I virtualized 2 servers. Both servers share the same default gw, route. When I enable both NICs, only one is accessible.
NIC 1 IP = 1.32.211.58
NIC 2 IP = 1.32.211.59
default gw = 1.32.211.57
Code: Select all
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 1.32.211.57 0.0.0.0 UG 100 0 0 enp0s8
0.0.0.0 1.32.211.57 0.0.0.0 UG 101 0 0 enp0s9
1.32.211.56 0.0.0.0 255.255.255.248 U 100 0 0 enp0s8
1.32.211.56 0.0.0.0 255.255.255.248 U 101 0 0 enp0s9
192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 enp0s3
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
I'm totally stumped.