I followed the instructions.
but ran into the a problem
My IP Tables are not being listed
[root@ts ~]# ip route list table ens192 && ip route list table ens224 && ip route list table ens256
[root@ts ~]#
the IP Rule commands also does not return the expected values
[root@ts ~]# ip rule
0: from all lookup local
32765: from 192.168.111.254 lookup ens192
32766: from all lookup main
32767: from all lookup default
I ran the following commands that ran successfully
[root@ts ~]# nmcli connection down "Wired connection 2" && nmcli connection up "Wired connection 2" && nmcli connection down "192.168.111.240" && nmcli connection up "192.168.111.240" && nmcli connection down "ens192 192.168.111.240" && nmcli connection up "ens192 192.168.111.240"
Connection 'Wired connection 2' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/8)
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/10)
Connection '192.168.111.240' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/9)
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/11)
Connection 'ens192 192.168.111.240' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/5)
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/12)
and running the command is also successfull
[root@ts ~]# ip route flush table ens192 && ip route flush table ens224 && ip route flush table ens25
|
Checking my interfaces seems to be good
ens192: connected to ens192 192.168.111.240
"VMware VMXNET3 Ethernet Controller"
ethernet (vmxnet3), 00:0C:29:7C:8B:A3, hw, mtu 1500
ip4 default
inet4 192.168.111.240/24
route4 192.168.111.0/24
route4 0.0.0.0/0
inet6 fe80::20c:29ff:fe7c:8ba3/64
route6 ff00::/8
route6 fe80::/64
ens224: connected to 192.168.111.240
"VMware VMXNET3 Ethernet Controller"
ethernet (vmxnet3), 00:0C:29:7C:8B:AD, hw, mtu 1500
inet4 192.168.112.240/24
route4 192.168.112.0/24
inet6 fe80::20c:29ff:fe7c:8bad/64
route6 ff00::/8
route6 fe80::/64
ens256: connected to Wired connection 2
"VMware VMXNET3 Ethernet Controller"
ethernet (vmxnet3), 00:0C:29:7C:8B:B7, hw, mtu 1500
inet4 192.168.110.240/24
route4 192.168.110.0/24
inet6 fe80::20c:29ff:fe7c:8bb7/64
route6 ff00::/8
route6 fe80::/64
and
[root@ts ~]# nmcli con show -a
NAME UUID TYPE DEVICE
192.168.111.240 186c162e-1abc-3574-8be3-3a4a5409658f ethernet ens224
Wired connection 2 b234a56d-87b0-32fc-a209-49f994a8bbef ethernet ens256
ens192 192.168.111.240 e6d31966-1a84-4674-a562-037895080936 ethernet ens192
Routing tables (According to my possibly flawed understanding looks good)
[root@ts ~]# cat /etc/iproute2/rt_tables
#
# reserved values
#
255 local
254 main
253 default
0 unspec
#
# local
#
#1 inr.ruhep
200 isp2
500 ens192
501 ens224
502 ens256
I wen ahead and rebooted the whole server with the "reboot" command just to make sure.
Does anyone anyone perhaps have any advice?