Hello everyone, On my laptop does not working wifi. (bluetooth also does not work)
lspci shows name adapter mt7630e
What do i do to make it work?
(it's my first linux OS)
Sorry me, for my English)
wifi does not working [mt7630e]
Re: wifi does not working [mt7630e]
Post the output from lspci -nn | grep -i net and make sure the vendor and device id is listed there.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: wifi does not working [mt7630e]
I have the same problem.
[cagatayemre@localhost ~]$ lspci -nn | grep -i net
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 0a)
05:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
[cagatayemre@localhost ~]$
[cagatayemre@localhost ~]$ rpm -q NetworkManager-wifi
NetworkManager-wifi-1.8.0-9.el7.x86_64
[cagatayemre@localhost ~]$ lspci -nn | grep -i net
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 0a)
05:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
[cagatayemre@localhost ~]$
[cagatayemre@localhost ~]$ rpm -q NetworkManager-wifi
NetworkManager-wifi-1.8.0-9.el7.x86_64
Re: wifi does not working [mt7630e]
What does lsmod | grep -i rtl8723be say? If there's no output try modprobe rtl8723be
What is the output from ip link show
What is the output from ip link show
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Re: wifi does not working [mt7630e]
[cagatayemre@localhost ~]$ lsmod | grep -i rtl8723beTrevorH wrote:What does lsmod | grep -i rtl8723be say? If there's no output try modprobe rtl8723be
What is the output from ip link show
rtl8723be 89567 0
btcoexist 50471 1 rtl8723be
rtl8723_common 23563 1 rtl8723be
rtl_pci 26618 1 rtl8723be
rtlwifi 70428 2 rtl_pci,rtl8723be
mac80211 705794 3 rtl_pci,rtlwifi,rtl8723be
[cagatayemre@localhost ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether c8:d3:ff:cc:18:41 brd ff:ff:ff:ff:ff:ff
3: wlo1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000
link/ether a2:b2:46:62:5c:6c brd ff:ff:ff:ff:ff:ff
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT qlen 1000
link/ether 52:54:00:08:aa:78 brd ff:ff:ff:ff:ff:ff
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN mode DEFAULT qlen 1000
link/ether 52:54:00:08:aa:78 brd ff:ff:ff:ff:ff:ff
6: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
link/ether 02:42:147b:f3 brd ff:ff:ff:ff:ff:ff
[cagatayemre@localhost ~]$
Re: wifi does not working [mt7630e]
I recently struggled with Mint and a different USB adapter fixed my problem.
run iwconfig and see if it helps you diagnose it better.
run iwconfig and see if it helps you diagnose it better.
Re: wifi does not working [mt7630e]
I run IP configuration but a new problem occured. Wifi is not persistant. Its opening and after an hour its closing. Something wrong about activation of wifi. Help please. Thanks. These are my configurations.
root@localhost cagatayemre]# ip link set eth0 up
Cannot find device "eth0"
Vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO=static
ONBOOT=yes
TYPE="Ethernet"
IPADDR=192.168.122.1
NAME="System eth0"
HWADDR=52:54:00:08:aa:78
NM_CONTROLLED=no
vi /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=Hostname
GATEWAY=10.0.0.254
vi /etc/resolv.conf
nameserver 8.8.8.8
nameserver 8.8.4.4
root@localhost cagatayemre]# ip link set eth0 up
Cannot find device "eth0"
Vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO=static
ONBOOT=yes
TYPE="Ethernet"
IPADDR=192.168.122.1
NAME="System eth0"
HWADDR=52:54:00:08:aa:78
NM_CONTROLLED=no
vi /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=Hostname
GATEWAY=10.0.0.254
vi /etc/resolv.conf
nameserver 8.8.8.8
nameserver 8.8.4.4