I've been trying to configure a IPv6 setup on one of my VPS, its new build since i've decided to rule everything else out than my mistakes! So I'm using IPv4 and IPv6 but would really like to drop 4 and just use 6 if i can.
The plan is to offer dedicated IPv6 on this server to clients via cPanel. So here's my current setup, any ideas what's wrong;
Code: Select all
[root@voyager network-scripts]# cat ifcfg-eth0
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="eth0"
UUID="6fbce7a4-5559-4283-a738-44e36f071d37"
DEVICE="eth0"
ONBOOT="yes"
IPADDR="xxx.xxx.xxx.xxx"
PREFIX="26"
GATEWAY="xxx.xxx.xxx.xxx"
DNS1="8.8.8.8"
DNS2="8.8.4.4"
IPV6_PRIVACY="no"
IPV6ADDR="2a02:5300:1:6::2/64"
DNS3="2001:4860:4860::8888"
DNS4="2001:4860:4860::8844"
IPV6_PEERDNS="no"
[root@voyager network-scripts]#