Hello,
After installation of the CentOS 6.2 I noticed that I can't change resolution of my display beyond 1024x786 61Hz. Why is that so, that I am stuck with 1024x786, while my old laptop screen has default resolution of 1280x800 at 60Hz in Windows 7 and Ubuntu? My display driver is Intel 965 graphics controller. I checked via following commands
[root@centos X11]# cat /etc/X11/xorg.conf | more
Section "Device"
Identifier "Videocard0"
Driver "vesa"
EndSection
[root@centos X11]# xrandr -q
Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.0*
800x600 61.0
My question is how can I change the max resolution to 1280x800 so that whenever I boot I get my desirable resolution? Your help will be much appreciated.
intel 965 display options
Re: intel 965 display options
Try just moving /etc/X11/xorg.conf out of the way - it's meant to no longer be needed and it may be confusing the issue.
Re: intel 965 display options
Ok then where should I enter the configuration of my display to make 1280x800 at 59 Hz the default value instead of 1024x768?
-
pschaff
- Retired Moderator
- Posts: 18276
- Joined: 2006/12/13 20:15:34
- Location: Tidewater, Virginia, North America
- Contact:
intel 965 display options
You should not have to enter the configuration manually. If the adapter supports the desired resolution it should be a choice in the GUI Display configuration. You should be able to see the available modes with [b]xrandr[/b]. If the desired mode is not present the ELRepo [url=http://elrepo.org/tiki/xorg-x11-drv-intel]xorg-x11-drv-intel[/url] package may be worth a try.
If more help is needed then please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh" and showing us the output file.
If more help is needed then please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh" and showing us the output file.
Re: intel 965 display options
[quote]
pschaff wrote:
You should not have to enter the configuration manually. If the adapter supports the desired resolution it should be a choice in the GUI Display configuration. You should be able to see the available modes with [b]xrandr[/b]. If the desired mode is not present the ELRepo [url=http://elrepo.org/tiki/xorg-x11-drv-intel]xorg-x11-drv-intel[/url] package may be worth a try.
If more help is needed then please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh" and showing us the output file.[/quote]
OK instead of all the lengthy output I have pasted the relevant info as under:
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-devel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-devel-2.6.32-220.7.1.el6.x86_64
kernel-devel-2.6.32-220.el6.x86_64
kernel-firmware-2.6.32-220.7.1.el6.centos.plus.noarch
kernel-headers-2.6.32-220.7.1.el6.centos.plus.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 064e:c108 Suyin Corp.
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
== END lsusb ==
Though I'll check that repo you mentioned and update. Thanks for reply
pschaff wrote:
You should not have to enter the configuration manually. If the adapter supports the desired resolution it should be a choice in the GUI Display configuration. You should be able to see the available modes with [b]xrandr[/b]. If the desired mode is not present the ELRepo [url=http://elrepo.org/tiki/xorg-x11-drv-intel]xorg-x11-drv-intel[/url] package may be worth a try.
If more help is needed then please [url=http://www.centos.org/modules/newbb/viewtopic.php?topic_id=28723&forum=54]provide more information about your system[/url] by running "./getinfo.sh" and showing us the output file.[/quote]
OK instead of all the lengthy output I have pasted the relevant info as under:
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-devel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-devel-2.6.32-220.7.1.el6.x86_64
kernel-devel-2.6.32-220.el6.x86_64
kernel-firmware-2.6.32-220.7.1.el6.centos.plus.noarch
kernel-headers-2.6.32-220.7.1.el6.centos.plus.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 064e:c108 Suyin Corp.
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
== END lsusb ==
Though I'll check that repo you mentioned and update. Thanks for reply
Re: intel 965 display options
You probably don't even need the newer version of xorg-x11-drv-intel that's in ELRepo - is it already installed and if not, try installing it from the CentOS repos first.
-
pschaff
- Retired Moderator
- Posts: 18276
- Joined: 2006/12/13 20:15:34
- Location: Tidewater, Virginia, North America
- Contact:
Re: intel 965 display options
That's hardly all the relevant information. The kernel you are running, at the top of the output is highly relevant, and the repo configs may be as well.
I agree with Trevor that the ELRepo packages are only needed if things are not working correctly.
I agree with Trevor that the ELRepo packages are only needed if things are not working correctly.
Re: intel 965 display options
[quote]
pschaff wrote:
That's hardly all the relevant information. The kernel you are running, at the top of the output is highly relevant, and the repo configs may be as well.
I agree with Trevor that the ELRepo packages are only needed if things are not working correctly.[/quote]
OK here is the complete output of the file, though EPEL repo is already enabled.
Information for general problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.7.1.el6.centos.plus.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
rpmforge-release-0.5.2-2.el6.rf.x86_64
epel-release-6-5.noarch
centos-release-6-2.el6.centos.7.x86_64
adobe-release-x86_64-1.0-1.noarch
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.2 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 1997 1857 139 0 159 532
-/+ buffers/cache: 1165 831
Swap: 1999 0 1999
== END free -m ==
== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-29.el6.x86_64
rpm-build-4.8.0-19.el6_2.1.x86_64
rpm-libs-4.8.0-19.el6_2.1.x86_64
rpm-python-4.8.0-19.el6_2.1.x86_64
yum-3.2.29-22.el6.centos.2.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-10.el6.noarch
yum-plugin-priorities-1.1.30-10.el6.noarch
yum-plugin-security-1.1.30-10.el6.noarch
yum-utils-1.1.30-10.el6.noarch
== END rpm -qa yum\* rpm-\* python | sort ==
== BEGIN ls /etc/yum.repos.d ==
adobe-linux-x86_64.repo
atrpms-bleeding.repo
atrpms.repo
atrpms.repo~
atrpms-testing.repo
CentOS-Base.repo
CentOS-Base.repo~
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Media.repo~
epel.repo
epel.repo~
epel-testing.repo
google-chrome.repo
google.repo
linuxtech.repo
linuxtech.repo~
mirrors-rpmforge
mirrors-rpmforge-extras
mirrors-rpmforge-testing
rpmforge.repo
rpmforge.repo~
== END ls /etc/yum.repos.d ==
== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
metadata_expire=60m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==
== BEGIN yum repolist all ==
Loaded plugins: fastestmirror, priorities, refresh-packagekit, security
Repository google-chrome is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirror.averse.net
* rpmforge: fr2.rpmfind.net
* updates: mirror.averse.net
1218 packages excluded due to repository priority protections
repo id repo name status
adobe-linux-x86_64 Adobe Systems Incorporated enabled: 2
atrpms Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-bleeding Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-bleeding-debuginfo Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-bleeding-source Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-debuginfo Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-source Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-testing Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-testing-debuginfo Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-testing-source Red Hat Enterprise Linux 6 - x86_ disabled
base CentOS-6 - Base enabled: 6,208+86
c6-media CentOS-6 - Media disabled
centosplus CentOS-6 - Plus disabled
contrib CentOS-6 - Contrib disabled
debug CentOS-6 - Debuginfo disabled
epel Extra Packages for Enterprise Lin enabled: 7,175
epel-debuginfo Extra Packages for Enterprise Lin disabled
epel-source Extra Packages for Enterprise Lin disabled
epel-testing Extra Packages for Enterprise Lin disabled
epel-testing-debuginfo Extra Packages for Enterprise Lin disabled
epel-testing-source Extra Packages for Enterprise Lin disabled
extras CentOS-6 - Extras disabled
google-chrome google-chrome enabled: 3
linuxtech-backports LinuxTECH.NET el6 backports repo disabled
linuxtech-release LinuxTECH.NET el6 production repo disabled
linuxtech-testing LinuxTECH.NET el6 testing repo disabled
rpmforge RHEL 6 - RPMforge.net - dag enabled: 3,132+1,126
rpmforge-extras RHEL 6 - RPMforge.net - extras disabled
rpmforge-testing RHEL 6 - RPMforge.net - testing disabled
updates CentOS-6 - Updates enabled: 658+3
repolist: 17,178
== END yum repolist all ==
== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
priority = 3 [atrpms]
priority = 3 [epel]
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== BEGIN cat /etc/fstab ==
#
# /etc/fstab
# Created by anaconda on Tue Apr 3 03:36:29 2012
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_xenon-lv_root / ext4 defaults 1 1
UUID=1eaa6624-cab2-400d-8120-e4450fec5cbf /boot ext4 defaults 1 2
/dev/mapper/vg_xenon-lv_swap swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
== END cat /etc/fstab ==
== BEGIN df -h ==
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_xenon-lv_root
18G 6.2G 11G 38% /
tmpfs 999M 648K 998M 1% /dev/shm
/dev/sdb9 485M 55M 406M 12% /boot
== END df -h ==
== BEGIN fdisk -l ==
Disk /dev/mapper/vg_xenon-lv_root doesn't contain a valid partition table
Disk /dev/mapper/vg_xenon-lv_swap doesn't contain a valid partition table
Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9aef6141
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 7180 57671680 7 HPFS/NTFS
/dev/sdb2 * 7181 38914 254897499+ f W95 Ext'd (LBA)
/dev/sdb5 7181 14375 57793806 7 HPFS/NTFS
/dev/sdb6 14376 22208 62918541 7 HPFS/NTFS
/dev/sdb7 22209 30041 62918541 7 HPFS/NTFS
/dev/sdb8 30042 36318 50412756 7 HPFS/NTFS
/dev/sdb9 36318 36381 512000 83 Linux
/dev/sdb10 36382 38914 20339712 8e Linux LVM
Disk /dev/mapper/vg_xenon-lv_root: 18.7 GB, 18727567360 bytes
255 heads, 63 sectors/track, 2276 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_xenon-lv_swap: 2097 MB, 2097152000 bytes
255 heads, 63 sectors/track, 254 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
== END fdisk -l ==
== BEGIN parted -l ==
Model: ATA WDC WD3200BEVT-7 (scsi)
Disk /dev/sdb: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 59.1GB 59.1GB primary ntfs boot
2 59.1GB 320GB 261GB extended boot, lba
5 59.1GB 118GB 59.2GB logical ntfs
6 118GB 183GB 64.4GB logical ntfs
7 183GB 247GB 64.4GB logical ntfs
8 247GB 299GB 51.6GB logical ntfs
9 299GB 299GB 524MB logical ext4
10 299GB 320GB 20.8GB logical lvm
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/vg_xenon-lv_swap: 2097MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 2097MB 2097MB linux-swap(v1)
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/vg_xenon-lv_root: 18.7GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 18.7GB 18.7GB ext4
== END parted -l ==
== BEGIN blkid ==
/dev/sdb1: LABEL="OS" UUID="5AFEE2BAFEE28D97" TYPE="ntfs"
/dev/sdb5: LABEL="Data" UUID="0E1888FF1888E755" TYPE="ntfs"
/dev/sdb6: LABEL="Media" UUID="242C91162C90E3D8" TYPE="ntfs"
/dev/sdb7: LABEL="Software" UUID="70A89C69A89C2F98" TYPE="ntfs"
/dev/sdb8: LABEL="Misc" UUID="CC40A2E240A2D28E" TYPE="ntfs"
/dev/sdb9: UUID="1eaa6624-cab2-400d-8120-e4450fec5cbf" TYPE="ext4"
/dev/sdb10: UUID="D1WNh2-2nXE-12p7-NMC1-qt4N-VRCj-kbJr0h" TYPE="LVM2_member"
/dev/mapper/vg_xenon-lv_root: UUID="6fb0fd20-1a22-485c-9dd6-0fc896690bae" TYPE="ext4"
/dev/mapper/vg_xenon-lv_swap: UUID="5bc1bde2-e266-49a9-b26f-3268bef87d6c" TYPE="swap"
== END blkid ==
== BEGIN cat /proc/mdstat ==
Personalities :
unused devices: <none>
== END cat /proc/mdstat ==
== BEGIN pvs ==
PV VG Fmt Attr PSize PFree
/dev/sdb10 vg_xenon lvm2 a-- 19.39g 0
== END pvs ==
== BEGIN vgs ==
VG #PV #LV #SN Attr VSize VFree
vg_xenon 1 2 0 wz--n- 19.39g 0
== END vgs ==
== BEGIN lvs ==
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
lv_root vg_xenon -wi-ao 17.44g
lv_swap vg_xenon -wi-ao 1.95g
== END lvs ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-devel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-devel-2.6.32-220.7.1.el6.x86_64
kernel-devel-2.6.32-220.el6.x86_64
kernel-firmware-2.6.32-220.7.1.el6.centos.plus.noarch
kernel-headers-2.6.32-220.7.1.el6.centos.plus.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 064e:c108 Suyin Corp.
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
== END rpm -qa kmod\* kmdl\* ==
== BEGIN ifconfig -a ==
eth0 Link encap:Ethernet HWaddr 00:1E:EC:31:20:A2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2566 (2.5 KiB) TX bytes:2566 (2.5 KiB)
== END ifconfig -a ==
== BEGIN brctl show ==
bridge name bridge id STP enabled interfaces
== END brctl show ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 0.0.0.0 0.0.0.0 U 2 0 0 wlan0
0.0.0.0 0.0.0.0 0.0.0.0 UG 0 0 0 wlan0
== END route -n ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search linux
nameserver 0.0.0.0
== END cat /etc/resolv.conf ==
== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
matahari-network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==[/code]
Also here is the link to xorg.log file as under for more information. Your guidance & help will be highly appreciated.
[url=http://www.box.com/s/c534e7d9cd51da50ee75]http://www.box.com/s/c534e7d9cd51da50ee75[/url]
pschaff wrote:
That's hardly all the relevant information. The kernel you are running, at the top of the output is highly relevant, and the repo configs may be as well.
I agree with Trevor that the ELRepo packages are only needed if things are not working correctly.[/quote]
OK here is the complete output of the file, though EPEL repo is already enabled.
Information for general problems.
[code]
== BEGIN uname -rmi ==
2.6.32-220.7.1.el6.centos.plus.x86_64 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
rpmforge-release-0.5.2-2.el6.rf.x86_64
epel-release-6-5.noarch
centos-release-6-2.el6.centos.7.x86_64
adobe-release-x86_64-1.0-1.noarch
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 6.2 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Enforcing
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 1997 1857 139 0 159 532
-/+ buffers/cache: 1165 831
Swap: 1999 0 1999
== END free -m ==
== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-29.el6.x86_64
rpm-build-4.8.0-19.el6_2.1.x86_64
rpm-libs-4.8.0-19.el6_2.1.x86_64
rpm-python-4.8.0-19.el6_2.1.x86_64
yum-3.2.29-22.el6.centos.2.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-10.el6.noarch
yum-plugin-priorities-1.1.30-10.el6.noarch
yum-plugin-security-1.1.30-10.el6.noarch
yum-utils-1.1.30-10.el6.noarch
== END rpm -qa yum\* rpm-\* python | sort ==
== BEGIN ls /etc/yum.repos.d ==
adobe-linux-x86_64.repo
atrpms-bleeding.repo
atrpms.repo
atrpms.repo~
atrpms-testing.repo
CentOS-Base.repo
CentOS-Base.repo~
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Media.repo~
epel.repo
epel.repo~
epel-testing.repo
google-chrome.repo
google.repo
linuxtech.repo
linuxtech.repo~
mirrors-rpmforge
mirrors-rpmforge-extras
mirrors-rpmforge-testing
rpmforge.repo
rpmforge.repo~
== END ls /etc/yum.repos.d ==
== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
metadata_expire=60m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==
== BEGIN yum repolist all ==
Loaded plugins: fastestmirror, priorities, refresh-packagekit, security
Repository google-chrome is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirror.averse.net
* rpmforge: fr2.rpmfind.net
* updates: mirror.averse.net
1218 packages excluded due to repository priority protections
repo id repo name status
adobe-linux-x86_64 Adobe Systems Incorporated enabled: 2
atrpms Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-bleeding Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-bleeding-debuginfo Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-bleeding-source Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-debuginfo Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-source Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-testing Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-testing-debuginfo Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-testing-source Red Hat Enterprise Linux 6 - x86_ disabled
base CentOS-6 - Base enabled: 6,208+86
c6-media CentOS-6 - Media disabled
centosplus CentOS-6 - Plus disabled
contrib CentOS-6 - Contrib disabled
debug CentOS-6 - Debuginfo disabled
epel Extra Packages for Enterprise Lin enabled: 7,175
epel-debuginfo Extra Packages for Enterprise Lin disabled
epel-source Extra Packages for Enterprise Lin disabled
epel-testing Extra Packages for Enterprise Lin disabled
epel-testing-debuginfo Extra Packages for Enterprise Lin disabled
epel-testing-source Extra Packages for Enterprise Lin disabled
extras CentOS-6 - Extras disabled
google-chrome google-chrome enabled: 3
linuxtech-backports LinuxTECH.NET el6 backports repo disabled
linuxtech-release LinuxTECH.NET el6 production repo disabled
linuxtech-testing LinuxTECH.NET el6 testing repo disabled
rpmforge RHEL 6 - RPMforge.net - dag enabled: 3,132+1,126
rpmforge-extras RHEL 6 - RPMforge.net - extras disabled
rpmforge-testing RHEL 6 - RPMforge.net - testing disabled
updates CentOS-6 - Updates enabled: 658+3
repolist: 17,178
== END yum repolist all ==
== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
priority = 3 [atrpms]
priority = 3 [epel]
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== BEGIN cat /etc/fstab ==
#
# /etc/fstab
# Created by anaconda on Tue Apr 3 03:36:29 2012
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_xenon-lv_root / ext4 defaults 1 1
UUID=1eaa6624-cab2-400d-8120-e4450fec5cbf /boot ext4 defaults 1 2
/dev/mapper/vg_xenon-lv_swap swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
== END cat /etc/fstab ==
== BEGIN df -h ==
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_xenon-lv_root
18G 6.2G 11G 38% /
tmpfs 999M 648K 998M 1% /dev/shm
/dev/sdb9 485M 55M 406M 12% /boot
== END df -h ==
== BEGIN fdisk -l ==
Disk /dev/mapper/vg_xenon-lv_root doesn't contain a valid partition table
Disk /dev/mapper/vg_xenon-lv_swap doesn't contain a valid partition table
Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9aef6141
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 7180 57671680 7 HPFS/NTFS
/dev/sdb2 * 7181 38914 254897499+ f W95 Ext'd (LBA)
/dev/sdb5 7181 14375 57793806 7 HPFS/NTFS
/dev/sdb6 14376 22208 62918541 7 HPFS/NTFS
/dev/sdb7 22209 30041 62918541 7 HPFS/NTFS
/dev/sdb8 30042 36318 50412756 7 HPFS/NTFS
/dev/sdb9 36318 36381 512000 83 Linux
/dev/sdb10 36382 38914 20339712 8e Linux LVM
Disk /dev/mapper/vg_xenon-lv_root: 18.7 GB, 18727567360 bytes
255 heads, 63 sectors/track, 2276 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_xenon-lv_swap: 2097 MB, 2097152000 bytes
255 heads, 63 sectors/track, 254 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
== END fdisk -l ==
== BEGIN parted -l ==
Model: ATA WDC WD3200BEVT-7 (scsi)
Disk /dev/sdb: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 59.1GB 59.1GB primary ntfs boot
2 59.1GB 320GB 261GB extended boot, lba
5 59.1GB 118GB 59.2GB logical ntfs
6 118GB 183GB 64.4GB logical ntfs
7 183GB 247GB 64.4GB logical ntfs
8 247GB 299GB 51.6GB logical ntfs
9 299GB 299GB 524MB logical ext4
10 299GB 320GB 20.8GB logical lvm
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/vg_xenon-lv_swap: 2097MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 2097MB 2097MB linux-swap(v1)
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/vg_xenon-lv_root: 18.7GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 18.7GB 18.7GB ext4
== END parted -l ==
== BEGIN blkid ==
/dev/sdb1: LABEL="OS" UUID="5AFEE2BAFEE28D97" TYPE="ntfs"
/dev/sdb5: LABEL="Data" UUID="0E1888FF1888E755" TYPE="ntfs"
/dev/sdb6: LABEL="Media" UUID="242C91162C90E3D8" TYPE="ntfs"
/dev/sdb7: LABEL="Software" UUID="70A89C69A89C2F98" TYPE="ntfs"
/dev/sdb8: LABEL="Misc" UUID="CC40A2E240A2D28E" TYPE="ntfs"
/dev/sdb9: UUID="1eaa6624-cab2-400d-8120-e4450fec5cbf" TYPE="ext4"
/dev/sdb10: UUID="D1WNh2-2nXE-12p7-NMC1-qt4N-VRCj-kbJr0h" TYPE="LVM2_member"
/dev/mapper/vg_xenon-lv_root: UUID="6fb0fd20-1a22-485c-9dd6-0fc896690bae" TYPE="ext4"
/dev/mapper/vg_xenon-lv_swap: UUID="5bc1bde2-e266-49a9-b26f-3268bef87d6c" TYPE="swap"
== END blkid ==
== BEGIN cat /proc/mdstat ==
Personalities :
unused devices: <none>
== END cat /proc/mdstat ==
== BEGIN pvs ==
PV VG Fmt Attr PSize PFree
/dev/sdb10 vg_xenon lvm2 a-- 19.39g 0
== END pvs ==
== BEGIN vgs ==
VG #PV #LV #SN Attr VSize VFree
vg_xenon 1 2 0 wz--n- 19.39g 0
== END vgs ==
== BEGIN lvs ==
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
lv_root vg_xenon -wi-ao 17.44g
lv_swap vg_xenon -wi-ao 1.95g
== END lvs ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-devel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-devel-2.6.32-220.7.1.el6.x86_64
kernel-devel-2.6.32-220.el6.x86_64
kernel-firmware-2.6.32-220.7.1.el6.centos.plus.noarch
kernel-headers-2.6.32-220.7.1.el6.centos.plus.x86_64
== END rpm -qa kernel\* | sort ==
== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
== END lspci -nn ==
== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 064e:c108 Suyin Corp.
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
== END lsusb ==
== BEGIN rpm -qa kmod\* kmdl\* ==
== END rpm -qa kmod\* kmdl\* ==
== BEGIN ifconfig -a ==
eth0 Link encap:Ethernet HWaddr 00:1E:EC:31:20:A2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2566 (2.5 KiB) TX bytes:2566 (2.5 KiB)
== END ifconfig -a ==
== BEGIN brctl show ==
bridge name bridge id STP enabled interfaces
== END brctl show ==
== BEGIN route -n ==
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 0.0.0.0 0.0.0.0 U 2 0 0 wlan0
0.0.0.0 0.0.0.0 0.0.0.0 UG 0 0 0 wlan0
== END route -n ==
== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search linux
nameserver 0.0.0.0
== END cat /etc/resolv.conf ==
== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
matahari-network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==[/code]
Also here is the link to xorg.log file as under for more information. Your guidance & help will be highly appreciated.
[url=http://www.box.com/s/c534e7d9cd51da50ee75]http://www.box.com/s/c534e7d9cd51da50ee75[/url]
Re: intel 965 display options
Try this
[code]
yum install xorg-x11-drv-intel
cd /etc/X11
mv xorg.conf xorg.conf.20120407
[/code]
Now see what happens when you (re)start your X environment.
[code]
yum install xorg-x11-drv-intel
cd /etc/X11
mv xorg.conf xorg.conf.20120407
[/code]
Now see what happens when you (re)start your X environment.
Re: intel 965 display options
[quote]
TrevorH wrote:
Try this
[code]
yum install xorg-x11-drv-intel
cd /etc/X11
mv xorg.conf xorg.conf.20120407
[/code]
Now see what happens when you (re)start your X environment.[/quote]
Nothing happened :). As these are kernel mode drivers, so if i try this package [b]xorg-x11-drv-intel-2.18.0-1.fc17.x86_64.rpm[/b] then what would be the consequences? Fatal? If not fatal to corrupt the installation then may I try those? I know that the drivers shipped with [u]kernel 2.6.35[/u] were fine.
[quote][root@xenon X11]# yum install xorg-x11-drv-intel
Loaded plugins: fastestmirror, priorities, refresh-packagekit, security
Repository google-chrome is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirror.averse.net
* rpmforge: ftp-stud.fht-esslingen.de
* updates: mirror.averse.net
adobe-linux-x86_64 | 951 B 00:00
base | 3.7 kB 00:00
epel | 4.0 kB 00:00
epel/primary_db | 4.3 MB 00:34
google-chrome | 951 B 00:00
rpmforge | 1.1 kB 00:00
updates | 3.5 kB 00:00
1232 packages excluded due to repository priority protections
Setting up Install Process
Package xorg-x11-drv-intel-2.16.0-1.el6.x86_64 already installed and latest version
Nothing to do
[/quote]
TrevorH wrote:
Try this
[code]
yum install xorg-x11-drv-intel
cd /etc/X11
mv xorg.conf xorg.conf.20120407
[/code]
Now see what happens when you (re)start your X environment.[/quote]
Nothing happened :). As these are kernel mode drivers, so if i try this package [b]xorg-x11-drv-intel-2.18.0-1.fc17.x86_64.rpm[/b] then what would be the consequences? Fatal? If not fatal to corrupt the installation then may I try those? I know that the drivers shipped with [u]kernel 2.6.35[/u] were fine.
[quote][root@xenon X11]# yum install xorg-x11-drv-intel
Loaded plugins: fastestmirror, priorities, refresh-packagekit, security
Repository google-chrome is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirror.averse.net
* rpmforge: ftp-stud.fht-esslingen.de
* updates: mirror.averse.net
adobe-linux-x86_64 | 951 B 00:00
base | 3.7 kB 00:00
epel | 4.0 kB 00:00
epel/primary_db | 4.3 MB 00:34
google-chrome | 951 B 00:00
rpmforge | 1.1 kB 00:00
updates | 3.5 kB 00:00
1232 packages excluded due to repository priority protections
Setting up Install Process
Package xorg-x11-drv-intel-2.16.0-1.el6.x86_64 already installed and latest version
Nothing to do
[/quote]