boot and system extremly slow - grub loading stage 2

Issues related to hardware problems

boot and system extremly slow - grub loading stage 2

Postby cedega » 2010/11/24 08:51:05

Hello,

I have yesterday installed CentOS 5.5 on my dell netbook and wanted to tell you my experiences. Perhaps it helps to make centos better:

First of all: My system boots extremly slow!!! It stops first at loading nash than udev a long time. But also when it is booted the system is extremly slow. At the moment I do updates and the system is so slow that it tooks a minute to start gedit! Has anybody an idea how to make it faster?

After the installation grub was not installed correct. It hangs on GRUB loading stage 2 and doesn't start the boot. I could solve this problem as described in the forum with startin from rescue cd (linux rescue) and making a grub-install /dev/hda. But perhaps there is an opportunity to solve this problem in the next releases out-of-the-box? For a Linux new user this a really problem.

Wireless I could get to work with the wiki article about Brodcoam Wireless. What I have to mention is that the link from /lib/modules/build to /usr/src/kernels/2.6**** was wrong and so first I couldn't make the driver and I had to set a new link to the right direction (ln -s) before installing. But now wireless works fine.



PS.: I attache the dmesg output. If you need further infos, let me know which infos I should send
cedega
 
Posts: 6
Joined: 2010/11/24 08:27:20

Re: boot and system extremly slow - grub loading stage 2

Postby cedega » 2010/11/24 12:32:16

here is the content of the ./getinfo.sh all:

It would be great if somebody could help me to make the system faster. Thanks a lot! If you need more informations, please let me know:

Information for general problems.
Code: Select all
== BEGIN uname -rmi ==
2.6.18-194.el5 i686 i386
== END   uname -rmi ==

== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END   rpm -q centos-release ==

== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END   cat /etc/redhat-release ==

== BEGIN getenforce ==
Enforcing
== END   getenforce ==

== BEGIN rpm -q yum rpm python ==
yum-3.2.22-26.el5.centos
rpm-4.4.2.3-20.el5_5.1
python-2.4.3-27.el5_5.3
== END   rpm -q yum rpm python ==

== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
== END   ls /etc/yum.repos.d ==

== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
distroverpkg=redhat-release
tolerant=1
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1

# Note: yum-RHN-plugin doesn't honor this.
metadata_expire=1h

# Default.
# installonly_limit = 3

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END   cat /etc/yum.conf ==

== BEGIN yum repolist all ==
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * addons: centos.intergenia.de
 * base: centos.intergenia.de
 * extras: centos.bio.lmu.de
 * updates: centos.bio.lmu.de
repo id                      repo name                            status
addons                       CentOS-5 - Addons                    enabled:     0
base                         CentOS-5 - Base                      enabled: 2,599
c5-media                     CentOS-5 - Media                     disabled
centosplus                   CentOS-5 - Plus                      disabled
contrib                      CentOS-5 - Contrib                   disabled
extras                       CentOS-5 - Extras                    enabled:   337
updates                      CentOS-5 - Updates                   enabled:   793
repolist: 3,729
== END   yum repolist all ==

== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END   egrep 'include|exclude' /etc/yum.repos.d/*.repo ==

== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END   sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==

== BEGIN cat /etc/fstab ==
LABEL=/                 /                       ext3    defaults        1 1
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
LABEL=SWAP-hda3         swap                    swap    defaults        0 0
== END   cat /etc/fstab ==

== BEGIN df -h ==
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda2             6.3G  3.1G  2.9G  52% /
tmpfs                 501M     0  501M   0% /dev/shm
== END   df -h ==

== BEGIN fdisk -l ==

Disk /dev/hda: 8012 MB, 8012390400 bytes
255 heads, 63 sectors/track, 974 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1               1           3       24066   de  Dell Utility
/dev/hda2   *           4         847     6775808   83  Linux
Partition 2 does not end on cylinder boundary.
/dev/hda3             847         975     1024000   82  Linux swap / Solaris
Partition 3 does not end on cylinder boundary.
== END   fdisk -l ==

== BEGIN blkid ==
/dev/hda3: LABEL="SWAP-hda3" TYPE="swap"
/dev/hda2: LABEL="/" UUID="78913060-899a-4cdf-a231-f600a3d1fdfa" TYPE="ext3"
/dev/hda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07D9-0306" TYPE="vfat"
== END   blkid ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.18-194.26.1.el5
kernel-2.6.18-194.el5
kernel-devel-2.6.18-194.26.1.el5
kernel-headers-2.6.18-194.26.1.el5
== END   rpm -qa kernel\* | sort ==

== BEGIN lspci ==
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
== END   lspci ==

== BEGIN lspci -n ==
00:00.0 0600: 8086:27ac (rev 03)
00:02.0 0300: 8086:27ae (rev 03)
00:02.1 0380: 8086:27a6 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.2 0101: 8086:27c4 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
03:00.0 0280: 14e4:4315 (rev 01)
04:00.0 0200: 10ec:8136 (rev 02)
== END   lspci -n ==

== BEGIN ifconfig -a ==
eth0      Link encap:Ethernet  HWaddr 00:26:B9:95:A1:09 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:50 Base address:0x4000

eth1      Link encap:Ethernet  HWaddr 90:4C:E5:50:16:C5 
          inet addr:xxx.xxx.x.xxx  Bcast:xxx.xxx.x.xxx  Mask:255.255.255.0
          inet6 addr: fe80::xxx:xxxx:xxxx:xxxx/xx Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:277843 errors:0 dropped:0 overruns:0 frame:52611
          TX packets:140074 errors:38 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:403149908 (384.4 MiB)  TX bytes:11513969 (10.9 MiB)
          Interrupt:169

lo        Link encap:Local Loopback 
          LOOPBACK  MTU:16436  Metric:1
          RX packets:3231 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3231 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4433600 (4.2 MiB)  TX bytes:4433600 (4.2 MiB)

sit0      Link encap:IPv6-in-IPv4 
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

== END   ifconfig -a ==

== BEGIN route -n ==
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
xxx.xxx.x.x     0.0.0.0         255.255.255.0   U     2      0        0 eth1
0.0.0.0         xxx.xxx.x.x     0.0.0.0         UG    0      0        0 eth1
== END   route -n ==

== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
domain Speedport_W_700V
search Speedport_W_700V
nameserver xxx.xxx.x.x
== END   cat /etc/resolv.conf ==

== BEGIN grep net /etc/nsswitch.conf ==
#networks:   nisplus [NOTFOUND=return] files
#netmasks:   nisplus [NOTFOUND=return] files     
netmasks:   files
networks:   files
netgroup:   nisplus
== END   grep net /etc/nsswitch.conf ==

== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager    0:off   1:off   2:off   3:off   4:off   5:on   6:off
network           0:off   1:off   2:on   3:on   4:on   5:off   6:off
wpa_supplicant    0:off   1:off   2:off   3:off   4:off   5:off   6:off
== END   chkconfig --list | grep -Ei 'network|wpa' ==

cedega
 
Posts: 6
Joined: 2010/11/24 08:27:20

boot and system extremly slow - grub loading stage 2

Postby gerald_clark » 2010/11/24 14:11:43

You have only 8G of disk.
How much RAM?
Show the output of the 'free' command.
gerald_clark
 
Posts: 7168
Joined: 2005/08/05 15:19:54
Location: Northern Illinois, USA

Re: boot and system extremly slow - grub loading stage 2

Postby cedega » 2010/11/24 14:51:09

Here is the output of free:
Code: Select all
                 total             used         free           shared    buffers     cached
Mem:             1025784           589316      436468          0            26220     339296
-/+ buffers/cache:                 223800      801984
Swap:             1023992          0           1023992



Thanks for your fast answer!
cedega
 
Posts: 6
Joined: 2010/11/24 08:27:20

Re: boot and system extremly slow - grub loading stage 2

Postby cedega » 2010/11/24 15:50:58

Perhaps what I should mention is, that I used with the same netbook (8GB harddisk) Ubuntu 8.04 (was pre-installed) and Fedora 14 and both were very very much faster.

After the updates that I have made today in CentOS the system boots as slow as before. The first minutes after booting is still very very slow and hangs often (e.g. when I enter my username and password in gdm) but after then the system is now a little bit faster. Not so fast as Fedora or Ubuntu but at least not so extremly slow as before.


here is my dmesg output. Perhaps this is interessting, too

Code: Select all
Linux version 2.6.18-194.26.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Nov 9 12:54:40 EST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
 BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
 BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
 BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7d60
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 259792
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 30416 pages, LIFO batch:7
DMI present.
Using APIC driver default
ACPI: RSDP (v002 PTLTD                                 ) @ 0x000f7d30
ACPI: XSDT (v001 DELL    CL09    0x06040000  LTP 0x00000000) @ 0x3f6db094
ACPI: FADT (v003 INTEL  CALISTGA 0x06040000 ALAN 0x00000001) @ 0x3f6e1bd2
ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f6e1cc6
ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f6e1d2e
ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f6e1d66
ACPI: TCPA (v001 PTLTD  CALISTGA 0x06040000  PTL 0x00000001) @ 0x3f6e1da2
ACPI: TMOR (v001 PTLTD           0x06040000 PTL  0x00000003) @ 0x3f6e1dd4
ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 0x3f6e1dfa
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3f6e1e62
ACPI: SLIC (v001 DELL    CL09    0x06040000  LTP 0x00000000) @ 0x3f6e1e8a
ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x3f6dc62d
ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x3f6dbf91
ACPI: SSDT (v002  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x3f6db118
ACPI: DSDT (v001 INTEL  CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Detected 1596.162 MHz processor.
Built 1 zonelists.  Total pages: 259792
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0768000 soft=c0748000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022696k/1039168k available (2180k kernel code, 15724k reserved, 906k data, 228k init, 121664k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.32 BogoMIPS (lpj=1596162)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0040c39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 11000
CPU 1 irqstacks, hard=c0769000 soft=c0749000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.97 BogoMIPS (lpj=1595989)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0040c39d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0040c39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Total of 2 processors activated (6384.30 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=47
checking if image is initramfs... it is
Freeing initrd memory: 2560k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: f0100000-00000000
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: 2000-0000
  MEM window: 50000000-00000000
  PREFETCH window 0x00000000f0500000-0x00000000f05fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1290612859.884:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key F757F25E1424EA0E
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [TZ01] (27 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: SAMSUNG SSD UM410 Series 2.5" 8GB, ATA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 15649200 sectors (8012 MB), CHS=15525/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Time: hpet clocksource has been installed.
ACPI: (supports S0 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 410k
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xf0444000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 225, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04711/0xa40000
libata version 3.00 loaded.
usb 1-3: new high speed USB device using ehci_hcd and address 3
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
input: SynPS/2 Synaptics TouchPad as /class/input/input1
usb 1-3: configuration #1 chosen from 1 choice
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: DUMMY
ata2: SATA max UDMA/133 bmdma 0x1818 irq 15
Initializing USB Mass Storage driver...
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.3-2
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
  Vendor: Generic-  Model: Multi-Card        Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1290612892.662:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
security:  3 users, 6 roles, 1951 types, 257 bools, 1 sens, 1024 cats
security:  61 classes, 77102 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1290612893.962:3): policy loaded auid=4294967295 ses=4294967295
ieee80211_crypt: registered algorithm 'NULL'
intel_rng: FWH not detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: RTL8102e at 0xf88fa000, 00:26:b9:95:a1:09, XID 04c00000 IRQ 50
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 233
Linux video capture interface: v2.00
sd 2:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /class/input/input3
wl: module license 'unspecified' taints kernel.
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:03:00.0 to 64
uvcvideo: Found UVC 1.00 device Integrated Webcam (174f:1403)
input: Integrated Webcam as /class/input/input4
usbcore: registered new driver uvcvideo
USB Video Class driver (v0.1.0)
ieee80211_crypt: registered algorithm 'TKIP'
eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.246.6
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
lp: driver loaded but no devices found
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
input: Video Bus as /class/input/input5
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on hda2, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1023992k swap on /dev/hda3.  Priority:-1 extents:1 across:1023992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8118 buckets, 64944 max) - 228 bytes per conntrack
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: no IPv6 routers present
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized i915 1.8.0 20060929 on minor 0

cedega
 
Posts: 6
Joined: 2010/11/24 08:27:20

Re: boot and system extremly slow - grub loading stage 2

Postby TrevorH » 2010/11/24 16:34:33

Your disk is being seen as /dev/hda which means that it is not using AHCI. Try checking your BIOS to see if there is a switch there to enable AHCI mode and then try again. Be aware that this might require you to either reinstall or take some fairly major reconstructive surgery after enabling it - booting from a rescue CD, rebuilding your initrd and edit /etc/fstab to change /dev/hda to /dev/sda and possibly other things as well.

A netbook is never going to be a speed demon but yours does sound excessively slow.
User avatar
TrevorH
Forum Moderator
 
Posts: 9116
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: boot and system extremly slow - grub loading stage 2

Postby cedega » 2010/11/24 23:08:23

Dear TrevorH,
thank you very much for your answer!
I would reinstall centos! Unfortunately I cannot find an option to enable AHCI Modus in my bios. But I remember me that fedora 14 (and I think ubuntu too) saw the disk as /dev/sda and not as /dev/hda. So I think perhaps the AHCI Modus in the BIOS is still enabled, but only centos doesn't recognize it. Is there an oportunity to give grub an option that he treat the hda as ahci? Perhaps I could try this.

Best regards, cedega
cedega
 
Posts: 6
Joined: 2010/11/24 08:27:20

Re: boot and system extremly slow - grub loading stage 2

Postby TrevorH » 2010/11/25 10:43:26

Anything in the BIOS about RAID mode?
User avatar
TrevorH
Forum Moderator
 
Posts: 9116
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: boot and system extremly slow - grub loading stage 2

Postby cedega » 2010/11/25 11:11:11

No, I have found nothing about RAID.

The Bios is a PhoenixBios and the version is A06 what is on the dell homepage unfortunately the newest version.

These are the options:
Section Main (only system time and date)
Section Advanced (Boot Time Diagnostic sreen, Quick boot mode, Intel SpeedStep Technology, On Bord Lan control, WLAN control, Bluetooth, USB BIOS Legacy support, USB wake up support, Funciton key behaviour)
Security (only Supervisor-, HDD-Password, Computrace)
Boot (here you just can change the boot order)

My netbook is a dell inspiron 1011 (Mini 10v shipped with Linux (ubuntu)
And the hdd is a samsung SSD UM410 Series -(S1) SATA1

At the installation centos 5.5 boots a driver with the name ata_piix (or something similar) and usb-storage (for the usb cd drive i think).
cedega
 
Posts: 6
Joined: 2010/11/24 08:27:20


Return to CentOS 5 - Hardware Support

Who is online

Users browsing this forum: No registered users and 1 guest