Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
Hello Friends,
I bought a new system (PC) with following Hardware configuration:
Processor : Intel Pentium Dual CPU E2160 @ 1.80GHz
Motherboard : 945GCM-S2L (Gigabyte Technology)
Videocard : Intel 82945G Express Chipset Family
DDR2 RAM : 1 GB
Hard Disk : 160 GB
Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
I downloaded CentOS Release 5.2 (Final), Kernel 2.6.18-92 (x86_64 bit)
from centos.org and installed it. But the NIC card is not configured.
I have a doubt, whether the CentOS will support NIC (Atheros L1 Gigabit)
or not? Can you please suggest me, from where I download the above
mentioned NIC driver and how to proceed ?
Thanks in advance. Regards, Govind.
I bought a new system (PC) with following Hardware configuration:
Processor : Intel Pentium Dual CPU E2160 @ 1.80GHz
Motherboard : 945GCM-S2L (Gigabyte Technology)
Videocard : Intel 82945G Express Chipset Family
DDR2 RAM : 1 GB
Hard Disk : 160 GB
Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
I downloaded CentOS Release 5.2 (Final), Kernel 2.6.18-92 (x86_64 bit)
from centos.org and installed it. But the NIC card is not configured.
I have a doubt, whether the CentOS will support NIC (Atheros L1 Gigabit)
or not? Can you please suggest me, from where I download the above
mentioned NIC driver and how to proceed ?
Thanks in advance. Regards, Govind.
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
Hi,
I am sure one of the modules: [b]atl1[/b] or [b]atl1e[/b] will handle this card.
Since atl1 is CentOS kernel already, I am suggesting atl1e. The problem is that this driver was released very recently (Sep 2008) and is in kernel 2.6.26-something, so for eg. Fedora 9 fully up to date can see your LAN adapter, but Fedora 9 Live cannot. Also CentOS with 2.6.18 cannot handle it.
Same Attansic Atheros PCI-E 1Gb LAN card is in ASUS P5Q motherboard, but unfortunately on their Support page there are no drivers for it, and should be. Same card is in some of ASUS Eee PC.
I have been looking for this driver and found it somewhere on the P5KPL-CM Support page in version 1.0.0.4, I don't know if it is most recent Linux driver but it seem to work.
I have attached it to this post, also you can download it from here:
[url=http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5KPL-CM/LinuxDrivers.zip]http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5KPL-CM/LinuxDrivers.zip[/url]
For my card lspci shows:
Ethernet controller: Attansic Technology Corp. Unknown device 1026 (rev b0)
this if ASUS P5Q motherboard and atl1e works after I have compiled sources from directory L1e_lan and installed
Hope this helps,
JanS
I am sure one of the modules: [b]atl1[/b] or [b]atl1e[/b] will handle this card.
Since atl1 is CentOS kernel already, I am suggesting atl1e. The problem is that this driver was released very recently (Sep 2008) and is in kernel 2.6.26-something, so for eg. Fedora 9 fully up to date can see your LAN adapter, but Fedora 9 Live cannot. Also CentOS with 2.6.18 cannot handle it.
Same Attansic Atheros PCI-E 1Gb LAN card is in ASUS P5Q motherboard, but unfortunately on their Support page there are no drivers for it, and should be. Same card is in some of ASUS Eee PC.
I have been looking for this driver and found it somewhere on the P5KPL-CM Support page in version 1.0.0.4, I don't know if it is most recent Linux driver but it seem to work.
I have attached it to this post, also you can download it from here:
[url=http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5KPL-CM/LinuxDrivers.zip]http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5KPL-CM/LinuxDrivers.zip[/url]
For my card lspci shows:
Ethernet controller: Attansic Technology Corp. Unknown device 1026 (rev b0)
this if ASUS P5Q motherboard and atl1e works after I have compiled sources from directory L1e_lan and installed
Hope this helps,
JanS
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
My attachment was stopped by an size error. Hope now it will be delivered.
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
I am having this exact same problem. The link above is included with the mobo P5Q PRO. This needs to be compiled with gcc. gcc did not install. now I am in rpm hell.
compat-gcc-34-3.4.6-4.x86_64.rpm requires glibc-devel>= 2.2.90-12
and this rpm I cannot seem to find... rpm search comes up with many links all of which are dead!! glibc-devel is not on any of the 7 disk for centos5.2 install. (or I haven't found it yet. and I'm sure this will have it's own dependencies)
not sure what to do from here. I need to get gcc going 1st.
any suggestions?
Thanks!
Andrew :-?
compat-gcc-34-3.4.6-4.x86_64.rpm requires glibc-devel>= 2.2.90-12
and this rpm I cannot seem to find... rpm search comes up with many links all of which are dead!! glibc-devel is not on any of the 7 disk for centos5.2 install. (or I haven't found it yet. and I'm sure this will have it's own dependencies)
not sure what to do from here. I need to get gcc going 1st.
any suggestions?
Thanks!
Andrew :-?
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
What am I missing from my build environment? I can't seem to get this driver installed.
[root@S01060004e2d733c3 atheros]# uname -r
2.6.18-92.1.10.el5_lustre.1.6.6smp
[root@S01060004e2d733c3 atheros]# uname -a
Linux S01060004e2d733c3 2.6.18-92.1.10.el5_lustre.1.6.6smp #1 SMP Tue Aug 26 12:16:17 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@S01060004e2d733c3 atheros]#
[root@S01060004e2d733c3 atheros]# which gcc
/usr/bin/gcc
[root@S01060004e2d733c3 atheros]# gcc -v
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --enable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)
[root@S01060004e2d733c3 atheros]#
Here it is failing to build.
root@S01060004e2d733c3 src]# ls
at_ethtool.c at.h at_hw.c at_hw.h atl1e.mod.c at_main.c at_osdep.h at_param.c kcompat.c kcompat_ethtool.c kcompat.h Makefile
[root@S01060004e2d733c3 src]# make
Makefile:170: *** *** Aborting the build. *** This driver is not supported on kernel versions older than 2.4.0. Stop.
[root@S01060004e2d733c3 src]#
I have even gone so far as to comment out parts of the makefile.
[root@S01060004e2d733c3 atheros]# uname -r
2.6.18-92.1.10.el5_lustre.1.6.6smp
[root@S01060004e2d733c3 atheros]# uname -a
Linux S01060004e2d733c3 2.6.18-92.1.10.el5_lustre.1.6.6smp #1 SMP Tue Aug 26 12:16:17 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@S01060004e2d733c3 atheros]#
[root@S01060004e2d733c3 atheros]# which gcc
/usr/bin/gcc
[root@S01060004e2d733c3 atheros]# gcc -v
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --enable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)
[root@S01060004e2d733c3 atheros]#
Here it is failing to build.
root@S01060004e2d733c3 src]# ls
at_ethtool.c at.h at_hw.c at_hw.h atl1e.mod.c at_main.c at_osdep.h at_param.c kcompat.c kcompat_ethtool.c kcompat.h Makefile
[root@S01060004e2d733c3 src]# make
Makefile:170: *** *** Aborting the build. *** This driver is not supported on kernel versions older than 2.4.0. Stop.
[root@S01060004e2d733c3 src]#
I have even gone so far as to comment out parts of the makefile.
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
I have two boxes that need this driver working. The other of course contains the stock kernel that I am still trying to install the kernel source on.
- AlanBartlett
- Forum Moderator
- Posts: 9345
- Joined: 2007/10/22 11:30:09
- Location: ~/Earth/UK/England/Suffolk
- Contact:
Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base
[quote]I have two boxes that need this driver working. The other of course contains the stock kernel that I am still trying to install the kernel source on.[/quote]
The [url=http://wiki.centos.org/HowTos#head-dd8d94c4485b015477e28031bba1b51e7224c2fa]CentOS wiki[/url] is your friend.
Regarding your previous post, #5, I have absolutely no idea -- as you have not provided a link to the source code you are trying to compile! :roll:
The [i]only[/i] link mentioned in this thread is in post #2 and when that is investigated, it is found to contain files for a certain [i]M$[/i] "product":
[code]
$ ls
l1e-l2e-linux-v1.0.0.4.rar ldistrib.txt readme
$ file *
l1e-l2e-linux-v1.0.0.4.rar: RAR archive data, v1d, os: Win32
ldistrib.txt: ASCII English text, with CRLF line terminators
readme: ASCII English text, with CRLF line terminators
[/code]
The [url=http://wiki.centos.org/HowTos#head-dd8d94c4485b015477e28031bba1b51e7224c2fa]CentOS wiki[/url] is your friend.
Regarding your previous post, #5, I have absolutely no idea -- as you have not provided a link to the source code you are trying to compile! :roll:
The [i]only[/i] link mentioned in this thread is in post #2 and when that is investigated, it is found to contain files for a certain [i]M$[/i] "product":
[code]
$ ls
l1e-l2e-linux-v1.0.0.4.rar ldistrib.txt readme
$ file *
l1e-l2e-linux-v1.0.0.4.rar: RAR archive data, v1d, os: Win32
ldistrib.txt: ASCII English text, with CRLF line terminators
readme: ASCII English text, with CRLF line terminators
[/code]
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
I've placed the current version (v1.0.1.0) of the atl1e driver source code at ftp://ftp.hogchain.net/pub/linux/attansic/atl1e/l1e-1.0.1.0.tar.gz. It builds and installs cleanly (I'm using it right now).
[code][root@gadwall ~]# ethtool -i eth1
driver: ATL1e
version: 1.0.1.0
firmware-version: L1e
bus-info: 0000:03:00.0
[root@gadwall ~]# uname -a
Linux gadwall 2.6.18-92.1.18.el5 #1 SMP Wed Nov 12 09:19:49 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
[/code]
[code][root@gadwall ~]# ethtool -i eth1
driver: ATL1e
version: 1.0.1.0
firmware-version: L1e
bus-info: 0000:03:00.0
[root@gadwall ~]# uname -a
Linux gadwall 2.6.18-92.1.18.el5 #1 SMP Wed Nov 12 09:19:49 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
[/code]
- AlanBartlett
- Forum Moderator
- Posts: 9345
- Joined: 2007/10/22 11:30:09
- Location: ~/Earth/UK/England/Suffolk
- Contact:
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
As a result of [b]jcliburn[/b] making the [i]atl1e[/i] driver source code available, I have now been able to build it as a kABI tracking kmod rpm package which can be downloaded from [url=http://www.pperry.f2s.com/linux/ajb/atl1e/]here[/url].
For anyone having problems with the [i]Atheros L1 Gigabit NIC[/i], please download the kmod rpm that matches your system architecture (32 - or 64-bit) and kernel type. It can then be installed with a [b]rpm -ivh kmod-atl1e-*.rpm[/b] command (and then forgotten) for the life of [i]CentOS 5[/i].
For anyone having problems with the [i]Atheros L1 Gigabit NIC[/i], please download the kmod rpm that matches your system architecture (32 - or 64-bit) and kernel type. It can then be installed with a [b]rpm -ivh kmod-atl1e-*.rpm[/b] command (and then forgotten) for the life of [i]CentOS 5[/i].
Re: Ethernet (NIC) : Atheros L1 Gigabit Ethernet 10/100/1000Base-T
I also built Centos 2.6.18-92.1.18.el5 kmod-atl1e rpms for i686 and x86_64. You can find them on [url=ftp://ftp.hogchain.net/pub/linux/attansic/atl1e/]my ftp site[/url].