Install Raspberry Pi 3 Model B+

Issues related to configuring your network
KyKyIIIKuH
Posts: 6
Joined: 2018/05/15 18:48:57

Install Raspberry Pi 3 Model B+

Post by KyKyIIIKuH » 2018/05/15 18:54:30

Hi.
After recording the image on microsd and then starting it, the following message appears:
A1c66PzVMqI.jpg
A1c66PzVMqI.jpg (228.1 KiB) Viewed 5730 times

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Install Raspberry Pi 3 Model B+

Post by TrevorH » 2018/05/15 18:59:00

That set of messages with "brcmf" all relate to the wireless card. Are you using that? The wired ethernet port will probably work and you can login at that screen too.

Oh, and which image file did you use?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

KyKyIIIKuH
Posts: 6
Joined: 2018/05/15 18:48:57

Re: Install Raspberry Pi 3 Model B+

Post by KyKyIIIKuH » 2018/05/15 19:03:44

TrevorH wrote:That set of messages with "brcmf" all relate to the wireless card. Are you using that? The wired ethernet port will probably work and you can login at that screen too.

Oh, and which image file did you use?
Image: CentOS-Userland-7-armv7hl-RaspberryPI-Minimal-1804-sda.raw.xz
Ethernet cable is not connected, Wi-Fi did not configure

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Install Raspberry Pi 3 Model B+

Post by TrevorH » 2018/05/15 19:20:38

Can you login at the command prompt there and look at the output from the dmesg command and, if possible, copy that up to the forum, or if very large to http://pastebin.centos.org
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

KyKyIIIKuH
Posts: 6
Joined: 2018/05/15 18:48:57

Re: Install Raspberry Pi 3 Model B+

Post by KyKyIIIKuH » 2018/05/15 19:35:48

TrevorH wrote:Can you login at the command prompt there and look at the output from the dmesg command and, if possible, copy that up to the forum, or if very large to http://pastebin.centos.org
http://pastebin.centos.org/768506/

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Install Raspberry Pi 3 Model B+

Post by TrevorH » 2018/05/15 19:43:58

I would suggest downloading https://github.com/RPi-Distro/firmware- ... 5-sdio.txt and replacing the copy of the same file on your system, probably be good to rename the original first - /lib/firmware/brcm/brcmfmac43455-sdio.txt
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

KyKyIIIKuH
Posts: 6
Joined: 2018/05/15 18:48:57

Re: Install Raspberry Pi 3 Model B+

Post by KyKyIIIKuH » 2018/05/15 19:48:30

TrevorH wrote:I would suggest downloading https://github.com/RPi-Distro/firmware- ... 5-sdio.txt and replacing the copy of the same file on your system, probably be good to rename the original first - /lib/firmware/brcm/brcmfmac43455-sdio.txt
Where do I go in order to make a replacement?

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Install Raspberry Pi 3 Model B+

Post by TrevorH » 2018/05/15 19:55:49

The file to be replaced is /lib/firmware/brcm/brcmfmac43455-sdio.txt. The file to replace it with is from https://github.com/RPi-Distro/firmware- ... 5-sdio.txt
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

KyKyIIIKuH
Posts: 6
Joined: 2018/05/15 18:48:57

Re: Install Raspberry Pi 3 Model B+

Post by KyKyIIIKuH » 2018/05/15 20:06:22

TrevorH wrote:The file to be replaced is /lib/firmware/brcm/brcmfmac43455-sdio.txt. The file to replace it with is from https://github.com/RPi-Distro/firmware- ... 5-sdio.txt
to configure the WiFi network, the package was installed:
yum install NetworkManager-tui

after reboot added 3 new lines
czrf0sHutao.jpg
czrf0sHutao.jpg (157.06 KiB) Viewed 5684 times
http://pastebin.centos.org/768516/

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Install Raspberry Pi 3 Model B+

Post by TrevorH » 2018/05/15 20:12:03

But it appears to be working now...
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

Post Reply