intel 965 display options

General support questions

intel 965 display options

Postby Opus » 2012/04/05 13:35:16

Hello,
After installation of the CentOS 6.2 I noticed that I can't change resolution of my display beyond 1024x786 61Hz. Why is that so, that I am stuck with 1024x786, while my old laptop screen has default resolution of 1280x800 at 60Hz in Windows 7 and Ubuntu? My display driver is Intel 965 graphics controller. I checked via following commands


[root@centos X11]# cat /etc/X11/xorg.conf | more
Section "Device"
Identifier "Videocard0"
Driver "vesa"
EndSection



[root@centos X11]# xrandr -q
Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.0*
800x600 61.0


My question is how can I change the max resolution to 1280x800 so that whenever I boot I get my desirable resolution? Your help will be much appreciated.
Opus
 
Posts: 18
Joined: 2012/03/24 06:15:52

Re: intel 965 display options

Postby TrevorH » 2012/04/05 15:37:42

Try just moving /etc/X11/xorg.conf out of the way - it's meant to no longer be needed and it may be confusing the issue.
User avatar
TrevorH
Forum Moderator
 
Posts: 9166
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: intel 965 display options

Postby Opus » 2012/04/05 18:32:28

Ok then where should I enter the configuration of my display to make 1280x800 at 59 Hz the default value instead of 1024x768?
Opus
 
Posts: 18
Joined: 2012/03/24 06:15:52

intel 965 display options

Postby pschaff » 2012/04/05 21:13:01

You should not have to enter the configuration manually. If the adapter supports the desired resolution it should be a choice in the GUI Display configuration. You should be able to see the available modes with xrandr. If the desired mode is not present the ELRepo xorg-x11-drv-intel package may be worth a try.

If more help is needed then please provide more information about your system by running "./getinfo.sh" and showing us the output file.
pschaff
Retired Moderator
 
Posts: 18277
Joined: 2006/12/13 20:15:34
Location: Tidewater, Virginia, North America

Re: intel 965 display options

Postby Opus » 2012/04/06 07:35:36

pschaff wrote:
You should not have to enter the configuration manually. If the adapter supports the desired resolution it should be a choice in the GUI Display configuration. You should be able to see the available modes with xrandr. If the desired mode is not present the ELRepo xorg-x11-drv-intel package may be worth a try.

If more help is needed then please provide more information about your system by running "./getinfo.sh" and showing us the output file.


OK instead of all the lengthy output I have pasted the relevant info as under:

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-devel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-devel-2.6.32-220.7.1.el6.x86_64
kernel-devel-2.6.32-220.el6.x86_64
kernel-firmware-2.6.32-220.7.1.el6.centos.plus.noarch
kernel-headers-2.6.32-220.7.1.el6.centos.plus.x86_64
== END rpm -qa kernel\* | sort ==

== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
== END lspci -nn ==

== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 064e:c108 Suyin Corp.
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
== END lsusb ==

Though I'll check that repo you mentioned and update. Thanks for reply
Opus
 
Posts: 18
Joined: 2012/03/24 06:15:52

Re: intel 965 display options

Postby TrevorH » 2012/04/06 10:48:12

You probably don't even need the newer version of xorg-x11-drv-intel that's in ELRepo - is it already installed and if not, try installing it from the CentOS repos first.
User avatar
TrevorH
Forum Moderator
 
Posts: 9166
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: intel 965 display options

Postby pschaff » 2012/04/06 10:50:50

That's hardly all the relevant information. The kernel you are running, at the top of the output is highly relevant, and the repo configs may be as well.

I agree with Trevor that the ELRepo packages are only needed if things are not working correctly.
pschaff
Retired Moderator
 
Posts: 18277
Joined: 2006/12/13 20:15:34
Location: Tidewater, Virginia, North America

Re: intel 965 display options

Postby Opus » 2012/04/07 18:44:52

pschaff wrote:
That's hardly all the relevant information. The kernel you are running, at the top of the output is highly relevant, and the repo configs may be as well.

I agree with Trevor that the ELRepo packages are only needed if things are not working correctly.


OK here is the complete output of the file, though EPEL repo is already enabled.

Information for general problems.
Code: Select all
== BEGIN uname -rmi ==
2.6.32-220.7.1.el6.centos.plus.x86_64 x86_64 x86_64
== END   uname -rmi ==

== BEGIN rpm -qa \*-release\* ==
rpmforge-release-0.5.2-2.el6.rf.x86_64
epel-release-6-5.noarch
centos-release-6-2.el6.centos.7.x86_64
adobe-release-x86_64-1.0-1.noarch
== END   rpm -qa \*-release\* ==

== BEGIN cat /etc/redhat-release ==
CentOS release 6.2 (Final)
== END   cat /etc/redhat-release ==

== BEGIN getenforce ==
Enforcing
== END   getenforce ==

== BEGIN free -m ==
             total       used       free     shared    buffers     cached
Mem:          1997       1857        139          0        159        532
-/+ buffers/cache:       1165        831
Swap:         1999          0       1999
== END   free -m ==

== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.6.6-29.el6.x86_64
rpm-build-4.8.0-19.el6_2.1.x86_64
rpm-libs-4.8.0-19.el6_2.1.x86_64
rpm-python-4.8.0-19.el6_2.1.x86_64
yum-3.2.29-22.el6.centos.2.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-10.el6.noarch
yum-plugin-priorities-1.1.30-10.el6.noarch
yum-plugin-security-1.1.30-10.el6.noarch
yum-utils-1.1.30-10.el6.noarch
== END   rpm -qa yum\* rpm-\* python | sort ==

== BEGIN ls /etc/yum.repos.d ==
adobe-linux-x86_64.repo
atrpms-bleeding.repo
atrpms.repo
atrpms.repo~
atrpms-testing.repo
CentOS-Base.repo
CentOS-Base.repo~
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Media.repo~
epel.repo
epel.repo~
epel-testing.repo
google-chrome.repo
google.repo
linuxtech.repo
linuxtech.repo~
mirrors-rpmforge
mirrors-rpmforge-extras
mirrors-rpmforge-testing
rpmforge.repo
rpmforge.repo~
== END   ls /etc/yum.repos.d ==

== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release

#  This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
#  It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
metadata_expire=60m

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d

== END   cat /etc/yum.conf ==

== BEGIN yum repolist all ==
Loaded plugins: fastestmirror, priorities, refresh-packagekit, security
Repository google-chrome is listed more than once in the configuration
Loading mirror speeds from cached hostfile
 * base: mirror.averse.net
 * rpmforge: fr2.rpmfind.net
 * updates: mirror.averse.net
1218 packages excluded due to repository priority protections
repo id                   repo name                         status
adobe-linux-x86_64        Adobe Systems Incorporated        enabled:           2
atrpms                    Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-bleeding           Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-bleeding-debuginfo Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-bleeding-source    Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-debuginfo          Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-source             Red Hat Enterprise Linux 6.2 - x8 disabled
atrpms-testing            Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-testing-debuginfo  Red Hat Enterprise Linux 6 - x86_ disabled
atrpms-testing-source     Red Hat Enterprise Linux 6 - x86_ disabled
base                      CentOS-6 - Base                   enabled:    6,208+86
c6-media                  CentOS-6 - Media                  disabled
centosplus                CentOS-6 - Plus                   disabled
contrib                   CentOS-6 - Contrib                disabled
debug                     CentOS-6 - Debuginfo              disabled
epel                      Extra Packages for Enterprise Lin enabled:       7,175
epel-debuginfo            Extra Packages for Enterprise Lin disabled
epel-source               Extra Packages for Enterprise Lin disabled
epel-testing              Extra Packages for Enterprise Lin disabled
epel-testing-debuginfo    Extra Packages for Enterprise Lin disabled
epel-testing-source       Extra Packages for Enterprise Lin disabled
extras                    CentOS-6 - Extras                 disabled
google-chrome             google-chrome                     enabled:           3
linuxtech-backports       LinuxTECH.NET el6 backports repo  disabled
linuxtech-release         LinuxTECH.NET el6 production repo disabled
linuxtech-testing         LinuxTECH.NET el6 testing repo    disabled
rpmforge                  RHEL 6 - RPMforge.net - dag       enabled: 3,132+1,126
rpmforge-extras           RHEL 6 - RPMforge.net - extras    disabled
rpmforge-testing          RHEL 6 - RPMforge.net - testing   disabled
updates                   CentOS-6 - Updates                enabled:       658+3
repolist: 17,178
== END   yum repolist all ==

== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END   egrep 'include|exclude' /etc/yum.repos.d/*.repo ==

== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
priority = 3 [atrpms]
priority = 3 [epel]
== END   sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==

== BEGIN cat /etc/fstab ==

#
# /etc/fstab
# Created by anaconda on Tue Apr  3 03:36:29 2012
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_xenon-lv_root /                       ext4    defaults        1 1
UUID=1eaa6624-cab2-400d-8120-e4450fec5cbf /boot                   ext4    defaults        1 2
/dev/mapper/vg_xenon-lv_swap swap                    swap    defaults        0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
== END   cat /etc/fstab ==

== BEGIN df -h ==
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_xenon-lv_root
                       18G  6.2G   11G  38% /
tmpfs                 999M  648K  998M   1% /dev/shm
/dev/sdb9             485M   55M  406M  12% /boot
== END   df -h ==

== BEGIN fdisk -l ==
Disk /dev/mapper/vg_xenon-lv_root doesn't contain a valid partition table
Disk /dev/mapper/vg_xenon-lv_swap doesn't contain a valid partition table

Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9aef6141

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1        7180    57671680    7  HPFS/NTFS
/dev/sdb2   *        7181       38914   254897499+   f  W95 Ext'd (LBA)
/dev/sdb5            7181       14375    57793806    7  HPFS/NTFS
/dev/sdb6           14376       22208    62918541    7  HPFS/NTFS
/dev/sdb7           22209       30041    62918541    7  HPFS/NTFS
/dev/sdb8           30042       36318    50412756    7  HPFS/NTFS
/dev/sdb9           36318       36381      512000   83  Linux
/dev/sdb10          36382       38914    20339712   8e  Linux LVM

Disk /dev/mapper/vg_xenon-lv_root: 18.7 GB, 18727567360 bytes
255 heads, 63 sectors/track, 2276 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_xenon-lv_swap: 2097 MB, 2097152000 bytes
255 heads, 63 sectors/track, 254 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

== END   fdisk -l ==

== BEGIN parted -l ==
Model: ATA WDC WD3200BEVT-7 (scsi)
Disk /dev/sdb: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system  Flags
 1      1049kB  59.1GB  59.1GB  primary   ntfs         boot
 2      59.1GB  320GB   261GB   extended               boot, lba
 5      59.1GB  118GB   59.2GB  logical   ntfs
 6      118GB   183GB   64.4GB  logical   ntfs
 7      183GB   247GB   64.4GB  logical   ntfs
 8      247GB   299GB   51.6GB  logical   ntfs
 9      299GB   299GB   524MB   logical   ext4
10      299GB   320GB   20.8GB  logical                lvm


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/vg_xenon-lv_swap: 2097MB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End     Size    File system     Flags
 1      0.00B  2097MB  2097MB  linux-swap(v1)


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/vg_xenon-lv_root: 18.7GB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End     Size    File system  Flags
 1      0.00B  18.7GB  18.7GB  ext4


== END   parted -l ==

== BEGIN blkid ==
/dev/sdb1: LABEL="OS" UUID="5AFEE2BAFEE28D97" TYPE="ntfs"
/dev/sdb5: LABEL="Data" UUID="0E1888FF1888E755" TYPE="ntfs"
/dev/sdb6: LABEL="Media" UUID="242C91162C90E3D8" TYPE="ntfs"
/dev/sdb7: LABEL="Software" UUID="70A89C69A89C2F98" TYPE="ntfs"
/dev/sdb8: LABEL="Misc" UUID="CC40A2E240A2D28E" TYPE="ntfs"
/dev/sdb9: UUID="1eaa6624-cab2-400d-8120-e4450fec5cbf" TYPE="ext4"
/dev/sdb10: UUID="D1WNh2-2nXE-12p7-NMC1-qt4N-VRCj-kbJr0h" TYPE="LVM2_member"
/dev/mapper/vg_xenon-lv_root: UUID="6fb0fd20-1a22-485c-9dd6-0fc896690bae" TYPE="ext4"
/dev/mapper/vg_xenon-lv_swap: UUID="5bc1bde2-e266-49a9-b26f-3268bef87d6c" TYPE="swap"
== END   blkid ==

== BEGIN cat /proc/mdstat ==
Personalities :
unused devices: <none>
== END   cat /proc/mdstat ==

== BEGIN pvs ==
  PV         VG       Fmt  Attr PSize  PFree
  /dev/sdb10 vg_xenon lvm2 a--  19.39g    0
== END   pvs ==

== BEGIN vgs ==
  VG       #PV #LV #SN Attr   VSize  VFree
  vg_xenon   1   2   0 wz--n- 19.39g    0
== END   vgs ==

== BEGIN lvs ==
  LV      VG       Attr   LSize  Origin Snap%  Move Log Copy%  Convert
  lv_root vg_xenon -wi-ao 17.44g                                     
  lv_swap vg_xenon -wi-ao  1.95g                                     
== END   lvs ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-2.6.32-220.el6.x86_64
kernel-devel-2.6.32-220.7.1.el6.centos.plus.x86_64
kernel-devel-2.6.32-220.7.1.el6.x86_64
kernel-devel-2.6.32-220.el6.x86_64
kernel-firmware-2.6.32-220.7.1.el6.centos.plus.noarch
kernel-headers-2.6.32-220.7.1.el6.centos.plus.x86_64
== END   rpm -qa kernel\* | sort ==

== BEGIN lspci -nn ==
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
== END   lspci -nn ==

== BEGIN lsusb ==
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 064e:c108 Suyin Corp.
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
== END   lsusb ==

== BEGIN rpm -qa kmod\* kmdl\* ==
== END   rpm -qa kmod\* kmdl\* ==

== BEGIN ifconfig -a ==
eth0      Link encap:Ethernet  HWaddr 00:1E:EC:31:20:A2 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:16 Base address:0xa000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2566 (2.5 KiB)  TX bytes:2566 (2.5 KiB)



== END   ifconfig -a ==

== BEGIN brctl show ==
bridge name   bridge id      STP enabled   interfaces
== END   brctl show ==

== BEGIN route -n ==
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0       0.0.0.0         0.0.0.0      U     2      0        0 wlan0
0.0.0.0         0.0.0.0       0.0.0.0         UG    0      0        0 wlan0
== END   route -n ==

== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search linux
nameserver 0.0.0.0
== END   cat /etc/resolv.conf ==

== BEGIN grep net /etc/nsswitch.conf ==
#networks:   nisplus [NOTFOUND=return] files
#netmasks:   nisplus [NOTFOUND=return] files     
netmasks:   files
networks:   files
netgroup:   nisplus
== END   grep net /etc/nsswitch.conf ==

== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager    0:off   1:off   2:on   3:on   4:on   5:on   6:off
matahari-network   0:off   1:off   2:off   3:off   4:off   5:off   6:off
network           0:off   1:off   2:on   3:on   4:on   5:on   6:off
wpa_supplicant    0:off   1:off   2:off   3:off   4:off   5:off   6:off
== END   chkconfig --list | grep -Ei 'network|wpa' ==

Also here is the link to xorg.log file as under for more information. Your guidance & help will be highly appreciated.
http://www.box.com/s/c534e7d9cd51da50ee75
Opus
 
Posts: 18
Joined: 2012/03/24 06:15:52

Re: intel 965 display options

Postby TrevorH » 2012/04/07 21:25:59

Try this

Code: Select all
yum install xorg-x11-drv-intel
cd /etc/X11
mv xorg.conf xorg.conf.20120407


Now see what happens when you (re)start your X environment.
User avatar
TrevorH
Forum Moderator
 
Posts: 9166
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: intel 965 display options

Postby Opus » 2012/04/07 22:27:30

TrevorH wrote:
Try this

Code: Select all
yum install xorg-x11-drv-intel
cd /etc/X11
mv xorg.conf xorg.conf.20120407


Now see what happens when you (re)start your X environment.


Nothing happened :). As these are kernel mode drivers, so if i try this package xorg-x11-drv-intel-2.18.0-1.fc17.x86_64.rpm then what would be the consequences? Fatal? If not fatal to corrupt the installation then may I try those? I know that the drivers shipped with kernel 2.6.35 were fine.

[root@xenon X11]# yum install xorg-x11-drv-intel
Loaded plugins: fastestmirror, priorities, refresh-packagekit, security
Repository google-chrome is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirror.averse.net
* rpmforge: ftp-stud.fht-esslingen.de
* updates: mirror.averse.net
adobe-linux-x86_64 | 951 B 00:00
base | 3.7 kB 00:00
epel | 4.0 kB 00:00
epel/primary_db | 4.3 MB 00:34
google-chrome | 951 B 00:00
rpmforge | 1.1 kB 00:00
updates | 3.5 kB 00:00
1232 packages excluded due to repository priority protections
Setting up Install Process
Package xorg-x11-drv-intel-2.16.0-1.el6.x86_64 already installed and latest version
Nothing to do
Opus
 
Posts: 18
Joined: 2012/03/24 06:15:52

Next

Return to CentOS 6 - General Support

Who is online

Users browsing this forum: P_I and 12 guests