MothoerBoard : Asrock B450 Pro4
CPU : Athlon 200GE
3.10.0-862.el7.x86_64 - Boot OK
after yum update select 3.10.0-975.12.1.el7.x86_64
Screen is dark.
Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
- IkumiMashiba
- Posts: 5
- Joined: 2019/05/13 00:06:10
Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
- Attachments
-
- 200ge.png (214.55 KiB) Viewed 2830 times
Re: Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
Hummmmm. Not quite sure what to make of this. The 3.10.0-862.el7.x86_64 kernel is associated with the CentOS 7.5 release, and that was the ORIGINAL kernel at that, not one of the several kernels that were released after 7.5 was out and before 7.6 -- the current version -- was released. Indeed the current kernel release is 3.10.0-975.12.2.el7.x86_64. Given that you have apparently have only updated your machine ONCE since 7.5 came out there could be any number of reasons for your machine problems. Best advice: Download a new copy of 7.6, install it, and the UPDATE it right after you have done the re-install. This way you will have all the latest drivers, etc., etc., etc., etc. If after you do the re-install with a fresh copy of 7.6 -- not 7.5 -- if you still get a black screen then one of the Gurus here can probably give you some advice, provide you with a hack, or some other such thing.IkumiMashiba wrote: ↑2019/05/13 01:48:27MothoerBoard : Asrock B450 Pro4
CPU : Athlon 200GE
3.10.0-862.el7.x86_64 - Boot OK
after yum update select 3.10.0-975.12.1.el7.x86_64
Screen is dark.
Best Fishes
- IkumiMashiba
- Posts: 5
- Joined: 2019/05/13 00:06:10
Re: Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
Thank you for the advice.
I will try on a holiday. And write a report.
I will try on a holiday. And write a report.
- IkumiMashiba
- Posts: 5
- Joined: 2019/05/13 00:06:10
Re: Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
I tried a new one
CentOS-7-x86_64-Minimal-1810.iso It does not Boot
CentOS-7-x86_64-Minimal-1902-01.iso It does not Boot
CentOS will black out after this ;<
CentOS-7-x86_64-Minimal-1810.iso It does not Boot
CentOS-7-x86_64-Minimal-1902-01.iso It does not Boot
CentOS will black out after this ;<
Re: Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
Pick the basic video option off the troubleshooting menu when you first boot.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
- IkumiMashiba
- Posts: 5
- Joined: 2019/05/13 00:06:10
Re: Do not boot Athlon 200GE(3.10.0-975.12.1.el7.x86_64)
CentOS-7-x86_64-Minimal-1902-01.iso
Troubleshooting - Install CentOS7 in basic graphics mode is successful.
I used HDMI output.
after yum update select 3.10.0-957.12.2.el7.x86_64
It booted.
@TrevorH Thank you for the advice.
Troubleshooting - Install CentOS7 in basic graphics mode is successful.
I used HDMI output.
after yum update select 3.10.0-957.12.2.el7.x86_64
It booted.
@TrevorH Thank you for the advice.