Hewlet Packard DL380 Support

Issues related to hardware problems
Post Reply
jjrowan
Posts: 114
Joined: 2005/09/10 13:07:15
Contact:

Hewlet Packard DL380 Support

Post by jjrowan » 2019/10/01 19:53:29

I've been away for a while, saw 8 released and pulled my DL380 out of storage, it's my only 64 bit server. Booted from CD to run an install from NFS but it doesn't recognize the SCSI drives. I looked at the removed hardware list and HP (Compaq) isn't listed there. I know SCSI is very old tech, I toyed with the idea of buying an HP gen 7 or gen 8 device off eBay but don't want to spend the money if HP servers aren't supported.

lightman47
Posts: 1002
Joined: 2014/05/21 20:16:00
Location: Central New York, USA

Re: Hewlet Packard DL380 Support

Post by lightman47 » 2019/10/01 21:45:54

just 'recycled' my 380 room-heater at the local landfill. CentOS 7.6 was too advanced for it. Lost support for AMD drivers and more.

'RIP'
Oops - G5
Last edited by lightman47 on 2019/10/02 11:11:43, edited 1 time in total.
Multple login IDs are not your friend when asking for help!

hunter86_bg
Posts: 1929
Joined: 2015/02/17 15:14:33
Location: Bulgaria
Contact:

Re: Hewlet Packard DL380 Support

Post by hunter86_bg » 2019/10/02 07:07:49

jjrowan wrote:
2019/10/01 19:53:29
I've been away for a while, saw 8 released and pulled my DL380 out of storage, it's my only 64 bit server. Booted from CD to run an install from NFS but it doesn't recognize the SCSI drives. I looked at the removed hardware list and HP (Compaq) isn't listed there. I know SCSI is very old tech, I toyed with the idea of buying an HP gen 7 or gen 8 device off eBay but don't want to spend the money if HP servers aren't supported.
What generation is your system ?
I know that gen 9 and gen 10 are fully supported.

Diglet
Posts: 6
Joined: 2018/06/09 21:02:12

Re: Hewlet Packard DL380 Support

Post by Diglet » 2019/10/02 23:31:17

CentOS 8 runs without problem on my DL380 G7 and DL360 G7 servers. The only incompatibility I had was with a NIC. I did have to replace the 10GbE NC552SFP NIC with an HP 560SFP+ NIC because the NC552SFP is no longer supported.

For Proliant servers older than G7, try adding the following switch to the kernel line: hpsa.hpsa_allow_any=1

You'll need to manually add it before the installation program loads so it recognizes the older SmartArray controller. Then you'll need to manually add it again on first boot and thereafter until you make it permanent.

To make it permanent, do not edit the grub config file directly. Execute the following two commands instead:
# grubby --update-kernel=ALL --args=hpsa.hpsa_allow_any=1
# grub2-mkconfig --output=/etc/grub2.cfg

Let me know if that works for you.

User avatar
TrevorH
Forum Moderator
Posts: 27156
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Hewlet Packard DL380 Support

Post by TrevorH » 2019/10/03 00:00:21

# grubby --update-kernel=ALL --args=hpsa.hpsa_allow_any=1
# grub2-mkconfig --output=/etc/grub2.cfg
There's no need to run the 2nd one of those, grubby already changed the file.
CentOS 6 will die in November 2020 - migrate sooner rather than later!
CentOS 5 has been EOL for nearly 3 years and should no longer be used for anything!
Full time Geek, part time moderator. Use the FAQ Luke

hunter86_bg
Posts: 1929
Joined: 2015/02/17 15:14:33
Location: Bulgaria
Contact:

Re: Hewlet Packard DL380 Support

Post by hunter86_bg » 2019/10/07 08:56:34

lightman47 wrote:
2019/10/01 21:45:54
just 'recycled' my 380 room-heater at the local landfill. CentOS 7.6 was too advanced for it. Lost support for AMD drivers and more.

'RIP'
Oops - G5
Maybe you should have checked if openBSD still supports it.
Of course, having another room-heater is fine as long as the noise is acceptable.

lightman47
Posts: 1002
Joined: 2014/05/21 20:16:00
Location: Central New York, USA

Re: Hewlet Packard DL380 Support

Post by lightman47 » 2019/10/07 11:48:56

Heh - would that was all that went wrong with it. The final straw was losing the two power supplies to two separate 'dirty' power outages here; shipping cost as much as replacement supplies. ;)
Multple login IDs are not your friend when asking for help!

Post Reply

Return to “CentOS 8 - Hardware Support”