Hello,
i need help.
You need to now: I have CentOs 6.2
1. i have no network connection because .ko file is missing in kernel file system
2. i can't use USB sticks because Linux cant detect vfat or ext2-ext4
Why is that?
I tried to istall the ath9k driver to get WLAN to work. I found a couple of How To's and forum topics and followd them.
Using make in /usr/src/kernels/2.../ did not work...
I got the following output:
[quote]
...
make[1]: *** Keine Regel, um >>missing-syscalls<< zu erstellen. Schluss.
[/quote]
Means: No Rule, to make missing-syscalls. End.
So i tried to install the Kernel anew. Did not work it always said Kernel is already installed. So i thought about taking a new installation file but then i noticed i cant use USB, so i tried FTP over a Lan-Connection, and i found eth0 not usable ... i cant start it
So i tried formatting the usb key to the ext2 filesystem... Linux coudlnt detect that eather.
I want to solve it without reinstalling CentOS because i have some Data that i really need.
Does anyone have an idea how i can eather
- get USB working
- get eth0 working or
- get the kernel installed without usb, eth0 :-?
I appreciate your help.
Nomara
EDIT: Cant i just remove the installed kernel and install it new? Or would that kinda break everything?
Broken Kernel, missing .ko data, make not possible
Broken Kernel, missing .ko data, make not possible
I am pretty sure that ELRepo has a driver for the ath9k chips.
You'd need to post the output from the last few lines of `dmesg` after inserting the USB stick in order to gain any clue as to what's going on with that but I can say that CentOS definitely supports all of vfat and ext[2-4] out of the box so the problem is not with supported file systems.
You'd need to post the output from the last few lines of `dmesg` after inserting the USB stick in order to gain any clue as to what's going on with that but I can say that CentOS definitely supports all of vfat and ext[2-4] out of the box so the problem is not with supported file systems.
WLAN does not show
Hi,
solved a couple of problems by installing centos again.
Wlan still not working.
I have compactPCI from MEN and a WLAN/3G Module from Option (GTM671W)
lspci semms to know the MEN Module and
lsusb detects Option
[quote]lsusb
Bus 002 device 002: ID 0af0:8900 Option
[/quote]
[quote]lsmod
...
ath9k ... 0
mac88211 ... 1 ath9k
...
[/quote]
I have no connection to internet. I need to get WLAN work.
[quote]nmclie nm
status-not connectet
wlan-active
...
[/quote]
Any idias to how it will work?
solved a couple of problems by installing centos again.
Wlan still not working.
I have compactPCI from MEN and a WLAN/3G Module from Option (GTM671W)
lspci semms to know the MEN Module and
lsusb detects Option
[quote]lsusb
Bus 002 device 002: ID 0af0:8900 Option
[/quote]
[quote]lsmod
...
ath9k ... 0
mac88211 ... 1 ath9k
...
[/quote]
I have no connection to internet. I need to get WLAN work.
[quote]nmclie nm
status-not connectet
wlan-active
...
[/quote]
Any idias to how it will work?