipirogoeth/8 ... 06183e4c11
I grabbed this while my laptop says it is connected to my home WiFi but can not access anything on the internet other than my router's GUI.
Please see the info requested https://gist.github.com/yamipirogoeth/8 ... 06183e4c11
I grabbed this while my laptop says it is connected to my home WiFi but can not access anything on the internet other than my router's GUI.
-
- Posts: 3
- Joined: 2017/03/19 08:31:23
Re: Can connect to a network but connection isn't active for almost 24 hours
Just wondering if there's an update in regards to that last github link I shared with the additional info?